Counting matching models…
This plate / jig holds an 8oz flask for the XTool F1 laser... (About ~ 237ml) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls, honeycomb pattern… ** PLEASE: **…
This is a high quality, 1 cup / 8 oz measuring cup that I made to help measure non-food items around the house like fertilizer for plants. I would recommend to print it right-side up, with supports for the handle that you can break off…
Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…
Meet Pocket Rocket Tab, a fun and functional soda can opener and lid that keeps bugs and bees out of your drink while you're outdoors — and seals things up if you're saving that fizz for later. The "PULL" tab design makes opening cans…
This is the "back side" … In other words you can engrave the back side of the 8oz flask with this plate / jig… ( 8oz / ~ 237ml ). For use with the XTool F1 … Note: > You can print this plate in any filament you want. (However, a “tough”…
They consist of 4 cups with varying numbers of slots (2, 3, 4, and 6) and are each capable of holding a total of 8 ounces. The cups were originally designed for an artist who was working on resin pouring.
I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. October 2024 updates. Now up…
Simple boot to protect the bottle of the 18oz YETI RAMBLER water bottle. Printed with 95A TPU
Prints in place standing up with no supports. Attaches to the wall with 3 screws because overkill.
Sleeve to protect the bottom of the bottle from scratches. Print in flex filament, I used old Sainsmart TPU I had on hand. This fits the 14, 18, and 22oz bottles, larger ones have a bigger circumference and will not fit. Print…
Perfect for Holding your 8 or 8.6 oz beverage (Redbull maybe) in a Trashcan like receptacle. Included files • Step file for reference • Can Body • Lid • Wheel (print 2) Prints in 4 pieces (2 wheels, the can, and lid) and 1.75mm filament…
This is adapter for a Hyundai Tucson Rear Seat cup holder to suit Yeti 18oz/532mL Rambler.
I've created a few different bottle holders for my daughter's bottles and a friend's baby bottles. As you can see from the picture, I customized the design with her name, it's fairly easy to do in Tinkercad. Breastflow 6oz bottle has a…
I wanted something simple that would cover the top of the cup and act as a little greenhouse for the seedling. This fits a 18oz cup. Its super basic and doesn't snap on just sits on top and wont go anywhere. No supports needed .
This funnel is made to ease the filling of a 8oz (.23L) Stanley Adventure Flask. The funnel only fits on the standard mouth flask not the wide mouth. It slips over the spout of the flask with an interference fit. This means that it should…
A simple protective cover for the bottom of your Yeti Rambler. Works on the 12oz and the 18oz (pictured). Bottom of the cover is angled, not curved, for better printing. No supports required. Printed in 95A TPU at .2 in about 35 minutes.…
My KeepCup had a cork band around it. You are not meant to remove it or fiddle with it too much, but I like to live dangerously and, as a result, I broke it. You can buy a replacement on their website for 5 dollars, but that would have…
An easy and ultimate solution to store your Wood Glue upside down to always be ready to go. Must have if you work a lot with wood glues. Printing tips: Fine to print in PLA or PETG 2 or 3 perimeters will be more than enough No support…
Another handle for Yeti Rambler 12oz/18oz Hotshot (my origingal handle is here https://www.printables.com/model/619322-yeti-rambler-hotshot-12oz18oz-handle ) Best printed with supports. This is basically the same design as the handle I…
There is a product known by several names like water marbles, crystal mud and such. These are tiny polymer beads (smaller than a BB) that when soaked in water grow around 10x there size as they soak in the water, over time, the water will…
have a smaller sized build print on my printer, but the side piece have dovetail joints to make them secure with a 2 piece print. No fasteners or glue needed just a few light taps with a mallet to assemble. Need something smaller? I also…
I needed a small holder to mount inside a storage compartment of my RV for easy access when refueling. I couldn't find quite what I was looking for so I made this quick in Google Sketchup and exported the model to my 3d printer. I printed…
A SUPER stable base for a 8oz canning jar. My cat is 100% not tipping over cat grass EVER AGAIN. See original unweighted design for more details Should fit most 1.25lb and 2.5lb 1" weight plates. amazon link to 2.5lb weight pictured
We use a Keurig machine without a water storage and needed something to measure the water that didn't look like an everyday measuring cup. This will hold 8oz. to the horizontal line in the model which is the same as the fill line in our…
Uses the multi connectors. https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard Fits Titebond 8 oz bottles upside down and another one to hold the brush. No supports needed. 3 walls and .2mm layer height
Print on edge in vase mode for fastest results.
