P
PrintablesDeltaX_F
Airbus A320 NEO
A really classic aircraft. After modeling the 737-800, I decided to model its rival, the A320 NEO. Both are to scale, same as my MD-11 and 747-100. Scale is 1:400
- Downloads
- 5,595
- Likes
- 225
- Rating
- 4.91
Search results: a32
Counting matching models…
P
PrintablesTonyG
TTGO LoRa32 v2.1.1.6 *and* T3S3 cases for Meshtastic
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
- Downloads
- 5,011
- Likes
- 359
- Rating
- 4.81
P
PrintablesCharlyA
Airbus A320 Engine
I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion. It just need supports in certain parts. The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so…
- Downloads
- 3,595
- Likes
- 1,876
- Rating
- 4.57
P
PrintablesMatt
Airbus A320 Plane STL (high quality)
This is a detailed model of the airbus a320-200. I have made this model in blender so it may lose some detail when you are actually printing it. I hope you find this model useful as there seem to be no other free realistic aircraft models…
- Downloads
- 2,238
- Likes
- 77
- Rating
- 4
P
PrintablesMartinAM
Airbus A320 - Home Cockpit Knobs
Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…
- Downloads
- 1,889
- Likes
- 71
- Rating
- 0
P
Printablesslabua
Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
- Downloads
- 1,759
- Likes
- 430
- Rating
- 4.78
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Korry style switch for 3mm panels
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
- Downloads
- 1,696
- Likes
- 53
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Switching Knob - V2
Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…
- Downloads
- 1,695
- Likes
- 103
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Lighting Knob - V2
Dimensionally accurate three-part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any…
- Downloads
- 1,578
- Likes
- 96
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 MCDU
Dimensionally accurate MCDU with models for all buttons and lenses. Designed in 3 layers, with top layer 3D printed and middle and bottom layers either 3D printed, or CNC machined from 3mm acrylic. Designed to be screwed or glued together…
- Downloads
- 1,443
- Likes
- 102
- Rating
- 0
P
Printablesjeepers01
TTGO Lora32 T3 Slimline Case
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
- Downloads
- 1,433
- Likes
- 81
- Rating
- 5
P
PrintablesFasa
Airbus (A320) labels for switch
New version of labels V2 https://www.printables.com/model/1364062-labels-for-korry-switch-a320-v2 Designed for A320 Korry switch https://www.printables.com/cs/model/103018-airbus-a320-korry-switch
- Downloads
- 1,235
- Likes
- 62
- Rating
- 5
P
Printablestato_713
Samsung Galaxy A32 5G & M32 5G a326 m326 case
Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…
- Downloads
- 1,103
- Likes
- 52
- Rating
- 4.8
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 EFIS Knob - V2
An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…
- Downloads
- 1,022
- Likes
- 68
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Flaps Mechanism
Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…
- Downloads
- 1,011
- Likes
- 104
- Rating
- 5
P
PrintablesKisssenschlacht
a320 Overheadpanel
a320 Overheadpanel (Not completed).
- Downloads
- 1,003
- Likes
- 51
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Panel
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
- Downloads
- 980
- Likes
- 47
- Rating
- 0
P
PrintablesCody
AIRBUS A320 Airplane Pop Flat Card
AIRBUS A320 Airplane Pop Flat Card
- Downloads
- 930
- Likes
- 149
- Rating
- 4
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Heading Knob
Dimensionally accurate design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it feels…
- Downloads
- 883
- Likes
- 56
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Radio Management Panel Frequency Selector Knobs
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
- Downloads
- 874
- Likes
- 54
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Transponder Panel
Three layer panel plus rotary switch mounting plate. Panels designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm…
- Downloads
- 854
- Likes
- 54
- Rating
- 5
P
Printablestato_713
Samsung Galaxy A32 4G a325 case
Originally published here: Samsung Galaxy A32 4G a325 case by tato_713 - Thingiverse This case is for the Samsung A32 4G (models started with a325), the 5G version is a bit bigger. For the 5G version (a326 models), see this . Some of the…
- Downloads
- 840
- Likes
- 22
- Rating
- 4.67
P
PrintablesShred
Heltec LoRa32 Minimal Case
I was looking for a minimal case for the Heltec LoRa 32 module. The cases I found either also offered room for a LiPo and a power switch, were not designed for the new solid LoRa antenna, or the module just did not fit properly. So I…
- Downloads
- 814
- Likes
- 69
- Rating
- 4.75
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 EFIS Korry style Switch
Korry style switch for the 7 buttons on A320 EFIS panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. Button Top Indicator and Bottom Legend are CNC machined from…
- Downloads
- 812
- Likes
- 31
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Speed Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 794
- Likes
- 44
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Parking Brake Handle
Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…
- Downloads
- 755
- Likes
- 47
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU ALT Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 745
- Likes
