41 models
PLEASE POST YOUR MAKES! So I love my little PS90. The trigger was not to my liking so I ordered a K&M Trigger Pack Spring and the P*****d Pawn Creep Killer II (unmodified hammer version). I wouldn't normally freely release something…
This adapter is for an MSA Advantage 200 Respirator (#00817663, circa 2004 according to copyright on the unit) to accept 3M 6200 cartridge filters. Made another adapter by Revenantautumn for a friend that didn't quite fit right. So, back…
Shout out to vyrobca for the original this was based off from. https://www.thingiverse.com/thing:4215903 This remix is a crude combination of an MSA Advantage 200 connector from an adapter previously posted, slapped on to vyrobca's 3M 603…
Makes use of usb type c panel mount ports to give your keyboard a safe and easy detachable cable. I've used this along with a kinT board, and soldered the cables to a usb-micro to mate up to the teensy, but you could also solder straight…
My air conditioner was blowing not enough air into my room, and what air it was blowing was blowing at either a cupboard or straight out the door. The air conditioner vent is an Advantage Air with the vent itself having outer dimensions…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
UPDATE: Source .SCAD files here: https://github.com/SimplifyAndAddCoffee/KeyV2_Advantage download the full repo and make adjustments to the keymaps. There are 4 sets of files for different printing options. Blanks -- These are just the…
I created two different sizes, but only printed the smaller version that is pictured. You can print the blocks in different colors, or all at once with the same filament. The base is printed with a color change at the lettering. I have…
I needed to drill out the gas port on a Ballistic Advantage .308 fluted barrel. This vise block is tapered to fit the contour of the barrel and has a notch cut in it so access to the gas block is easy. Printed in TPU95 it is strong enough…
Dual DAR filter adapter design for MSA Advantage 200LS Print instructions PET-G Infill: 50%+ Contur 4x Support : no
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
This will get Advantage arms glock kit mag to hold 14 rounds(I do have a mod to hold 18 rounds, The only issue is the follower will not lock the slide open when mag is empty(V7 follower should fix this issue, but I have not tested it…
Motivation Without a bridge to lock the two halves together I find that one half tends to migrate away from me over the course of the day. This means my left hand tends to be a row too low and typing the wrong characters, or in the…
This will get Advantage arms Glock .22 kit mag to hold 18 rounds(only v7 is tested 100%). The only issue is the follower will not lock the slide open when mag is empty (V7 follower should fix this, but I have not tested it yet). Lower…
Tracking movement and advantage can be a bit annoying in Return to Dark Tower. I also find sometimes player turn can be forgotten with all the things the tower does at times. I made this to pass around to track the current player as well…
DO NOT USE THIS MODEL TO CREATE SAFETY GEAR! THIS MODEL WAS NOT, SHOULD NOT, AND WILL NEVER BE RE/DESIGNED FOR USE AS OR AS A COMPONENT OF SAFETY GEAR. This model attaches to and holds a Jackson Advantage hard hat suspension in a…
The aim of this project was having Raspberry Pi in the controller body. Originally I wanted to print only bottom part while preserving original top but the dimensions exceeded Prusa Mini bed size therefore I had to recreate the top as…
Description Replacements for two types of buttons on the NES Advantage joystick. One button for the toggle switch (i.e. Turbo and Slow buttons) and one for the Start and Select push switches. If you enjoy or find this model useful this…
Advantage Token for Genesys RPG Category: Games
Broke the aluminium leg of the Kinesis 360 advantage. This is a replacement leg for it. Has been on the keyboard for months and works like a charm.
As I did not buy the “coffers packs” from Restoration Games, I lacked the advantage tokens. However they are quite usefull, thus I designed some myself. I highly reccomend using the 2color printing files, the picture should tell you why.…
I wanted to be able to hold and charge my phone in the middle of the keyboard (blank area). I had the clamp design ready, from the days I used a touch-based security key, so I added a MagSafe charger on top and here it is. I'm also…
The clipper part was copiet/inspired by this design to hold a apple watch magsafe charger https://www.printables.com/model/645685-magsafe-holder-for-kinesis-advantage-2-keyboard?lang=en Be aware that when trying to fit the print to the…
A model that perfectly matches the kinesis backplate area where cable ingress etc is. For doing mods like replacement controllers etc. Theres 3 versions here: Blank: for whatever you want to do Flanged: places flanges where the existing…
If you'd like to replace your Advantage Air/MyAir tablet with a third party one and would like to use the existing wall mounting, print this up and away you go!
TL;DR: Print settings at the bottom Update 2023-09-01 I've made the required tweaks and re-printed, everything now fits like it should. However, I tried this model on 3 different machines and it fitted slightly different in each, it seems…
HP Deskjet Ink Advantage 3776 Paper Holder, made it on tinkercad to resolve my problem.
I replaced the logic board in my Kinesis Advantage with the KinT controller. This deletes the original cables, and leaves you with holes in the back where your USB cable gets run. Instead of trying to reuse the original grommets, I made…
Proto-Advantage.com SBB400 400 pts solder-in breadboard enclosure. I was being lazy so it should be completely redrawn so it can easily be resized vertically but it wouldn't take much to do even without a redraw. Autodesk Fusion file…
Advantage arms flat mag base pad (fits Glock .22 slide kit) This version dose not add any more rounds to the mag like my other one, this one will just allow you to change the color of the base pad just for fun.
I love my Kinesis keyboard, but I want to hack the hardware. The back cover provides very little space inside. This project allows you to customize the back cover for USB hubs that match your needs.
Print: 2 - plates (one mirrored) 6 - 10.7 standoffs 2 11.3 standoffs The longer standoffs go where the red circle is in the photo. You also need the Pillzmod PCB plate to put the Millmax pins in but it may work in the stock thumb PCBs?…
This sleeves allows for the usb-c female side to sit flush with the Kinesis case. This cable/sleeve combo also works with out any drilling or modifications of the Kineses case (which other do require). Here is the exact cable I used *…
Updated to V1.2 can now also be printed out of TPU rather than cutting latex sheet.
I always forget if i hit last round on my last attack for vex, so i made this marker as a reminder to when do i have advantage, and when i dont. Just flip it, and you know Follow me on patreon for all my models:…
These wedge pieces go underneath the stands of your Kinesis Advantage 360 keyboard to provide a tilt angle of -3.5°. I was us originally using post-it note pads to prop up the front end of the keyboard, but having proper wedge angle…
Print: 2 - plates (one mirrored) 6 - 10.7 standoffs 2 11.3 standoffs The longer standoffs go where the red circle is in the photo. You also need the Pillzmod PCB plate to put the Millmax pins in but it may work in the stock thumb PCBs?…
This will get Advantage arms Glock .22 kit mag to hold 18 rounds(only v7 is tested 100%). The only issue is the follower will not lock the slide open when mag is empty (V7 follower should fix this, but I have not tested it yet). Lower…
