Counting matching models…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
Originally published here: Xiaomi Redmi Note 9 Pro / S case by tato_713 - Thingiverse This case is for the Xiaomi Redmi Note 9S and 9 Pro, but not for the Redmi Note 9 (it's a bit wider). Some of the models are designed for rigid…
This is a Ruger EC9S/LC9S Speed Loader, I was inspired by https://www.thingiverse.com/thing:259940 this is not a remix but a complete redesign. I added a thumb hole at the top so that it is far easier to use. I have added a video to show…
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE+/CORE ONE L+ add a like
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
options for printing at your discretion, plastic too this part was printing with 0.4 nozzle, low speed 0.4 layer (PLA)
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…
The cover is the same as on the original model. If you want to support the author of the original model, download it from there. This print protects the x-axis cable from being bend while working. To assemble you just need one of the…
A remix of @romankozak's adapter , this add-on part for the MK4-family filament guide provides a threaded attachment point for a PTFE tube fitting/coupling, allowing you to route filament coming from a dry box or other accessories. Two…
NieR:Automata HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.6 PLA+ eSun Gray Transmission Distance: 2.5 PLA Kingroon Skin Transmission…
The dust is wiped off the filament by a fabric inserted in the shell. The filter is composed of two parts that will need to be glued together. Print the thread with a 0.1mm layer. The shell can be printed with a 0.2mm layer. To assemble…
Overview This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this setup as a neural network trainer, render farm,…
I printed it from petg however pla should be fine. 10mm wood screws. I have the WD19S, however any dock other dell dock with the same dimensions should work. Print settings: 0.2mm Layer height 4 perimeters 15% infill 5 top & bottom layers…
I needed a way to make my MK4S utilize the 6 mm OD PTFE tube that comes with the Polymaker Filament Storage Box. I didn't want shell out extra money for hardware so I took some inspiration from sgmeesix's MK4 Filament Guide with Bowden…
Stylish cover for your X motor on MK4 and 3.9 Print without support and fix to the stock X-End-Motor bracket with a M3x25 screw. This is just a cosmetic addition and doesn't provide any performance enhancements.
Filament guides for these mounts: https://www.printables.com/cs/model/740680-mk4-mounts-for-universal-auto-rewind-spool-holder You can insert a 6mm PTFE tube, but you lose the possibility of putting the filament sideways if it is already…
1/9/2024 added NFC logo with -0.1mm tolerance, for easier insertion Version without NFC logo print PETG 0.2mm structural NFC LOGO print 0,1mm fast detail Dimensional fits the original model, can be glued with instant glue version with…
this package is for the FGC9SD (the rail will be added later) this “rail sizer” to make your AR15 shroud look better. will most likely not fit your model. but with some help of others there maybe some more designs added on a later date.…
Original model, WiFi logo cut across the entire wall.
This is a light diffuser for the RGB status LEDs of the Prusa Mk4. It is designed to fit over the LEDs to spread the light better. It needs therefor to be installed while assembly, because it fits in between the two halves of the display…
printed without mmu, glued to the original packaging with second glue, I pressed the wifi logo into the layer and it holds without glue Placed in parts in the model, then I turn and forcefully push
I made this mounting bracket for the Prusa MK3.9S/MK4S LCD for the Original Enclosure for easy removal. It replaces the mounting adapter parts xLCD-adapter_L (MK4S).stl and xLCD-adapter_R (MK4S).stl It allows me to slide the LCD off the…
I have shortened the depth of each of the holes in order to make it easier to remove the bits. Printed in TPU.
Simple IO Plate for a SuperMicro X9SRI-F Motherboard, in case you, like me, buy one used and it doesn't come with one. I believe this will also fit other SuperMicro motherboards, such as the X7SPA-H. You may want to print the upper…
Simple mount for my UNI-T UT139S multimeter to Parkside pegboard. It should fit on all other models from UT139 series. Easy print, no supports needed. PETG and 3 perimeters recommended. Attach with two M5x8 screws from behind.
Here we have another of the chimneys for 00/HO models, this one is a stone texture and the base section is 10mm x10mm and the top is about 16mm x 16mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print…
Modified version of the mount that allows free movement of the nextruder on the MK4/MK3.9. Compared to the original model, this one is slightly taller and the angle is also changed. The spools are placed higher and deeper. They do not…
removed from original model in prusa slicer, no design change . Print 0,2mm structural prusa slicer
Must print two to properly mount to surface, use screws to screw through mount and into the wall.
Customizable Redmi Note 9S Case A simple case model for Redmi Note 9S phone with TPU filament. You can customize the back of your phone case with your slicer (see images examples) with this parameters: Top Solid Layers: 0 Bottom Solid…
if you want other phone's CAD, put it down in the comments and I'll try my best to make them~
Functional replica of the Canik TP9SF/TP9SFx. not compatible with Mete, Elite, or Rival component kits. Print settings (full print settings in readme) pla+ is the bare minimum, pa6-cf or pa6-gf is ideal 99%-100% sparse infill density…
Spool spacer for many Lincoln wire feed welders. Category: Machine Tools
Wall mount for LG SC9S Soundbar. System preset : 0,20mm Strength Infill 25% Pattern : Grid You need: 4x M6x40 screw for wall mount 4x M8x40mm wall plug 2x M4x20mm from soundbar secure
If you are keen enough to get a non-ATX sized Supermicro X9SRG-F Mainboard (Single CPU LGA 2011) and build it into a 1U server chassis, it can be helpful to get a custom IO-Shield. Here is mine :) I used a Supermicro CSE-815 chassis. You…
Print Settings .25mm first layer. .2mm layer height. 5 walls, 30% infill. I'd recommend PETG minimum. No supports required. Files & BOM This is designed for a 35D monitor tube, however I’ve included the F3D files for if you need to modify…
The rollers' axles keep popping out, so after 5 revisions in tinkercad I finally have one that works. It fits really snug so hopefully it won't get too deformed from the heat of the dishwasher.…
If it is too loose, reduce the size of the model in the slicer by 1-2 percent or stick a foam sticker to the top edge like I did
Dell Docking Station WD19S Under desk or wall mount
Protective cap for socket HD16-9-1939S
This is a phone holder for Xiaomi Redmi Note 9S (and also Note 5) in a 2011 Hyundai i10. You can also use it as a drawer. You will also need 4x M3 bolts (optional: 4x M3 nuts, if you don't want to screw the bolts directly in the plastic).…
RZK-9S Razorback for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • rzk-9s-5.stl…
Box to two Icom F29sdr radio's. You will need six M3x30 screws to assemble it.