- 41
- Rating
- 5
P
PrintablesLama89CZ
Airbus A320 standalone tiller DIY
This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…
- Downloads
- 741
- Likes
- 44
- Rating
- 0
P
PrintablesOpen Source Country
NodeBrix Modular Case System for Heltec LoRa32 v3 and RAK19007 for use with Meshtastic
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
- Downloads
- 738
- Likes
- 136
- Rating
- 4.5
P
PrintablesFasa
Korry Switch A320 – V2
Korry Switch A320 – V2 This is the second version of my Korry switch model for the Airbus A320 , designed with better printability, improved accuracy, and easier assembly in mind. It’s ideal for home cockpit builders, flight sim…
- Downloads
- 721
- Likes
- 55
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 EFIS Baro Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 699
- Likes
- 50
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 EFIS Panels
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
- Downloads
- 678
- Likes
- 43
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Parking Brake Lift and Turn Mechanism
Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…
- Downloads
- 676
- Likes
- 63
- Rating
- 5
P
Printablesgeokscott
MySondy GO or Meshtastic Case TTGO / LILYGO LoRa32 V2.1_1.6 Board & 18650 Battery
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
- Downloads
- 674
- Likes
- 40
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Vertical Speed Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 662
- Likes
- 36
- Rating
- 0
P
PrintablesLimpidCoder
Airbus A320 Radio Panel (RMP)
ATTENTION. THIS IS AN OLD AND BAD VERSION!!!!!! YOU CAN FIND THE NEW V2 HERE: https://www.printables.com/model/1727793-airbus-a320-radio-managment-panel-rmp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Update 2025-08/05 -…
- Downloads
- 660
- Likes
- 60
- Rating
- 5
P
PrintablesSchoggimonschter
Switch heads for the A320 Light Panel
These are the three different switch heads of the A320 light panel and the black ring that goes at the bottom. Enjoy!
- Downloads
- 652
- Likes
- 48
- Rating
- 0
P
PrintablesDieHard
Airbus A320 slingshot glider (Only need 1 elastic band!)
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
- Downloads
- 649
- Likes
- 128
- Rating
- 3
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Push Pull mechanism
Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…
- Downloads
- 648
- Likes
- 68
- Rating
- 5
P
PrintablesRANPETEL
A320 / A330 131VU panel
A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…
- Downloads
- 623
- Likes
- 35
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Flaps Handle
Dimensionally accurate design for mounting on flaps lever shaft. Design needs support when printing, or splitting into two parts and then gluing. Printed in PLA with 100% infill. Variable layer height can be used on upper knob to reduce…
- Downloads
- 603
- Likes
- 37
- Rating
- 5
P
PrintablesSchoggimonschter
Airbus A320 Overhead Light Panel (25 VU)
These are the DFX and STL files from the DIY Airbus Light Panel. I used a laser to cut the Panels and a 2.5 mm plate. I also uploaded the LightBurn project to edit and customize it on Thingiverse (https://www.thingiverse.com/thing:6789303).
- Downloads
- 602
- Likes
- 26
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Transponder Selector Knob
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
- Downloads
- 595
- Likes
- 36
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Flaps Panels
Reasonably dimensionally accurate flaps panel, designed to fit Skalarki size Pedestal. Panel size 148.5mm x 100mm. Solves the problem, how to engrave position legend on curved surface. 3 layer panel designed to be routed from 3mm cast…
- Downloads
- 576
- Likes
- 31
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Korry style switch for Skalarki Overhead panels
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
- Downloads
- 571
- Likes
- 23
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Pedestal Foot Rests
I suspect they are rubber in the real aeroplane, but you're probably not going to actually put your feet on them. Printed in matte grey PLA. I used 50% infill to give them a feeling of solidity, but could be as low as 10% to save…
- Downloads
- 569
- Likes
- 36
- Rating
- 4
P
PrintablesFlykarli
Ext. Gear Airbus A320
This is my Gear Ext. Projekt for my Airbus A320 Cockpit Category: 3D Printer Parts
- Downloads
- 541
- Likes
- 30
- Rating
- 5
P
PrintablesFasa
Labels for Korry Switch A320 - V2
🔧 Important: To achieve crisp, readable lettering, a 0.25 mm nozzle is required . Larger nozzles (like 0.4 mm) will not render the fine details of the raised text properly. 🧩 Two printing methods: Requires 0.25 mm nozzle for best results.…
- Downloads
- 541
- Likes
- 39
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Rudder Trim Knob - V2
Three part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour and painted Light…
- Downloads
- 533
- Likes
- 39
- Rating
- 0
P
PrintablesCJPrints
TTGO Lora32 T3 18650 case
Remix to allow an 18650 battery in a suitable holder to be accommodated in the back of the case
- Downloads
- 517
- Likes
- 28
- Rating
- 5
P
PrintablesIllia Leoshko
Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/Vibro/GPS/Environment sensor/Belt clip/M5Stack CardKB Keyboard-ready
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
- Downloads
- 511
- Likes
- 119
- Rating
- 4.67
P
PrintablesTeo_211
Airbus A321 Wall Art
Airbus A321 Wall Art silhouette model. Adjustable size. I accept model suggestions.
