44 models
Remix of the Sega Genesis / Megadrive cartridge trays, fitting 10 positions instead of 6. Note: Some cartridges may fit snugly due to variances in original manufacturing. Don't force your cartridge into a slot.
Print with the flat sides down, layer heights are not critical, but the smaller the more refined the curves will be. Infill is also not critical, anything over 5% is fine. You can install it without any screws, but for the best results…
This print is a replacement for the side expansion port of a Sega megadrive model 1. Print instructions Printed in 0.2mm layer height. Infill 20%. Used brim for better adherence to the print bed. Also used supports from the print bed.
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
as usual with my button replica's, you'll have to print them in Resin, simply because they're so small and fragile.
a retro logo i made, couldnt find one i wanted so i had a go at doing it myself.
After remixing the SNES display stand from @jordanhoff I wanted a similar styled stand for my SEGA Genesis games so… here we are. Trying to showcase the artwork has it's challenges making the stand be much taller than the SNES version and…
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
This model is for the classic 3-Button pad, with approx. 1.20 m long cable. The cable makes two turns and then the connector fits gracefully in the allocated slot.
Simple backplate replacement, allowing for either a mini-din or megadrive/genesis 2 socket to be installed. I used this one, because it has a nice breakout board with it (did have to file to top flush a little bit);…
This is the movement block for an old Ikea loveseat. The replacement part was not commercially available by itself at an acceptable price point. The broken part was shattered into multiple pieces so I had to use the rapid reiterative…
Compatibility This shell is intended to work with this PCB from AliExpress (non-affiliated). Printing You can print all of these with the largest flat surface faced down on the print bed. Depending on how well tuned your Printer is, you…
Lithophane / Vitrail dédié à la jaquette de Sonic the Hedgedog sur Sega Megadrive! Faites vous plaisir ! This is a lithophane from the cover of Sonic the Hedgedog on Sega Megadrive, that could be used as a stained glass window. Enjoy !…
The next in a mini-series for me, I have a friend with a large game/retro games collection, he wanted something to stand out on his drawers, I have put together a few sketches of controllers that will be the knobs. Then along comes this…
Sega had completely given up on the 32x by the time that they released the Model 3 of the Sega Genesis. Sega even went as far as to remove support for the 32x at the hardware level on the device. This printed adapter is made to mate the…
Simple hanger for retro console gamepads. Front part holds the gamepad, back part the cable Works with most gamepads. Tested with PS1 (with and without analogue sticks), Sega Saturn, Megadrive/Genesis & Master System, Nintendo NES & SNES,…
Case for the OqtaDrive Standalone PCB which you can find on PCBWay Sinclair ZX Spectrum & QL OqtaDrive Standalone v1.1 PCB - Share Project - PCBWay Also added a 2nd case bottom with a single LED hole for the v1.2b PCB. *Added a v1.2 of…
Hello, Sharing my project of simple games holder for 10 cartridges for Sega Megadrive (Genesis) and MasterSystem. Dimensions: 192x114x21mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights…
Stackable Gridfinity holder for the SEGA Megadrive / Genesis console cartridges. Uses a 3x2 grid with 4 height units.
Sega Genesis Scart Connector Printed with an Huxley RepRap Pro Instructions Print, clip, add 2 screws --> Play Category: Toys & Games
USB-C power adapter for Sega Genesis model 2. v1 - This is intended to replace the existing power supply input and use the existing hole in the case. There is a post that needs to be clipped for the top cover to fit. v2 - if you want to…
Vertical Stand for the Sega Megadrive which should be compatible with the Sega Genesis also. Note, this stand is for the OG version and is not compatible with the Sega Megadrive II or Genesis II OnShape Model…
A remix of Botvinnik's excellent 2-player Daemonbite MegaDrive case that simply allows assembly using 4x M2x8mm self-tapping screws. Additionally, the Arduino is held in place when the two halves are closed. Updated 21/4/2021 : Added…
The game Zero Tolerance for the Sega Genesis/Megadrive is interesting as it has a system link mode that allows you to play across two systems. The made this work with a link cable that plugs into each system's player two controller ports.…
Vertical Stand for the Sega Megadrive II which should be compatible with the Sega Genesis II also. Note, this stand is not compatible with the original Megadrive / Genesis OnShape Model…
Case for the Daemonbite Retro Controller USB Project by MickGyver ( https://github.com/MickGyver/DaemonBite-Retro-Controllers-USB ). The aim of this design is being able to create a plug&play adapter (compatible with MiSTer FPGA,…
OqtaDrive uPCB v1.2 Case. Case secured with 4x No.4 (2.9mm) x 1/2 inch (13mm) Phillips Self Tapping Pan Head Screws Recommend to print with no infill to ensure the screw supports have enough strength PCB can be found on GitHub (…
100% infill No supports PETG or any stronger plastic Glued using 4 tiny drops of super glue next to the area where the old tabs are/were located. If it breaks in the future, should be possible to remove clean the old glue and glue a new…
You can find these adapters in sites like Aliexpress. They allow playing SEGA Master System cartridge games on your SEGA Megadrive / Genesis console.
This wallmount is for standard MegaDrive or Genesis controllers. See my design list for wallmounts for other controllers Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert…
Basically a stand to fit in the QL to stop the OqtaDrive PCB sagging and possibly shorting on the motherboard. Also a small cap to go over the pin header to help route. PCB can be found here: OqtaDrive QL v1.1 - Share Project - PCBWay…
Simple bracket to allow the standalone PCB to be housed in a real Microdrive case. Closes off the cartridge hole so a logo can be mounted. PCB can be purchased here…
An edited cable anchor for microswitch. The use of umblical chain anchor will block the place for the cable anchor used for microswtich. Hence, I found a new place to mount it on the extrusion.
caja adaptador megadrive usb arduino nano
Hello, Sharing my project of cartridges display stand for Sega Genesis (Megadrive) and MasterSystem games. 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs…
https://datadrivensailing.gitbook.io/wiki/hub/details
https://datadrivensailing.gitbook.io/wiki/boattracker/details
Some supports are necessary Printed at 0.4mm in white pla Easy to print and paint Perfect for gifts or fan collections
https://datadrivensailing.gitbook.io/wiki/hub/details
https://datadrivensailing.gitbook.io/wiki/buoytracker/details
I couldn’t find any rubber pads online that fit my Megadrive II controllers d-pad so I designed this adapter, that allows you to use Dualshock 4 pads instead. The adapter is printed using TPU. Dualshock 2 and 3 pads does not work, those…
Megadrive/Genesis Game Cartridge Storage Box with Hinged Lid Space for 5 cartrdiges. I've tested with European (PAL) cartridges but should also be fine for US ones. Japanese ones are a bit smaller so should fit but not as snug. *Note…
This wallmount is for the Hyperkin GN6 Controller which is a 3rd party controller, designed for use with the MegaDrive or Genesis. See my design list for wallmounts for other controllers Cable area behind the controller. You can either…
if you have a missing latch on your Megadrive case, you can replace it with this one Printed in 0.4 PETG Put some glue on the latch and try it