Modified R3 version of the PG cover, with an “ORIGINAL PRUSA MK3.9S” text via MMU printing. The included .3MF file has the MK3S+ MMU3 selected as printer, don’t forget to adapt this to your own printer model. I printed it with Prusament…
the subwoofer enclosure fits on a 220 x 220 x 250 build volume in 2 seperate build plates. i made it and printed one to accompany a self made 3d printed speaker set with a mini 2.1 amplifier.
MK2 ring light for my digital microscope. I have evolved the MK1 design into a better more robust ring light, the screws that are used to hold on the lens cover now serve as duel purpose to attach the ring light. The bottom section is…
Mit diesem Adapter kann die SB19ST-C000-4 Kalotte an das SB Audience H225 angeschlossen werden. Diese Kombination verwendet Oli Eser in seiner "Lillith". With this adapter, the SB19ST-C000-4 dome tweeter can be connected to the SB…
https://community.home-assistant.io/t/getting-live-electric-consumption-from-hydro-quebec-meters/274018/25?u=ptit-k
Resize to fit the Rollei 9S Cube lens.
This is a mod that adds an LED filament around your hot end. To go with it, I’ve included steps to hook it up to your GPIO board and trigger it with GCode. Printing Printed with PCCF ( Amazon ) to match the shroud. You might get away with…
Hi, I'm proud to present my version of RC Radio Transmiter (in my case RadioLink AT9S, but should also fit different models) screen holder. This model is obviously inspired by carbon+alminium available on chnese retailer shops, but it's…
This is a new version of my previous version. Cover added. I printed it in Transparant PETG
9v battery organizer in the form of a box with a lid for 9 batteries. Check out my other models. Organizer na baterie 9v w kształcie skrzynki z pokrywką. Pomieści 9 sztuk. Sprawdź inne moje modele.
The story I was long time user of 60° Heatbed Cable Cover from MrNeedlemouse, but with some prints (mainly around the edges of heatbed) the cables were crossing itself. I was using his part pretty prematurely, because my enclosure is big…
In winter our horn that is originally installed below the frame. Would get filled with water and die on us. The other reason we wanted it below the headlight is so that people would hear it better. There should already be enough wiring…
I searched for a Ruger EC9s Inert Magazine to help a buddy of mine with cleaning, but I could only find it on Thingiverse. From Thingiverse: Summary Ruger EC9s Inert Magazine. Ruger EC9s has a magazine disconnect feature, so in order to…
This part will help you mount the license plate to the rear foot peg mounting point. Print the license plate holder with high temperature material as this will live close to the exhuast. The push clips can be used for attaching the…
The difference is the diameter of the bolt part. Reduced it from 20mm to 19mm. I know its super easy to adjust in slicer, but might save someone from printing waste like I did for the first try. Used PETG 50% infill.
Print friendly print upside Use support for creases
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
9v battery organizer in the form of a box with a lid for 9 batteries. Check out my other models. Organizer na baterie 9v w kształcie skrzynki z pokrywką. Pomieści 9 sztuk. Sprawdź inne moje modele.
Box to two Icom F29sdr radio's. You will need six M3x30 screws to assemble it.
Same as the original model but modified to fit a 6mm diameter magnet.
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE add a like
Added cutout on the left side to align cover with cable channel on Nextruder body.
Internal Waistband (IWB) Holster for Ruger LC9 and LC9s Designed specifically for Ruger LC9 and LC9s pistols, this IWB holster offers secure and discreet carry. The fixed design ensures consistent placement and draw. It provides a snug…
Printed in PETG with Fuzzy Skin. Cover printed in Transparent PETG
Bicycle Stand Parts Tray for XLC/3MIN19SEC stand
Same as the original model but modified to fit a 6mm diameter magnet.
An xLCD reset button cover that easily swings out of the way to access button while preventing accidental actuation. Should work with the following printers: Prusa Core One, Core One +, MK4S, MK4, MK3.9S, MK3.9, MK3.5. Using the rotary…
Recommend printing with supports at a -30 degree angle so the slot is not an overhang during printing. This is a plus 0 plate will not extend your magazine just gives you the pinky groove without the price
Zidoo Z9X Z9S Stand I created this stand for my Z9X Secured it with magnets from an old hdd possible working with Z9S but I don't tested it Printed in Ender 3 pro with PETG 0,28mm layer height
Case to fit Dewalt DW099S laser tape measure and 2 spare AA batteries. Requires six M3 x 20mm socket head cap screws. Amazon link.
Often my meter is needed but it takes up valuable desk space. I have 2020 shelving to hold my test equipment. Using a higher shelve, I can put my meter out of the way. By putting a 30-degree angle I can tilt it down to get a better…
An universal cd-car phone holder. I redesigned the bit that goes into the CD-Player (for my Ford Focus Mk2) and the phone holder (for my Xiaomi Redmi Note 9S with its standard TPU Case). You can create your own phone cradle and attach…
