Counting matching models…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Hi Craig, This was all I had, hope it was what you were after, Cheers Jace https://en.wikipedia.org/wiki/TT\_pistol
Own a legend of automotive performance with this 3D printable STL model of the Porsche 911 Turbo (930). This classic German performance car model is perfect for automotive enthusiasts and fans of iconic 70s and 80s supercars, showcasing…
Porsche Wall Art size: 80 cm Separated in 4 parts, so they fit perfect on your mk3. Of course you can scale the model Add some double-sided tape and sick it on the wall. Invisible and easy to remove. Post your print and enjoy.
This design of a M6 nut tries to follow the standards of ISO4032 and DIN934 as closely as possible. The thread is designed to fit to a M6 screw with exactly the same mechanical play as a metal M6 nut (when printed in PETG on a Prusa i3…
You can now print it on the sloped, upper side to get a much better look! I could reduce the print time and used material by using the shell-command. If you use the textured PEI-sheet, you might get a nice finish on the upper side. So I…
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This model is compatible with the lego system.
**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…
In honour of Pokemon Go's January(?) Community day I have knocked up a Piplup one piece and multi-material model! Print instructions Category: Creatures
Československý motocykl vyráběný v letech 1935-1946. Motorka měla tradiční černé barvy, verze Special se lišila chromovanými detaily a ráfky. Pozdější verze měly nožní řazení, z počátku výroby se dodávalo řazení ruční vedle nádrže.…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
This model is compatible with the lego system.
The LSI 9300-16i HBA is a wonderful choice for DIY NAS enthusiasts, but outside of data center with frigid climate control and numerous fans pushing air over its heatsink, it tends to get warm. This shroud clips around the LSI 9300-16i's…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Collection of screws (ISO 4017 / DIN 933) including : M6x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA By Ed van der Heijden In the year 1930, the magnificent Benley Bleu Train embarked on a journey that would etch its name in the annals of luxury…
Collection of metric nuts including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M30. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes…
This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
Collection of screws (ISO 4017 / DIN 933) including : M8x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…
This model is compatible with the lego system.
A holder for a Logitech C920/C930E webcam without the heavy base for a Prusa i3 MK3/MK3S X-axis nema 17-motor. Uses the original hinge to keep tilt functionality. Last picture is from the webcam. It requires disassembly of the camera, but…
English: This is a hook for the channel rail of a Thule Omnistor 9200/9300 awning. It features a a bracket for some fairy lights. I use this fairy lights with the hook Camplight:…
Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
This model is compatible with the lego system.
Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…
M10 bolts from 20 to 50 + nut DIN 933
BMW E90 E91 E92 E93 Cupholder for 0.5 l PET and RedBull can
A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
This model is compatible with the lego system.
Blueprint généré à partir d'une image SVG. Changement de couleur au layer 11 (couche de 0.2mm)
Porsche 930 Wall Art Easy to print for up to 1m length (6 parts) on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible…
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hi Hunter, you asked if I had a T-51 suit and I do, unfortunately it needs a lot of work for which is a little out of my league and time wise. Hopefully you or some one else will take the time to improve on it and reupload here for all to…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Certainly! Here's an overview of interesting facts about the 1910 Ford Model T Dump Truck: Innovative Design : The 1910 Ford Model T Dump Truck…
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Sure, here's a brief overview of the 1930 steamroller "The Old Smokey" in English: "The Old Smokey," built in 1930, is a historic steamroller…
can be printed together or separately in other colours Print in place kit card , Assembly required need to use a support easy to assemble
Designed this for Alpine R series 6.5" woofer and 3" midrange speakers. But, may work for other speakers with same bolt pattern. The pod retains the factory speaker angles relative to the door, but adjusts the depth to provide clearance…
Another remix of my "A-140Z atypical" bunker. This is the D type , a small variant, like one half of the larger A type, with just one gun and four crew members. There were two subvariants, D1 and D2, mirrored versions of each other, with…
Fits pretty much perfectly into the bestway flowclear pump model 58381. As far as I can work out, it is the Type I Version of the filter with model# 58093 which is 80mm in diameter and 90mm tall. Print two caps out of tpu and the inner…
Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
7 different versions of small parts bins for the famed Harbor Freight portable parts storage cases (#93928). These portable cases are the best you can buy for the money right now compared to the much more expensive Sortimo cases and…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
LSI 9305-16i or LSI 9305-24i fan shroud. This is a remixed design from barichardson with most overhangs removed to be more easily printed. Snaps onto the heat sink without the use of screws. Four STL files for both the 16i and 24i with…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
This model is compatible with the lego system.