- Downloads
- 491
- Likes
- 79
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Audio Control Panel Reception Knob
Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…
- Downloads
- 487
- Likes
- 40
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 ECAM Control Panel Korry Style switch
Korry style switch used on ECAM Control Panel in Pedestal. Designed to look similar to a real switch, with focus on a smooth click movement and even illumination, with no light bleed between top and bottom indicators. Tolerance between…
- Downloads
- 483
- Likes
- 26
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Transponder Mode Knob
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
- Downloads
- 479
- Likes
- 28
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Cockpit Microphone
Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…
- Downloads
- 465
- Likes
- 34
- Rating
- 0
P
PrintablesEmiel
TTGO lora32 T3 v1.6.1
I was unable to find a CAD model for this specific TTGO module so I made my own. The dimensions and the placements of the components should be fairly accurate but there could be a slight difference. If you've got any questions or…
- Downloads
- 449
- Likes
- 25
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Switching Panel
Three layer panel and rotary switch holder. Panels designed to be CNC or laser cut from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear.…
- Downloads
- 445
- Likes
- 24
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Korry style Switch
Korry style switch for the Autopilot and Auto Throttle buttons on A320 FCU panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. An alternative Housing design in two…
- Downloads
- 444
- Likes
- 21
- Rating
- 0
P
Printablesmurxmax
A320 Gravity Gear Extension Panel - V1
This is my model of the Airbus A320 Gravity Gear Extension Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS! The goal is to make an accurate replica, so if you have any specific data…
- Downloads
- 439
- Likes
- 14
- Rating
- 0
P
PrintablesTube
Gigabyte GA-A320M-S2H IO shield
Print model IO shield for Gigabyte GA-B320M-S2H
- Downloads
- 419
- Likes
- 8
- Rating
- 4
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Rudder Pedals
My latest updated version with improvements can be downloaded from MakerWorld: https://makerworld.com/en/models/1714786-a320-rudder-pedals#profileId-1819932 Reasonably dimensionally accurate Airbus 320 style Rudder Pedals that clamp onto…
- Downloads
- 413
- Likes
- 38
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Sidestick Mount - Captain's side
A strong and stable mount for a Thrustmaster HOTAS magnetic base combined with FlightSimProjects Airbus sidestick and gaiter. Designed to be mounted in a side cabinet with a 12mm MDF or similar top panel. Hole size required is 168mm x…
- Downloads
- 381
- Likes
- 31
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Rudder Trim Mechanism - V2
Mechanism to create realistic 30 degree sprung movement for rudder trim knob. Works with pair of microswitches. Designed to work with my Rudder Trim Knob: Airbus A320 Rudder Trim Knob by MANTOGA | Download free STL model | Printables.com…
- Downloads
- 377
- Likes
- 28
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
A320 MIP Lighting Panel ND Brightness Knob
Reasonably dimensionally accurate concentric brightness knobs. To be honest, this design pushes the limits for a 0.4mm nozzle and would ideally be printed with a 0.2mm, but as the pictues show you can just about get away with 0.4mm. The…
- Downloads
- 373
- Likes
- 23
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Cockpit Microphone Holder - Captain's side
Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…
- Downloads
- 367
- Likes
- 23
- Rating
- 0
P
PrintablesNexGenSim
A320 MIP Frame Captain Side Panel
This is a NexGenSim 3D printable A320 MIP Frame Captain Side Panel. It is provided free of charge for you to 3D print it yourself. It is a highly accurate representation of the real A320 ceo panel, scale 1:1
