13 models
TPU/PLA Bullets (8x30mm) without MMU/glue! | REMIX for Glock 19 "working toy gun" G19 note: There are 4 DIFFERENT VERSIONS of the bullet (8x30mm) , see in the picture below! Select the preferred size of the tip & bullet to match them!…
You can print the large holders on a MK3S+ without skirt and brim.
ANL Fuse Holder Base for M8x30 bolt, based on original from Mike Morin Added a optional 2 mm insulating base plate to prevent the bolt heads from making electrical contact with the mounting surface.
Staubschutz für die Okularseite. Einfach raufdrücken - hält von selbst. Dust protection for the eyepiece side. Simply press it on - holds by itself.
I lost my lens caps to my Swarovski SLC 8x30WB binoculars, so designed and printed replacements using Fillamentum FlexFill TPU 98A on Prusa Mini with 0.6mm nozzle and 0.2 layer height with 30% infill (not that it uses the infill at all).…
I lost one of the covers for my binoculars so decided to design and print a replacement. Printed in PETG because PLA can soften in hot cars.
This is a spare part design of the battery cover of the Swarovski Laserguide 8x30 which unfortunately got lost. The part shown was printed in PETG using the Prusa textured PEI. This fits quite well to the device.
Handy for rerolling bigger themal paper from bigger, cheaper rolls onto the smaller roll format used by printers like the QR204 without creating messy rolls with inconsistent winding. For rerolling just use the alignment helper on one…
The platform lifts the box by 30 mm with cat paws. The full size is 306 × 288 mm , but the model is split into 4 parts, so it fits on small printers. Each section connects using a dovetail joint , so the whole thing locks together…
Eyecup Spacer for Swarovski Habicht 8x30 W (Binoculars) This spacer was specifically designed for the Swarovski Habicht 8x30 W binoculars. It is installed between the binocular body (eyepiece) and the rubber eyecup to noticeably increase…
I wanted to use the bars of an IKEA MULIG clothes rack as a hanging rod in a niche between two walls. The original bars are longer than the gap between the walls, so I cut them down to length with a saw. That leaves raw, open ends that no…
Eyecup Spacer for Swarovski Habicht 8x30 W (Binoculars) This spacer was specifically designed for the Swarovski Habicht 8x30 W binoculars. It is installed between the binocular body (eyepiece) and the rubber eyecup to noticeably increase…