A suspended feeder for feeding slime mold to springtails, for an 8oz deli cup. This should be printed with supports enabled. The idea is that you suspend the basket over the substrate and place slime-mold covered oats in the basket, and…
This is an adapter to fit 8oz cans into a metal can coozie meant for 12oz cans. There's a spacer that fits easily into the bottom of the coozie and a shroud that goes on top of the can to securely hold the can in place. Needs no supports…
This is a simple shallow funnel that replaces the metal disk lid in common 8oz mason jars. It's intended purpose is for turning a jar into an easy ABV collector that doesn't have to be opened each time, but also not easy to spill all over
Modified one of the can holders so that it fits the 18oz round mallet from Wood is Good. With opening for easy access.
If you like this model and use it please upload a like, it really helps others find it! I wanted to keep my cpap & umbillical up and away from the print head so I made this bracket to hold the Key-BAK and then zip tied it to my…
I have a few of the Thermos 18 ounce hydration bottles and the one big gripe I have with it is that the silicone grip keeps sliding up. On the newer ones I think they tried to glue it in place. These models are for printing a retaining…
Migrating from thingiverse https://www.thingiverse.com/thing:4391619 Thermos 18oz 530ml bottle Name Tag Model HS4010FMAUS https://www.thermos.com.au/product_details.aspx?ProdID=2552&CatCode=HYDR…
This soft protective base pad is custom-designed for the 68oz (2-liter) Bivvclaz glass pitcher. 3D printed with flexible TPU or TPA filament, it adds grip, impact protection, and noise damping to your glassware. Functions: Noise Dampener:…
This is a very specific thing I made that may not be useful to anyone but just in case I'm uploading it. This is a piece that improves my creation and development of my test glazes for pottery. Specifically, it mates my 80 mesh Talisman…
When I'm doing a silicone casting project, I like these mixing cups that have measurements printed on to help get the right ratio of liquids. When I need a new cup, I like to have them within easy reach, so I designed a simple cup stack…
I don't know how well it will be washed in dishwasher but the original rubber ring is not working anymore. Use TPU or any stretching filament.
After hanging some Wera Nutdrivers I got to appreciate the slide-in hooks used by TJDesign in the Skadis system so I am using them here. It wasn't too hard to duplicate the profile. This hook fits my Estwing 8oz ball peen hammer (Estwing…
This soft protective base pad is custom-designed for the 68oz (2-liter) Bivvclaz glass pitcher. 3D printed with flexible TPU or TPA filament, it adds grip, impact protection, and noise damping to your glassware. Functions: Noise Dampener:…
This is a very specific thing I made that may not be useful to anyone but just in case I'm uploading it. This is a piece that improves my creation and development of my test glazes for pottery. Specifically, it mates my 80 mesh Talisman…
I don't know how well it will be washed in dishwasher but the original rubber ring is not working anymore. Use TPU or any stretching filament.
I'm organizing my workplace, and I couldn't find a Gridfinity holder for cans of Never-SEEZ, so I made my own! The base accepts magnets if wanted, and as most gridfinity bins; it prints well in almost any filament on any printer! Cheers,…
The Harbor Freight 8oz (236ml) Squeeze Bottles are sold in packs of three, on Amazon they are in packs of 12. So I made a single holder version on a 2x2, and a three bottle holder on a 2x5. I used a gridfinity parameterized model to start…
I needed a stand for gorilla wood glue bottle (the 18Oz / 532ml variety) but couldn’t find something that suited me, however, CYMA remix looked promising but after I printed the model I found out that the measurement are deferent between…
This is an adapter I made for the 8oz Yeti Tumbler so you're still able to use your Good 2 Grow toppers. Just use generic reusable plastic straws from Amazon, I generally buy ones taller than the Tumbler so i can trim it to size. I added…
(Fits 8oz Red Bull Cans) This is a two-piece can coozy I designed for anyone who wants to keep their drink cool and any surface they place it protected. You pop the top piece onto the can and gently thread the bottom piece on to lock it…
These are like bicycle training wheels First learn how to drink with the easy sipper lid and slowly you will build the confidence to try your first sip without the lid Happy drinking
8oz Titebond Pegboard Holder using Sy's Mounting system
I have one for my 32oz Rambler and was going to edit that but then saw this one Decieded to reduced height so it just fits over the exposed bottom steel and change the top edge to curve into the body of the bottle, as I did wiht my larger…