- Downloads
- 360
- Likes
- 12
- Rating
- 0
P
PrintablesRANPETEL
A320 / A330 ATC MSG panel
A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…
- Downloads
- 353
- Likes
- 19
- Rating
- 0
P
PrintablesLimpidCoder
A320 Metal Extrusion Pedestal
NOTE: This is not a build instruction or ready made files. This is simply some tips and helpful resources if you plan on buliding a pedestal. You will enocunter problems and you will have to solve them yourself, definitvely not a beginner…
- Downloads
- 349
- Likes
- 18
- Rating
- 0
P
PrintablesLimpidCoder
![Airbus A320 FCU Panel [Multi-Colored Version]](https://media.printables.com/media/prints/593f00c0-3341-493d-8912-13753b25a9c7/images/10386328_3156a600-e933-49bc-86ba-a0dd67c6a0ba_1f09afc6-4763-4888-8223-adef2815539a/pxl_20250716_122757329.jpg)
Airbus A320 FCU Panel [Multi-Colored Version]
Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it + some pictures. Note : I have included the f3d file I used to add the text but since it got corrupted at the end and I had to recover an older version…
- Downloads
- 343
- Likes
- 40
- Rating
- 0
P
PrintablesFasa
A320 Overhead Panel - Lights, APU & More
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
- Downloads
- 341
- Likes
- 31
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Speed Brake Handle
Dimensionally accurate knob for mounting on Speed Brake lever shaft. Design can be printed vertically without support, or split into two parts and then glued. Printed in PLA with 100% infill. Variable layer height can be used to reduce…
- Downloads
- 312
- Likes
- 25
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Rotary Switch Mount - V2
Mount and shaft extender for rotary switch, now with PCB for LEDs. Base printed in Black PLA. Light Pipe Upper and Shaft Extender in transparent PETG. All printed with 100% infill for strength. Base and Upper are glued together and then…
- Downloads
- 310
- Likes
- 21
- Rating
- 0
P
PrintablesLimpidCoder
![Airbus A320 Radio Managment Panel [RMP]](https://media.printables.com/media/prints/a117664b-7482-4625-be91-3d46168b3742/images/13292151_2c46eb8c-ab43-4f15-940e-1a94dd370236_f265bffd-c527-497f-ab0c-8039644b6915/rmp_guide_1-1.png)
Airbus A320 Radio Managment Panel [RMP]
Update 24/09-2026: Updated resistor link and quarter watt sign. Update 15/09-2026: Added a wiring guide and slight update to model description. Update 28/08-2026: Updated description, added white LED switch and plastic washer, all kits…
- Downloads
- 298
- Likes
- 31
- Rating
- 0
P
PrintablesNexGenSim
A320 MIP Frame EICAS Panel
This is a NexGenSim 3D printable A320 MIP Frame EICAS panel. It is provided free of charge for you to 3D print it yourself. It is a highly accurate representation of the real A320 ceo panel, scale 1:1.
- Downloads
- 296
- Likes
- 13
- Rating
- 0
P
PrintablesPilot4XP
A320 LDG ELEV Knob
This is a 3D model of an A320 LDG ELEV Knob for a Homecockpit.
- Downloads
- 289
- Likes
- 9
- Rating
- 5
P
Printablesmurxmax
A320 Transponder Panel
This is my model of the Airbus A320 Transponder Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS!
- Downloads
- 286
- Likes
- 23
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Sidestick Vent
Vent Cover and 120mm fan mounting plate for front face of Airbus A320 Sidestick Cabinet. Designed for MDF Sidestick Cabinet. Vent cover is glued in place. Fan mounting plate is screwed from inside. Print in matte PLA, any infill %. For…
- Downloads
- 274
- Likes
- 18
- Rating
- 0
P
PrintablesBazzar701
Tiny Airbus A320neo - Mini Planes Series
Airbus A320neo, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Planes collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
- Downloads
- 267
- Likes
- 52
- Rating
- 5
P
Printablesellocaso46
A320 EFIS
A320 EFIS for flight simulator. Doesn't include buttons for custom functionality.
