Counting matching models…
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Case for the raspberry 5 with the Noctua 40x20 5v fan. To assemble this project, the following are required: Raspberry Pi 5 Noctua NF A4x20 5V Fan (can be PWM version) with 4 screws 4 x M3 25mm screws (to join the top and bottom) 2 x M3…
Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…
Fan cover A4x10 / A4x20 (Noctua) Cover for A4x10 and A4x20 fans. Just put it over and screw it with the fan. With and without cable routing available. The width has a little bit play, the height is adjusted to my printer, if needed…
This mount allows you to mount the thicker Noctua NF-A4x20 fan to your Ender 3 V2 Neo. Should work with any 40x40x20mm fan though. This model is a slight modification of Ihor Pomaranskyy's Noctua design.
This is a Hot end cover to replace the stock Ender 3 or 3 pro cover. Should fit cr10 etc. It is extended in order to fit a Noctua NF-A4x20 FLX 12v fan. It's dramatically quieter and still has great air flow. Uses all of the stock…
Noctua NF-A4x20 Fan Reference Model Also included is a .skp
Now compatible with Pi5. Things worthy of note: Pi5 has an integrated Powerbutton. The placement on the PCB is not compatible with the idea of this case. Solutions: Round hole on the side of the case you can reach the button with a small…
I wanted to replace the already pretty quiet but still server fans of my Supermicro SYS-E300-9A with some more quieter Noctua NF-A4x20 PWM fans. Unfortunately, the original screws and the screws that come with the fans both don't fit to…
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
MK3S Stepper Cooler + noctua 20mm This one is not that loose, what I found online was all loose like ... "bíró seggében a lóf@sz" :-) No glue or screws nor double side tape needed to fix this one just clip it on and use it. Stl & Fusion…
I ordered a 20mm deep nocua so I needed a bigger fan shroud I made it from another model but I dont remember where did i found this original model. https://noctua.at/en/nf-a4x20-flx
I was looking for a Pi5 case that used the Noctua A4 5v fan and came across the original as a Pi4 model. I've modified as in the description as I wanted to be able to use for multiple models. Objects will need to be reoriented correctly…
This hotend fan mount fits a Noctua A4 fan or any other fan that's mounting hole distance is 32mm. Ruthex M3 heat insert are needed. Holes for these are 4mm in diameter and ~5.7mm deep. This is but a rough draft btw. So please bear in…
I'm excited to share my remix of the popular Raspberry Pi 4B case designed for the Noctua NF-A4x20 5V fan, originally created by Pillar. This remix adapts the design to perfectly fit the Raspberry Pi 3 Model B and B+, while retaining all…
Based on the excellent case by Pillar I changed it to suit my SSK External 128GB Portable SSD, USB 3.1 Gen2 (6Gbit/s) SSD External Disk. It needed to be just 1mm taller. I ordered a short USB to usb-C cable with angled connector because…
Looking for fan cover for Scott Yu-jan's Satsana remix ( https://www.thingiverse.com/thing:4794720 ). I liked "Hex Pattern for Fan Duct" by Soopdragons ( https://www.thingiverse.com/thing:4826789 ). I found "Satsana Fan Duct Remix for…
I wanted something to sit between my shroud and fan grill/cover on my Monoprice Select mini V2. The Noctua colouring just isn't my cup of tea so it had to be hidden. It's essentially a hollow square with a notch for the fan wires, it's as…
This remix is based on the original Raspberry Pi 4B Case with Noctua NF-A4x20 5V Fan . The primary goal of this remix is to add a mounting system compatible with the IKEA SKÅDIS pegboard, making it easy to attach or detach the case from…
Remix of an existing naked fan mount with a couple tweaks to improve fit. Press fit to put the fan into the fan and press fit to add the mount to the hot end, no tools required.
