P
PrintablesMagprint3d
3.5" HDD STORAGE HOLDER 6x (SEAGATE REMIX)
I remixed the original stl file for a better fit for my Seagate HDDs. Just shortened the model a bit on the Y-axis. Enjoy!
- Downloads
- 541
- Likes
- 66
- Rating
- 4.63
Search results: agate
Counting matching models…
P
PrintablesHuMa
Gridfinity 2.5 '' SSD and HDD Box (Crucial, Hitachi, Intenso, Samsung, SanDisk, Seagate, Toshiba, etc.)
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
- Downloads
- 454
- Likes
- 79
- Rating
- 5
P
Printablesrhapsody_in_blue
Modular External Hard Drive Rack - Fits 2TB / 4TB Seagate & WD
Modular external hard drive stacking system with dimensions that fit popular 2TB/4TB portable drives. I can confirm that the large tray fits a 4TB Seagate Backup Plus and the small tray fits a 2TB Seagate Backup Plus Slim or a 2TB WD…
- Downloads
- 334
- Likes
- 26
- Rating
- 5
P
PrintablesPrintin'Monkey
Seagate External Drive Holder
Seagate External Hard Drive storage container. also has a spot for storing the USB cable. There is a hole in the back of the unit to access the port while keeping the drive in place.
- Downloads
- 284
- Likes
- 35
- Rating
- 5
P
Printablesraymate
Seagate Portable Drive (HDD) Rack/Stand
If you have more than one drive attached to your computer, this rack/stand may make your work space a little more efficient by allowing you to stack the drives. I created it to accommodate my 2TB and 4TB drives. It has internal dimensions…
- Downloads
- 271
- Likes
- 38
- Rating
- 5
P
PrintablesJannomag
Seagate Expansion holder for Honeycomb wall
I've created a holder for my 3.5" Seagate Expansion HDD for the Honeycomb storage wall . It should fit for other HDDs, the size I used for modeling: 121x176.5x37mm + a bit of space (it's not tight fit) It contains two models which need to…
- Downloads
- 195
- Likes
- 36
- Rating
- 0
P
PrintablesDreamer 1
Seagate Expansion stand
Makes it harder for the HDD to tilt sideways.
- Downloads
- 135
- Likes
- 8
- Rating
- 0
P
PrintablesMatyi Bejó
Seagate Expansion HDD Gridfinity bin 3x1
Model number: SRD0NF1 Full height with HDD installed: 85.5 mm
- Downloads
- 130
- Likes
- 5
- Rating
- 0
P
Printablessergi4d
Hp Elitedesk 800 G4 + Power supply + Seagate Expansion HDD holder for home server
Hi, I've done this holder for my "Home Server" to have a mini pc HP EliteDesk 800 G4, a power supply and a Seagate Expansion hard disk drive of 6Tb, to have everything on the same place and have a better airflow. Print settings: 0.20 of…
- Downloads
- 116
- Likes
- 22
- Rating
- 0
P
PrintablesArslan
PS5 HDD Holder for Seagate drive
It is a remix of this model https://www.printables.com/model/127175-ps5-external-hdd-holder with slightly wider depth and width. Printed using PLA with regular settings.
