Search results: 92x

7.92x57mm Mauser Cartridge

The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge that was used as the German service cartridge in both World Wars. Category: Sport & Outdoors

7.92x57mm Mauser replica and snap cap

7.92x57mm Mauser, also known as 8mm Mauser, 8x57mm, or 8x57 IS, is a centerfire rifle cartridge designed in Germany by the Gewehr-Prufungskommission in 1903. Print this for props, display, education, training, just because it's cool, or…

NAS R1 R7 Topton Aoostar Kingnovy riser for 92x92x25mm and-or 120x120x25mm fans

Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…

Ski boot dryer with 12VDC FAN 92x92mm

During winter fun in the snow, shoes often get wet. That's why I designed and built a 3D printer dryer for two pair of shoes with 12VDC fan 92x92mm and flexible corrugated hose diameter 32mm. Can be used in a car or caravan with 12VDC…

Mean Well LRS-350 PSU Lid for 92mm Noctua Fan (92x92x25)

This is a remix of the "Mean Well LRS-350 PSU Lids for 92mm Noctua Slim Fan" ( https://www.thingiverse.com/thing:3197058 ) with the following changes: fits a 92x92x25mm Noctua fan 1.2mm wider lid to work with newer models of the LRS-350…

Anycubic Vyper 92x14mm fan and OctoPi upgrade

Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…

Frame for LED panel P3 64x64pix 192x192mm P3(2121)-32S-192x192-v8.1

Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…

PSU Cover For Ender-3 V2 - Noctua NF-B9 Redux (92x25 mm)

This is a remix of TremorRs "Ender 3 V2 PSU Cover Noctua Fan Remix". I made an alternative design for the Main PSU Shroud and the Fan Housing. You have to glue the parts together, just as in TremorRs design. Print the Main PSU Shroud flat…

FlashForge Adventurer 3 bottom cover/lid for Noctua NF-A9x14 fan (92x92x14mm low-profile)

This is my second (and probably my last) iteration on the bottom cover and fan of my FlashForge Adventurer 3 (Monoprice Voxel). A few months ago I shared a similar design for 40mm and 80mm fans. Those improve the airflow around the…

7.92X57 Mauser Stacking Loading Block

7.92X57 Mauser stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Anycubic i3 Mega/S PSU Cover for 92x92x14 Fan

Thanks to Nixxon999 for the remix and kuehmayer for the original design! I closed the top holes so that there will be a (hopefully) better airflow in the PSU. The Fan should be mounted to blow the air out of the case, so the holes can…

E3PRO Meanwell LRS 350 24V FAN COVER (92x25, 92x14, 80x25)

Just another PSU fan cover for E3PRO Meanwell LRS 350 24V. I did not like any model so I made this one from scratch with some Witcher features, but uploaded “classic” version for not Witcher fans. Use supports. Tested with 92x25mm Noctua…

Qidi X-MAX3 back cover for bigger fan 92x92x25mm

it was print with printer model Qidi X-MAX3 and it sit made for fan 92x92x25mm Noctua NF-B9 redux-1600, it is necessary to reduce the voltage from 24V to 12V, therefore there is a box for a DC/DC converter (MP1584 DC-DC Step Down Power…

Beretta 92X Performance

A detailed 3D STL model of the Beretta 92X Performance pistol designed for viewing, display, holster making or educational purposes. The file contains the external geometry optimized for slicing and printing on Prusa 3D printers.…

LSI 9300-16i 92x92mm Fan Mount

I found trying to install a fan was a bit too tedious especially when the wiring can get jammed so easily between the fan's frame and the shroud. So the fan's mounting points were moved from the front to the back and the shroud that…

7.92x57mm Mauser Cartridge

Box with slots (40x192x30mm - 19 slots)

I designed this box with 19 slots to store the traffic signs (Preventive) that I uploaded here previously --> https://www.printables.com/es/model/549202-traffic-signs-for-scale-models-and-key-ring-set-of Of course, it can also be used for…

7.92X57 Mauser Vase Mode Stacking Loading Block

7.92X57 Mauser Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…

artic Freezer 7 to 92x92 fan

adapter for a standard 92mm fanm, original is small, -2mm

kryt ventilátoru 92x92mm

Tisk z PLA výplň 10%

Ender 3 V2 PSU Cover 92x25mm Fan

Printed in ABS, I experienced some warpage, PETG might be more appropriate given the orientation required to fit this on the Ender 3 bed

7.92x94mm Panzerbüchse Cartidge

Anycubic I3 Mega - Noctua 92x92x14 Board Fan Mount

I tried several other fan mount solutions for my combination of my Noctua fan with the very high build heatsinks of my stepper drivers. But there was not enough space for the fan left, so I designed this solution using the build-in fan…

AXP90-47 tool-less bracket for Noctua 92x14

Would recommend printing in PETG as it will get hot and warp otherwise.

