Counting matching models…
This is a 3D model Anker 4-Port Ultra Slim USB 3.0 Data Hub model A7516. I designed it in order to make a mount for it, but I thought someone might have use for it.
Vesa75 mount for iPad Pro 11" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Adnorth PLA Glitz Notes: Print standing to remove the need for supports. Use M3 screws with…
the photos show a model with no edge to prevent papper roll from sliding off holder, the photos are of the first model, not used anymore. new model has a small “flap”
A Wall mount designed for the EA7500. I've added the dimensions in case other routers are compatible with the designed mount. Designed for use with 50mm wide dual side tape on the backside. Category: Gadgets
Mounting Frame for e-Cigarette Mods using DNA75C Board by Evolv LLC.
Needed to mount a display on slat wall on control a CNC router. Used existing VESA75 quick mount to to display https://www.printables.com/model/745300-vesa-10075-quick-release to the adapter Used M4 cap head bolt + nut mount to VESA quick…
A simple VESA 75x75mm mounting plate with a 30x30mm bolt pattern and alignment indent for the “holder 4 nut - d30 M5.stl” holder of the Multifunction Arm Mounting System. This creates a static mount for things like monitors. Made for use…
the mobula 7 use a very cheap frame and broke in 10min of flight time. After 30min, it was broken at 4 places. I then took a betafpv 75 frame but then I could not install tow lipo in it. I design this to hold two tinyhwoop style…
Got a small desk where your monitor takes up half the space? Mount it to the wall! This is a removable Monitor mount for your wall. There's no adjustment (yet) so you'll have to measure it right! I wanted the design to be removable so I…
This OrangePi One housing is inspired by the RaspberryPi housing which I already printed a couple of times for my Pi's. Lately I tested the boards from OrangePi, was really happy with them and decided to adapt the housing for those. I…
Storage and transportation box for iflight A75 drone No raft, No support needed Layer: 0.2mm Infill 100% Good protection, compact, flexible and stable Material: PETG Printer: Prusa MK3S+ Have fun!
I was asked to help redesign the Z02 camera mount that BetaFPV had for their camera to fit the EOS1/2 cameras, many iterations with lots of collaboration we have finally settled on a mount that fits under the canopy, holds the camera, is…
To convert a Beta75 Pro frame to work with the Mobula7 I found the best way is to trim the existing battery holder off and then use one of the ones I designed made out of TPU. I had designed a battery holder that just slid into the…
This is a 2s to 1s adapter so that you can use the Beta75 pro frame with the Mobula7. Slide the adapter in place, it takes a little wiggling and will snap into place, then slide your batteries in and your done. It weighs 3 grams printed…
Cutout some of the case opening for the SD card access to make it easier to get to for the VESA75 mount. Sneaks orginal work is one of the best things I've printed, it goes together as it should, even when the bottom or top has adhesion…
Double antenna holder for Beta75X tiny whoop. Add pipe cutted from Q-Tip to protect the antenna. No need to glue it on frame, it can be insered in the frame like the LED extention board.
prints standing up with wide side up, support on baseplate, or support set by angle, and paint on support
Canope Print up side down, no support needed I had the best results in PETG Antenna mount Print in TPU Wall mount Print in PETG or PLA Everything gets better with coffee! https://ko-fi.com/pixbalance
Support de tablette pour Panasonic CF-H2 destiné a être installé sur le support de boitier VESA75 d'origine dans une cabine de New Holland ou Case IH. Des vis M3 x 16mm sont utilisées pour fixer la tablette sur le support imprimé.…
Remix of the Backplate from https://www.printables.com/model/68643-vesa-100-quick-release to make it VESA 75 compatible
TPU with supports Traditional 30 degree for outdoor 22 degree for indoor Category: DIY
I bought the KSA7575 On-Stage microphone mount without realizing it was too small to fit the tubing on the Liquid Stands Z style keyboard stand. Created this small adapter for a secure fit. I printed with 100% infill, but this was…
This mount is designed to hold a 15.6 inch monitor underneath a wallboard on my desk. Hardware needed: 4x M3 Washer 4x M3x8mm Hex Screw 6x M3x10mm Hex Screw 6x M3 Heat insert Maybe 1x Strip of double-sided tape to stick the monitor to the…
I needed a VESA75 monitor bracket/mount I could quickly attach to any magnetic surface and remove just as easily. This bracket can hold up to 3x 36mm x 7mm magnets (link to amazon below) depending on the weight of your monitor. Be sure to…
Remix of the Backplate from https://www.printables.com/model/68643-vesa-100-quick-release to make it VESA 75 compatible
Overview A very situation VESA mount for the Anker 7515 USB hub. I needed to hide this behind my monitor and affixed it to the back of the monitor mount. It mounts to the M8 holes 100mm apart. The two main components come together using…