- Downloads
- 264
- Likes
- 9
- Rating
- 0
P
PrintablesLimpidCoder
Airbus A320 Printer Panel
Update 07/04-2026: Reprinted in new filament, panchroma muted blue (previously polyterra army blue). Designed for standard 1030 extrusions, feel free to remix if you want a different mounting solution or use a different printer. The…
- Downloads
- 248
- Likes
- 20
- Rating
- 0
P
Printablesfierox 88
A320 Compact Pedestal
Most A320 pedestals are pretty big and don't fit a desk setup so i made a smaller version. Made for the Winctrl throttle and panels but it might also help supporting the Thrustmaster TCA Quadrant. Note: a longer sata cable is required for…
- Downloads
- 242
- Likes
- 22
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Armrest Ramp - Captain's side
Armrest Ramp for rear of Sidestick Cabinet. Designed for cabinet with 5 degree slope and 10mm radius on top panel. Dimensionally accurate with real aircraft. Print in matte or gloss black PLA, 50% infill for solidity and 0.15 layer height.
- Downloads
- 242
- Likes
- 15
- Rating
- 0
P
PrintablesWade Edwards
TTGO Lora32 T3 Slimline Case with Battery
I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…
- Downloads
- 242
- Likes
- 10
- Rating
- 4.5
P
Printablesjgd11
Airbus A320 Keychain
Airbus A320 keychain (Two colour print) stl prepared for a two colour print.
- Downloads
- 238
- Likes
- 29
- Rating
- 5
P
PrintablesLimpidCoder
Airbus A320 Glareshield Dimmer Knobs V2
A 1:1 replica of the real life A320 Dimmer Knob that sit underneath the Glareshield. Files include multiple objects that are different colors. Print with black and white PLA. Designed to mount on a standard 6mm potentiometer shaft and…
- Downloads
- 233
- Likes
- 13
- Rating
- 0
P
PrintablesRambo
Lilygo TTGO LoRa32 case
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
- Downloads
- 229
- Likes
- 14
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Sidestick Cabinet Rear Light
Designed for rear of Sidestick Cabinet with 5 degree slope. Print body in matte black PLA, 50% infill for solidity Print lens in translucent PETG. 50% infill produces good transmission and diffusion, but can be varied to suit material and…
- Downloads
- 228
- Likes
- 19
- Rating
- 0
P
PrintablesTeo_211
Airbus A320neo Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 215
- Likes
- 27
- Rating
- 5
P
PrintablesAjay Kamath
Airbus A320/A330/A350/A380 Landing Gear Lever Knob
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
- Downloads
- 208
- Likes
- 10
- Rating
- 0
P
PrintablesMajaPrints
WizzAir Airbus A320
Use M3x20 bolts for the wheels. You can add the logos with a marker. For connecting the midle pink fuselages use a bamboo skewer. You can make the fuselage hollow. Note that the engines are slightly asymetrical. You need suppoort for the…
- Downloads
- 208
- Likes
- 30
- Rating
- 4
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 Sidestick Cabinet Ash Tray Insert
Small rectangular recess / holder (I'm sure it isn't used as an ash tray these days!). Design is in two parts to enable printing without supports. Two parts have locating lugs and can be assembled with CA glue Best printed in matte black…
- Downloads
- 207
- Likes
- 9
- Rating
- 0
P
PrintablesBGDglider
LilyGo TTGO LoRa32 Case
This is a fully 3D printable enclosure for the LilyGo TTGO LoRa32 board used in Meshtastic nodes. The enclosure provides internal space for a battery and supports the use of the board’s native antenna connector. The slide switch and reset…
- Downloads
- 202
- Likes
- 17
- Rating
- 5
P
PrintablesTheno
Airbus A320 Flaps Panel cover
This a the Airbus A320 Flaps panel plate. I designed it using some pictures taken in a real cockpit. Category: DIY
- Downloads
- 193
- Likes
- 9
- Rating
- 0
P
PrintablesMit
A320 landing lever for simulation
Bring realism to your flight simulator with this A320 landing gear lever replica. Built using just two limit switches, a few screws, a spring, and an Arduino (Mega, Mega Pro Mini, Pro Micro, Uno, or Nano), it’s simple and effective. Fully…
- Downloads
- 190
- Likes
- 13
- Rating
- 5
P
PrintablesLimpidCoder
![Airbus A320 EFIS Panel [Multi-Colored Version]](https://media.printables.com/media/prints/96237181-b9df-4505-8aa7-a3d984d6d6bc/images/9796180_292e5a01-926a-4ef7-9d51-bd448f8f64c6_edae177b-df5f-4b71-8ef3-91eb80313b90/pxl_20250518_121701052.jpg)
Airbus A320 EFIS Panel [Multi-Colored Version]
Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it This is still a work in progress! A modified Version of Mark Aytons A320 EFIS Panels. The front Panel is printed with a 0.2 mm nozzle on my bambulab x1c…
- Downloads
- 186
- Likes
- 16
- Rating
- 0