GeForce RTX 3080 Ti GamingPro 92x25 3 fan shroud

special thanks for RejZoR for inspiration I encountered high temperatures on my 3080ti GamePro even after replacing the paste and thermal pads. I found a RejZoR solution for mounting three 92x92x25mm fans instead of the standard ones.…

FoodSaver VS1192X shelf support

Hi!! This is a support to store the FoodSaver VS1192X over a shelf. I use this pump to vacuum packing my filament spools :) The support is designed for a 55mm width shelf… I include the Fusion360 file :)

50mm Fan Bracket For LSI 92xx SAS HBA PCIE Card

This is a bracket to mount a 50mm PWM fan to the heatsink of an LSI 92xx SAS HBA card (LSI-9211-8i shown). May not fit all variants of this card as there are several variations on the heatsink shape and card layout. The bracket slides…

7.92X57mm Mauser, Double Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…

GeForce RTX 3080 Ti GamingPro 92x25 3 fan shroud

special thanks for RejZoR for inspiration I encountered high temperatures on my 3080ti GamePro even after replacing the paste and thermal pads. I found a RejZoR solution for mounting three 92x92x25mm fans instead of the standard ones.…

Hub75 192x96 Bracket LED Panel

This bracket allows you to connect two Hub75 192x96mm panels together A printable bracket for connecting and mounting Hub75 192x96mm LED Panels

7.92X57mm Mauser, Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…

7.92X57mm Mauser, Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…

7.92X57mm Mauser, Double Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…

7.92x107mm DS/7.92x107mm Polish Anti-tank Maroszek Cartridge

Model of the 7.92x107mm DS cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…

7.92X57mm Mauser, Double Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…

C92X Longer Spacer Arm

I needed a longer arm for this mount, so I simply doubled the length in Tinkered

Orico dock 92x25mm fan conversion base

Short story: I bought a dock, the fan's noise annoyed my waifu so I spent a lot of time designing a whole upgraded bottom piece for the dock to enable upgrading to a much bigger and quieter fan. Should be easy to print and with the…

Aquarium cooling fan - 92x92x25mm 3mm glass

Designed this to encounter high outside temperatures, because my aquarium has gone up to almost 31*C. It's designed to 92x92x25mm outside diameter computer fan and 3mm glass. Printing: Lay it flat on build plate. Should print without a…

7.92X57mm Mauser, Double Latch, PIP Hinge Modular Ammo Box

This version has these improved features: text for multicolor ramped hinge fixture for easier assembly either square or round dividers Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118…

7.92X57mm Mauser, Double Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

7.92X57mm Mauser, Pocket Snap Latch Modular Ammo Box

This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…

7.92X57 Mauser, Pocket Spring/Snap Latch Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…

Battery Cover for Schonstedt GA-92XTd

This is a battery cover for the Schonstedt GA-92XTd. I needed one after I had to break the old cover to open the device for repair. It was only working when not extended, but there was a really simple fix: replace the standard 55cm 1mm…

On-Off-Volume Button Cover for Schonstedt GA-92XTd

Lost the cover for the button for my Schonstedt GA-92XTd volume and power control. Although this should work for any ±3.2mm push-pull to turn off/on and rotate to do something pin. It's designed to hold onto the pin with 2 M2x12 screws…

7.92X57mm Mauser, Spring/Snap Latch, PIP Hinge Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…

Bonsai pot 16 cascade round curved 92x92x193mm

A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

7.92X57mm Mauser, Double Spring/Snap Latch, PIP Hinge Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…

7.92X57mm Mauser, Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

7.92X57mm Mauser, Recessed Spring Latch Modular Ammo Box

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

7.92x33mm Kurz Cartridge

Model of the 7.92x32mm Kurz cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…

7.92X57 Mauser, Recessed Double Snap Latch Modular Ammo Box

These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…