Counting matching models…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Handschutz für Graef o.ä. Brotschneidemaschinen, ich habe es in PetG gedruckt, es wird ein kleiner Support benötigt
My CM 800 made quite some mess around the grinder after making several coffees, which is why I decided to make this collector. No ground coffee mess around my grinder anymore. It fits nicely into the bottom piece and features round…
This is a portafilter mount for the Graef CM 800 coffee grinder. It should work as well on the CM702, CM900, and the older CM70 & CM80. It is designed to hold a 58 mm portafilter. In addition moved the adapter some mm up to reduce the…
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
¿Estás buscando una hélice innovadora para tu proyecto de energía eólica? Te presento la mi nueva hélice basada en el perfil aerodinámico SG6043, diseñada para ofrecer un rendimiento óptimo en condiciones de viento variable. Esta hélice…
Made up for RaceFace Aeffect Crank from 2017
Spare part for Bruder excavator Schaeff HR16 02432
This finger guard was created after a coworker asked if I could print replacement parts for an old all-purpose / bread slicing machine Graef EH-170 T. The original plastic got brittle and broke, but using the machine without it can be…
58mm Portafilter Holder for the Graef CM 850 coffee grinder.
Helps keep the dust inside the grounds container of my Graef CM800 coffee grinder. Might also work for other models.
Print it without top/bottom and 0% infill, 3 Perimeter-Walls recommended. 3d Models have Onshape links attached. Onshape
Hallo, Dies ist ein Ersatzteil für eine Graef Kaffeemühle. Dieses Teil soll die Kaffeebohnen daran hindern auf das Mahlwerk zu drücken Lg, Tobi Category: Kitchen & Dining
Imprimir el fuelle en TPU sin soportes. El resto de piezas imprimir en PLA o PETG. No requiere soporte. Imprimir a 0,2 de altura de capa.
Ersatzring für eine "Käfer" Messuhr mit 54mm Gehäusedurchmesser. Replacement part for a "Käfer" precision dial indicator. Print Settings Rafts: Yes Supports: No Resolution: Fine Filament: Noname el cheapo PLA gold-ish Notes: To compensate…
Graef portafilter holder This portafilter holder is for a Bialetti Venus (4 cups) filter with a diameter of 54mm (2,125 inch). With an absolute accuracy of fit for the Graef coffee grinder CM80. Also fits perfectly for: CM81, CM90, CM95,…
I had the issue, that my new coffee scale had a bigger footprint then the grinder itself. Therefore I have designed a Platform which supports the scale. It is hold in place by the recess, where the rubber insert is placed originally.…
I wanted to have some anti vibration feet for my espresso machine, Graef ES90. They slide over the original feet and stay in place because of the TPU elasticity. Print settings: Material: Das Filament TPU V2 / Flex (Shore 94A) Nozzle…
I own a Bialetti style coffee cooker and a La Pavoni Europiccola. So a good coffee grinder is a must have. The Graef CM80 which I have is good enough for me but during grinding the coffee dust flies and sticks everywhere due to being…
Damit man das Graef Schinkenmesser gefahrlos in der Schublade lagern kann, hab ich hier mal einen passenden Messerschutz entworfen. Diese Schutzplatte sollte wohl für alle Classic Messer der Firma GRAEF passen (170 mm Durchmesser). Die…
Die Box sorgt dafür, dass der Handmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the hand mixer has a proper home in the drawer.
If you extend the existing hinges over 90°, the base bends and breaks after some time. This part replaces the base. There will be no ajustability left, so see how your existing hinge is ajusted, and then adjust this part prior to…
Funnel for Graef CM800 Spray with conducting paint to stop static electricity build-up!
This is a remix that makes it easier (or even possible) to clip in the excavator boom for the Bruder Schaeff HR16 mini excavator (02432). Made the lower horizontal strut smaller as the fillet transition between it and the side walls…
Das Zahnrad das zwischen dem Schneckentrieb und des Zahnrads des Messers liegt. Ich empfehle das Zahnrad aus Nylon, PETG-CF oder PC-CF zu drucken.
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: image_file =…
Graef portafilter holder This coffeefilter holder is for a Graef Coffeegrinder. (CM80). To grind your coffee directly into a coffee filter. The holder has a inner diameter of ⌀ 81mm Also fits perfectly for: CM81, CM90, CM95, CM70, CM800,…
Die Box sorgt dafür, dass der Stabmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the immersion blender has a proper home in the drawer.
Not a lot that can go wrong with this print. I printed it in PLA using a 0.24mm layer height.
Replacement stand for GRAEF grinder to accommodate Timemore Black Mirror Mini scale
Unfortunately, the suction cups don't hold very well, so I designed these feet, which can be securely attached using double-sided tape. I printed them with a 25% infill using the Gyroid pattern, oriented vertically on the sides. It's…
Die Box sorgt dafür, dass der Stabmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the immersion blender has a proper home in the drawer.
Die Box sorgt dafür, dass der Handmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the hand mixer has a proper home in the drawer.
Not a lot that can go wrong with this print. I printed it in PLA using a 0.24mm layer height.
3 different styles of crank boots/protectors to fit your Race Face Aeffect cranks. V1 and V3 need re-orienting, v2 is easier to print with tear drop shaped holes and a flat surface to stick on the printer plate. more styles may come in…
Predator - Major Alan Dutch Schaefer (Arnold Schwarzenegger) - 1987 3D printable model.
