Counting matching models…
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA In the quaint town of Bellissimo, there was a charming Fiat 500 named Bella. With her vibrant red paint and retro design, she turned…
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
This model is compatible with the lego system.
Highwayman from Fallout 2, styled as a pre-war vehicle. Wheels in this case are donated from 1970 Chevelle Super Sport wagon pictured behind it in the second photo. Recommended remixes: Highwayman: Post war. Redo trunk and make thing…
If u wan't print this take patience. All print's (except wheel) hyper pla on k1 max. Read extra comment on model to print, one or more models need scale in slicer. Used components: ~1Kg Hyper Pla M3 screws (16mm or 20mm) x14 M2 screws…
IMOPORTANT: The wagon in the pictures is neither mine nor contained in the files. I added it for display purposes only. Inspired by photographs of custom built boats, I decided to create a 3D replica to be placed behind an '59 Impala or…
This is an additional version of Part 3 and 4 of the NCC-74959 Voyager. Displaying the model in warp flight with lifted warp nacelles. You will need Part 1 and 2 from this version:…
🚗 Ford Anglia 105E (Debut in 1959) The Ford Anglia 105E is the most iconic and recognizable version of the Anglia, notably due to its distinctive, negatively sloped rear window. Production: Started in October 1959 and lasted until 1967.…
Wall Art Silhouette model of the Ducati 959 Panigale Corsa Superbike. Adjustable size. I accept model suggestions.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Print setting recommendations: Make sure bridge supports are on for the top piece Print with the outside down Print in a high temp filament in case your keys get left in the car or sun (i used ASA) When disassembling your remote I suggest…
Iconic Movie Moments - Ben-Hur - The Chariot Race - 1959 3D printable model.
Ben Hur - Charlton Heston - 1959 3D printable model.
The Adventures of Rocky and Bullwinkle and Friends - 1959 3D printable model.
This is a set of files for improving the steering angle of the Wltoys a979 (also for a959 and a969). This model's steering system articulation is way too low and the wheels may only turn 10-15 degrees most which causes the turning radius…
Cadillac Eldorado Biarritz 1959
Rocky & Bullwinkle Show - Boris & Natasha - 1959 3D printable model.
The Twilight Zone - Twilight Zone Collage - 1959 3D printable model.
North by Northwest - 1959 3D printable model. Be very careful removing the supports from the plane, it is very fragile. You will need to come up with your own way to support the plane.
The Twilight Zone - 1959 3D printable model. Easy to print, just size it to your needs and go! This is a large model and will take a long time and a lot of material to print.
LEGO Commer TS3 Ecurie Ecosse 1959
Krabicka pro pajeci stanici z Aliku . Tiskne se na vysku, posazene na zadni stranu. V pripade potreby k dispozici link pro upravy - onshape . Velikost vnitrniho prostoru 122.6mm x 90mm.
Wltoys A959 series have 7mm hex which is not very common. There are various wheel alternatives with 12mm hex. This part enables the use of 12mm hex wheels with A959 series.
Why: I picked up a Craftsman air compressor model 921.152101 for free - it ran but wouldn't build pressure past 40psi. Upon disassembly, I discovered blown pump gaskets. Why buy when you can make? So, I whipped these up in CAD (15…
It is more and more difficult to find these "vintage" wheels so I've decided to design my owns and share. They are similar to the original one, but not the same. They are beefed up in order to be strong enough to be printed with not many…
This is my try to get a 3D printed tires for my 959 restoration project. They work pretty well for a shelf queen, not sure for a runner, but your are free to try and let me know! AM design has been optimized for 83A TPE material.
Rangers FC round and square beermats. Created in Fusion 360. These are printed 95mm x 95mm x 2mm To print the round 1959 Crest beermat, simply do not load the White Outside .STL For plenty of other multi-colour beemats, go here:…
As I have not found anything comparable, here is a model that allows two additional 3.5” hard disks to be mounted in a Fujitsu P759 P758 P959 P958 and similar. Apart from the mounting of the hard disks in the bays, the model is completely…
Iconic Twilight Zone Characters - Henry Bemis - 1959-1964
LED Holder for WLToys, DAZHONG, Vortex type A959 RC Car. Fits lights here https://www.amazon.com/gp/product/B013SSO70Y/ref=oh\_aui\_detailpage\_o01\_s02?ie=UTF8&psc=1 Probably works with other lights. Print instructions Category: R/C…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I think I vacuumed up the plate from my WEN 3959 9-inch bandsaw. Whoops! Here's a replacement. I was going to make a version with flexures that would clip in place, but then I realized that a jam-fit was faster to model and more efficient…
Iconic Twilight Zone Characters - Eye of the Beholder - 1959-1964
wheels for wltoys a959 on snow or sand. 7mm hex (stock).
