Raspberry Pi 5 Case with Noctua NF-A4x20 5V Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made original case compatible with Pi5. Many thanks to @Pillar_113742
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Now compatible with Pi5.
Things worthy of note:
Pi5 has an integrated Powerbutton. The placement on the PCB is not compatible with the idea of this case.
Solutions:
Round hole on the side of the case
you can reach the button with a small screwdriver through the hole
Or connect a round pushbutton to J2 and screw into the hole
as seen on my photos
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#power-button
or slide the insert out and use the button (good enough if always on anyway)
Ideas for the future:
check if a NVME hat can fit on top (official fan not necessary due to fan in case)
This works. I have now running SATA SSD + NVME Hat
check if PCIE <-> SATA adapter exists for Pi5 in the future
this could allow to use SATA SSD while getting rid of USB cable
I would suggest just to go with an NVME Hat