31 models
If u wan't print this take patience. All print's (except wheel) hyper pla on k1 max. Read extra comment on model to print, one or more models need scale in slicer. Used components: ~1Kg Hyper Pla M3 screws (16mm or 20mm) x14 M2 screws…
I love my new TV. Unfortunately, my kids love it too. The nice remote that comes with it, has been played with and dropped on the floor already a few too many times. So I decided to design and print a case for it. This is a flexible case…
This is a set of files for improving the steering angle of the Wltoys a979 (also for a959 and a969). This model's steering system articulation is way too low and the wheels may only turn 10-15 degrees most which causes the turning radius…
This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. Which donor mice does this mod work with? I have tested the Corsair Sabre Pro V2 , and that is the mouse I am…
Wltoys A959 series have 7mm hex which is not very common. There are various wheel alternatives with 12mm hex. This part enables the use of 12mm hex wheels with A959 series.
A Caddx Peanut mount for Beta95Xv3. It is a strait replacement for the original SMO4K mount. If You're planning to carry a camera - you are since your searching for a mount for it - I would strongly advise to squish with screws that…
LED Holder for WLToys, DAZHONG, Vortex type A959 RC Car. Fits lights here https://www.amazon.com/gp/product/B013SSO70Y/ref=oh\_aui\_detailpage\_o01\_s02?ie=UTF8&psc=1 Probably works with other lights. Print instructions Category: R/C…
This is my 4th model in Fusion 360, my 2nd enclosure and my first publicly available model. I made a handful of iterations on the primary case and a couple on the lid. Took me about 5 hours with the iterating and testing my design. Its a…
wheels for wltoys a959 on snow or sand. 7mm hex (stock).
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings. I whipped these up and they work great. Note they may not fit the a9x9b series.…
Print the two parts and insert the TCA9548A multiplexer inside them then pull the source wires going to your controller through the small slot on the back side of the adapter. Use the larger front opening of the adapter to connect the…
I developed this Naked GoPro Mount/Case/Holder based on the idea of Tommy Tibajia aka. Ummagawd. I found his design inspirational, but I thought I could improve it in many aspects. At the time I started designing I only had a GoPro Hero 5…
A9x9-20 Servo Arm spare part for Wltoys Print Settings Printer: forkLIFT MK1 Rafts: No Supports: No Resolution: 0.3 Infill: 100% Filament: 3DFila PETG Golden Notes: Printed with ABS outlasted the original part and should be even better…
to make the suspension stiffer - 6mm Category: R/C Vehicles
Since BetaFPV recycles their V1 camera mount as a bottom plate for the V2, I decided to build a better bottom plate. I didn't like that the quadrotor can't be placed horizontally at level and that the USB port is just not accessible, no…
Fits nicely, with two hidden screws for mounting
I ordered the Beta95X frame, hood, motors and FC stack from BetaFPV because I already had a Cadxx Vista and would like to build the Beta95X. Unfortunately the hood didn't come with suitable screws, I couldn't wait for screws to ship, so I…
This is a very specific one: A mount for the RushFPV Tank Ultimate Mini with the default antenna for the BetaFPV Beta95X V2. Notes The two cross beams tie the thing together but also fixate the microphone if you use one. The little flap…
Better lens cover for Insta360 Go to mount on Beta95X V3 Frame. This is a remix of https://www.thingiverse.com/thing:4496361 (Tks Thingiverse for a broken Remix search :/ ) Print Settings Printer: Delta Rafts: No Supports: Yes Resolution:…
Use this if you need to connect multiple I2C devices with the same address to one bus. Uses a plain PCA9548A module mounted at the bottom of the PCB. Contact me if you are interested in the PCB. Category: Electronics
El WLtoys A959 es un auto RC a escala 1/18 muy popular por su buen rendimiento y bajo costo. Sin embargo, su sistema de dirección delantero de fábrica limita el ángulo de giro, lo que dificulta la práctica de drift controlado . Con el…
can get whole build under 11g with 2g battery and removed encoder, scroll and scroll click I printed the clicks upright with generated supports, very fragile so be careful when taking the support off
I designed this antenna holder for my naked GoPro BetaFPV Beta95 CineWhoop. Simple, flexible, easy to print. I attached the modifiable f3d archive, so it is easy to edit with Fusion 360. Check out my unbelievably awesome naked GoPro mount…
I have a RunCam Nano 3 that I need to use on my Beta85X Pusher, so I decided to use the LED mounts on the back. It can fit any frame that have Led Mounts like Trashcan and Beta95X. The strap is to pull it over the camera and lock on the…
The Beta 95X from BetaFpv is a nice little whoop with DJI's digital video system using Caddx Vista. However, BetaFpv failed both with delivering an acceptable canopy and providing jello-free video. A better canopy design is already…
I removed the carbon fiber frame of the beta95 for a light weight cinematic drone. I had to design a way to hold the batterie. Here it is. Print in TPU or PLA. Category: R/C Vehicles
Remove the antivibration gummies. Reccomend using TPU to print.
Made originally for my flight case, I also included the blank top plate to make your own mounting tabs!
This is a 1x2x4 Gridfinity bin that can store up to 10 TCA9548A I2C multiplexer switch modules. See the photos for the specific board this design is based on. I'm not 100% sure if the Adafruit version of this module will fit, but I…
Use this if you need to connect multiple I2C devices with the same address to one bus. Uses a plain PCA9548A module mounted at the bottom of the PCB. Contact me if you are interested in the PCB. Category: Electronics