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings. I whipped these up and they work great. Note they may not fit the a9x9b series.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cadillac Miller météor 1959 ECTO 1 Ghostbusters A redimensionner et couleurs selon votre gouts Monochrome mais peut être peint
A9x9-20 Servo Arm spare part for Wltoys Print Settings Printer: forkLIFT MK1 Rafts: No Supports: No Resolution: 0.3 Infill: 100% Filament: 3DFila PETG Golden Notes: Printed with ABS outlasted the original part and should be even better…
Central emblem of a 1959 Rockola 1475 ST stereo Jukebox. The emblem is very similar to the one belonging to a V8 Cadillac vehicle. The arms were bisected to be able to be printed on a surface area of 200x200mm, (almost any FDM 3D…
to make the suspension stiffer - 6mm Category: R/C Vehicles
I'm really lazy with this one
Remodeled for the 1959 Karmann Ghia logo
A simple accessory tray that snugly snaps on to the top of your soldering station to keep parts from jangling around in a drawer or all over your desk. Just snap the legs onto the soldering station and use superglue to attach the top…
Labor Ständer für 16x1,5mm Rohr Für die gedruckte Grundplatte benötigt man: 4x Senkschrauben M4x20 4x kurze Gewindeeinsätze M4 Aus gewichtsgründe habe ich eine 24mm Siebdruckplatte 200x150mm genommen. Dazu benötigt man: 4x…
Cadillac serie 62 convertible 1959 Racing
The Yihua 959D is a pretty decent hot air station for the price. There were two annoyances: First is the unit is so light, it doesn't stay put on the workbench. I made some brackets that attach to the case using the case screws, then…
This is a custom design of the battery holder, for those like me that want to have a "softer" version in TPU.
No one else had made one of these so decided to give it a shot. I offset 0.15mm on each face to allow for clearance, fits snug and perfect. But please keep this in mind before printing. I printed in PLA so keep this in mind. If you need a…
Because the holder from timskloss collided with the frontcover of the Yihua, I redrawed the whole thing and did the following modifications: shifted the holder-plate up/to back some millimeters do avoid the collision with the front cover…
El WLtoys A959 es un auto RC a escala 1/18 muy popular por su buen rendimiento y bajo costo. Sin embargo, su sistema de dirección delantero de fábrica limita el ángulo de giro, lo que dificulta la práctica de drift controlado . Con el…
the 1959 willys jeep v4. v5 soon with better wheels and tailgate. extra headlights included
This is a wall mount solution for the Yihua 959D hand held part. The standalone version can directly bolted to any surface. while the other version fits on Multiboard panels.
Replacement central front suspension mount for the easily broken one on the WLtoys Wave Runner RC car. A very simplistic part that replaces the broken items pictured,not as pretty as the original but it prints very quickly and does the…
Aston Martin DB4 GT DB5 1959-1965 Racing
Needs a well calibrated printer. Try to fit at 0.2 layer height, it worked for me. Screw and unscrew it few times until the screwing movement is smooth enough. You don't need full height, 7mm should be enough, cut or just screw it until…
Classic American steel meets small-town pride! 🇺🇸 A bold 4-color tribute to the USA’s 250th Anniversary featuring the iconic 1959 Chevy Apache pickup, country barn scenery, and patriotic shield design. Made for clean face-down printing…
BMW 507 Roadster 1956-1959 Racing
Cadillac Miller Meteor 1959 ECTO-1 Ghostbusters Possibilité de modifier la taille et les couleurs le fantôme est en relief également une version plate du fantôme est en cours de réalisation et sera prochainement mise en ligne taille 136 x…
The Funko Pop Doc Brown #959 from Back To The Future is a little top heavy so I designed a stand to help him stay upright. The pole should press fit in to the base and not require any glue.
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
You should use supports for this model.
if you like my content please subscribe youtube.com/@3dmetehan Project: 959 paris dakar.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160.06mm in size You may print at higher layer…
map of German Democratic Republic 1959-1990
Upgrade your shop setup and keep dust to a minimum with this custom-designed dust port adapter, built specifically for the Craftsman 6” Belt Sander (Model #32039596) . Engineered with a dedicated keying notch inside the coupler, this…
Methyl 2-Bromo-4-nitrobenzoate (C8H6BrNO4, CAS 100959-22-6) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. At its…
Wall Art Silhouette model of the Ducati 959 Panigale Corsa Superbike. Adjustable size. I accept model suggestions.
This model is compatible with the lego system.
Because the holder from timskloss collided with the frontcover of the Yihua, I redrawed the whole thing and did the following modifications: shifted the holder-plate up/to back some millimeters do avoid the collision with the front cover…
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
These are specifically designed in order to be used with the widely available Tamiya 10115059 K-Parts lenses. Use M3 screws to assemble the front and the back parts.
I bought four rims for a Chevrolet Trailblazer, but they only came with one hubcap, so I copied it and spray-painted it to match the wheels, because in Europe, specifically in the Czech Republic, these hubcaps are hard to find and…
50's Art - Guitars - The Les Paul Sunburst - 1959 3D printable model.
simple support structure for the battery to allow the weight to be brought forward for better balance and more control as the front tires stay on the ground better. Honestly it handle WAY better this way. I used flexible filaments to…
This is a body plug for my 07 Lexus IS250. It is used on a variety of Toyota and Lexus vehicles.
Welcome to The Low Poly Auto Show! This is a Porsche 959. Print this model with NO SUPPORTS if your printers bridging is adequate. Details/fit may not print as intended if the print is scaled up/down. This model is designed to fit wheels…
