56 models
Print a red leaf and a black top , put it together with a green filament And now a geen leaf, glue it Or put a pin on it for a lapel on jacket If you like it , give me a like.
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 95mm wide. Print time approximately 2 hours 50 min. with a single wall. The photo shows the vase printed in vase mode. It can be printed in…
i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…
This model is compatible with the lego system.
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
Adapter for HP Proliant GEN8/GEN9 2.5 to 3.5 TRAY CADDY, 661914-001 Needed to install 2.5" drive in 3.5" tray caddy Print with 50%+ infill for good screw holding 2 versions: solid and lightened
Float level gauge for Rotax 912/914 carburetors. P/N: 877 730. Made from ASA.
When you have a tool and a component breaks, it can slow down your entire project. Even if the part is inexpensive, if you are ordering the part you still have to wait for it to be delivered. My 10" Ryobi Drill Press (DP103L) Depth…
Hi 3D printing friends! This design is a cupholder that fits a Porsche 914 center-console but could essentially slide onto any vertical piece of material of similar thickness. It was designed to be removed easily in the event you want to…
This is a remix of Saunick's Twilight Imperium 4th Edition (TI4) war sun unit for FDM printing. https://www.thingiverse.com/thing:4191414 I found that the original model was too small for durable, usable fdm prints so I made an effort to…
This is a phone holder ashtray for the Porsche 914. It's designed to accepted phone mounts made for air vents. It's a straight drop in for the factory ash tray. Instead of trying to solve the problem of the mount, this ash tray is more of…
A vertical and horizontal tool holder for the Harbor Freight Torx socket set 67914
Buddy with a 914 kept showing up with spilled coffee and it gave me this idea. Retains heater lever functionality. Super easy print but you should probably use material that'll put up with sitting in the sun. Since my buddy is a stickler…
This model is compatible with the lego system.
Danke an Astraholic05 für die genaue 1:1 Kopie des Original-Clips! Ich habe versucht, diesen Clip zu drucken und zu verwenden, aber das Original-Teil ist für den 3D-Druck nicht optimal, deshalb sind die Halte-Nasen ständig abgebrochen.…
Backstory: This part is a replacement for the jack plug covers found on a Porsche 914 (and other vehicles). I made this part for my Dad, after helping him jack his car, and noticing that the original caps don't fit in very tightly. While…
Lego 3027 3028 3033 3036 3456 41539 92438 91405
No special settings are needed, I printed in silk PLA (silver) and this badge / emblem is used on a tool box as decoration.
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
I was unhappy with how the other models looked so i recreated it. Pretty much 1:1 to the OEM version
Modified parts only - brass inserts replaced by M3 nuts
This is a spare part printed for an old Porsche 914. The original part (last photo) was fit into a rectangular hole in the car body in order to hold a screw screwed threw the number plate. The originals were quite loose and couldn't grab…
This fixes a common fault on Dysons DC24 where the ball becoming loose and clunky and gets significant play up and down on the left side of the ball if you look at it from the front. This play can cause the ball to catch on the HEPA…
This is an insert for the center console gauges for a Porsche 914. If you have aftermarket 2 1/16" VDO gauges and a factory 2 ½" hole center console, this is the model for you. Can be used for any vehicle gauge but was originally made for…
riproduzione granata da fucile ww1
Lower Rank of the Mounted Police Guard, 1914 Category: People
Classic VW-Porsche 914 Roadster https://en.wikipedia.org/wiki/Porsche_914 Category: Vehicles
Switch Key for 1914-1920 Ford Model T. Drawn to the original prints. If you happen to lose your original key, and don't want to wait to order a new one from Lang's!
Should fit for part numbers: 914 512 263 11, 914-512-263-11, 914-512-263-11-OEM, 914.512.263.11, 91451226311 3D printed to repair an old porshce 914.
Made the single holder into a quintuple. 0.2 Layer height no supports
My drill press has a 65mm stand, so I made this adapter for the 72mm clamps.
This is a cookie cutter for a 4-lug Fuch wheel
Needed a rainhat for my Weber carburetor and didn't want to spend a bunch of money so I designed these. Fits 40IDFs velocity stacks as far as I know. Added the Porsche 914 script for some flair.
Can be secured by screws or glue, support not needed. For more details, print in 0.1mm layer hight. Recommended wiring diagram:…
This bracket allows you to lower the Fellowes keyboard holder model 9140305 another 1.33" longer than the longest adjustment hole for the OEM bracket. This can help if you have a lip under your desk. This is a total of 4.64" from to the…
This model was created to replace the factory slider that often breaks in the 914 outside handles. These are available online but part of the metal mechanism on my 914 broke and this design attempts to mitigate that issue. It was printed…
Single 1x1x5 bin customized for a Rowenta Shaver.
This was created to replace the broken rubber holder for a 914 convertible lid. It was printed in TPU 95 using manufacturer recommended settings. The stainless steel bushing was purchased from a local hardware store, 6mm inner diameter.…
Just an ancient bicycle bell lever. Replaces broken one. Print with small support under spring hook. Original lever had this hook at the bottom of model, but then the spring is scratching metal base which was not professional in my opinion.
I really loved patch from Ukrainian telegram Chanel "Ukrainian Sich Shooters”, and so I decided to make my version of it on my 3D printer. It isn't 3D scan, this model was traced in blendet by me, and I think that original model that I'm…
Printed in PETG on its side for strength. Doesn't fit as well as the factory nylon clips but might be good enough.
kexcelled the K5 PLA Champaign Gold and PLA Sparkle Sternenschwarz temp : 220 C° bed : 70C° infill : 25% support tree
Rocket ship #2 based on a photograph of the 1914 model made by Tsiolkovsky. Dimensions are based on a drawing from the Spaceship Handbook by Jack Hagerty and Jon C. Rogers. The stl files are at 1:150 scale; however I printed mine at 150%…
Halter für Lampe Richter LED-A-500-B-E-R-VX Artiekl-Nr: 109146
P-79142 Screwdriver & Ratchet and the clip breaks right away here is a my version of a replacement clip. Needs someone better with cad than me but works and so far hasn’t snapped
This is an training model made in tnkercad
Float level gauge for Rotax 912/914 carburetors. P/N: 877 730. Made from ASA.
No special settings are needed, I printed in silk PLA (silver) and this badge / emblem is used on a tool box as decoration.
Lower Rank of the Mounted Police Guard, 1914 Category: People
![Twilight Imperium War Sun Unit for FDM [thing:4191414 remix]](https://media.printables.com/media/prints/324342/images/2796301_47c38599-b315-4cbc-af3d-71be66029c34/pxl_20221124_212122224portrait.jpg)