A remix of my "A-140Z atypical" bunker. This is the A-160Z , in contrast with the previous model, this is a pretty standard specimen of the A-160 type (which was the most common of all types). --- Varianta mého předchozího modelu…
My wife asked for something that allows her to block her 9315 XPS Webcam, and this was the result. It fits the laptop neatly, not too tightly, blocking the entire array of sensors at the top without interfering with the screen. I…
Food Safety, PLA is generally considered to be food safe. Double check to make sure you are using non-toxic materials for any prints you intended to use with food. I am not a baker and getting the perfect consistency of dough to work with…
Here are 2 files to of the same basic design. One shade has the grooves going in and the other shade has grooves popping out. I just turned the design in side out. There are no wires to cut, splice or solder together to make a base. It is…
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Recently I made a retro-futuristic rocket ship model . That model was fairly simple in design, and it inspired me to try something a bit more complicated and a lot more retro. The model here is my attempt to recreate the rocket ship shown…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
HueForge - Emblem des Fußballclubs VfB Stuttgart 1893 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you've got a set of wheels that have somehow lost their centerpiece or the plastic tabs have broken off, then this Porsche Wheel Center Cap is a perfect replacement; Print as is or customize it with your own logo/text. It has a 77mm…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I want to put my rear speakers on the wall, without spend money in an official rear mount. And I need that wall mount should be easy to remove the speakers. Then I made it. Is necessary put the bottom to avoid torque in the mount. Maybe…
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
This is a ~13cm high model of Dean Winchester from Supernatural, originally created by Eoten93. It has been optimized for fdm printing by scaling it up and slicing dean in half. Additionally i have separated and modeled a new base that…
This model is compatible with the lego system.
This is a collection of knobs for M3 to M6 DIN 933 hex screws. In each dimension there are 2 different knurled designs to choose. The knob dimensions are described in the table on the picture 2. To calculate the visible thread, you must…
I modelled a mirror accessory / keychain for E90 series fans. Easy to print, no support required. Enjoy, happy printing!
Compatible with ESPHome and Home Assistant Description This STL model is designed to house a custom display that integrates an ILI9341 screen with an ESP32 microcontroller. It is ideal for users who want to show Home Assistant data or…
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…
Printed with 3+ perimeters for strength (.4mm or .6mm). PETG is ideal for being robust. Remove receiver pins x 2, and replace with #10-32 x 1-¾" bolts using slim nyloc washers on the back. Good retention for 3" 00 shells and others of…
This model is compatible with the lego system.
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A fully printable collection of Hex Keys, designed according to DIN ISO 2936 (formerly DIN 911), ranging in size from 0.7 mm to 24 mm. Size L1 (mm) L2 (mm)…
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
You can place the lego minifigure on the stand It’s stable and balanced enough that it won’t fall forward, so you don’t need to worry about it There is a version without the logos so you can download it as well if you want Feel free to…
Bruder Front axle for John Deere 7930 If you like it, press like it ;-) After only the axis was broken, i designed it to be printed. Therefore you need not to buy the parts which are not broken, rims, tires and so on 🙂 Fits to the Bruder…
This 3D-printed case is specifically designed for the MRA193A PD Board, a USB Type-C voltage and current tester supporting 5-20V adjustable charging. Pinterest The case provides robust protection while allowing easy access to all…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
