1 / 3
Raspberry Pi 5 Case with Noctua NF-A4x20 5V Fan — image 1
1 / 3

Raspberry Pi 5 Case with Noctua NF-A4x20 5V Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made original case compatible with Pi5. Many thanks to @Pillar_113742

Rating
5 / 5
Likes
13
Downloads
99
Makes
0
Views
1,147
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Now compatible with Pi5.

Things worthy of note:

  • Pi5 has an integrated Powerbutton. The placement on the PCB is not compatible with the idea of this case. 

  • Solutions:

    • Round hole on the side of the case

    • you can reach the button with a small screwdriver through the hole

    • Or connect a round pushbutton to J2 and screw into the hole

      • as seen on my photos

      • https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#power-button

    • or slide the insert out and use the button (good enough if always on anyway)

Ideas for the future:

  • check if a NVME hat can fit on top (official fan not necessary due to fan in case)

    • This works. I have now running SATA SSD + NVME Hat

  • check if PCIE <-> SATA adapter exists for Pi5 in the future

    • this could allow to use SATA SSD while getting rid of USB cable

    • I would suggest just to go with an NVME Hat

Tags