- Downloads
- 111
- Likes
- 12
- Rating
- 0
P
PrintablesHobb3s
Seagate Backup Plus Mount
I needed an easy way to mount my backup drive next to my mounted raspberry pi for a wall mounted out of the way offsite backup solution. I picked up a Seagate Backup Plus Portable 4tb drive and made the mount in inventor. I printed it…
- Downloads
- 104
- Likes
- 10
- Rating
- 4.67
P
PrintablesUser87
15mm 2.5" SSD and HDD adapter to 3.5" Caddy NAS (WD, Seagate)
As said, added 15mm version for fatter HDDS (as WD WD20NPVT or Seagate ST4000LM024) They fit great in NAS or IcyBox, frame are super stable! Print with 3 walls. tops and bottom, 0.2mm layer, 20% infill
- Downloads
- 103
- Likes
- 9
- Rating
- 0
P
PrintablesTenz
HD SEAGATE SSD external 2T BUMPER TPU
SEGATE HS SSD 2T external hard drive usb3 bumper print with TPU 0.15mm QUALITY optional: add a modifier to expose part of the flat bottom surface fill (eg. hexagonal) and remove top and bottom layers
- Downloads
- 95
- Likes
- 9
- Rating
- 5
P
Printablessiddv
Seagate external hard drive stand
A little stand for a Seagate external hard drive to stop it from toppling over. Can put little rubber feet on the bottom too for extra stability. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2…
- Downloads
- 90
- Likes
- 7
- Rating
- 0
P
PrintablesDruckhoernchen
Gridfinity Seagate HD Holder
Seagate holder for the Model SRD0NF incl. cable
- Downloads
- 73
- Likes
- 5
- Rating
- 0
P
PrintablesJosh Edlin
Seagate One Touch External Drive Wall Mount
Some simple straps that will slide around a Seagate external hard drive and allow you to attach it to the wall. I did this to free up desk space and keep from knocking it over. Print it on its side with some chunky layers. I printed this…
- Downloads
- 69
- Likes
- 4
- Rating
- 5
P
Printablesp8ght
Seagate portable HDD Wallmount
I used 4x40mm “Spax” screws. (HDD: STGX5000400) Supports needed: yes
- Downloads
- 68
- Likes
- 6
- Rating
- 5
P
PrintablesBig Dipper
Seagate Slim External HDD Under Desk Mount
This is an easy-to-print bracket so you can mount a SeaGate “Slim” hard drive to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
PrintablesGary_BBGames
Seagate Xbox Series X|S SSD Replacement Cover
I frequently travel and take an Xbox Series S and portable monitor with me. I wouldn't travel with the SSD attached to the Xbox in case I damage the connectors, but was worried I would mislay the original cover, so here is a replacement…
- Downloads
- 67
- Likes
- 3
- Rating
- 4
P
PrintablesBlaž Črnič
Seagate Expansion - wider feet
Wider feet for Seagate Expansion external HDD. It will not fall over when placed on a desk. You will need 5mm silicone/rubber door stopper/bump stopper (2 on each foot). You can use it without it, but it will slide on a desk.
- Downloads
- 60
- Likes
- 3
- Rating
- 5
P
PrintablesDaedadix
Stand for Displaying Thin Agate Slices
This 3D model is a sleek and minimalistic stand designed to display thin agate slices, mineral specimens, or similar decorative items in an upright position. Perfect for showcasing your collection in a cabinet, on a shelf, or at an…
- Downloads
- 58
- Likes
- 12
- Rating
- 5
P
PrintablesDGA
Drawer for Seagate Expansion USB 2.0
Under desk drawer for Seagate Expansion USB 2.0 with locking. Material: PETG, ABS, ASA etc. Layer high: 0,3 or lower Supports are needed.
- Downloads
- 58
- Likes
- 4
- Rating
- 0
P
PrintablesDBosch
Carcasa Disco Duro Seagate
Carcasa de protección para disco duro portatil Seagate Basic Impreso con filamento flexible Ajusta perfectamente. Cuesta un poco introducir el disco duro la primera vez por la parte superior, pero al usar filamento flexible cede…
- Downloads
- 53
- Likes
- 6
- Rating
- 5
P
PrintablesEttienne
Seagate Expansion HDD TV bracket
I designed an HDD bracket which fixes a Seagate Expansion hard drive behind a TV for a friend. Only after this, I realised that a very similar design to this one already exists, so I decided to list it as a remix of Hobb3s design. The…
- Downloads
- 48
- Likes
- 5
- Rating
- 0
P
Printablestheo
Seagate Slim Portable Drive 1TB Cable & Adapter Clip
Cable and USB-C adapter clip for a 1TB Seagate Slim Portable external hard drive.
- Downloads
- 47
- Likes
- 6
- Rating
- 0
P
PrintablesCody Reichert
Xbox Series X 2TB Seagate HDD holder
Hang your 2TB Seagate HDD on your Xbox Series X. The width of the slot is 15mm, so any HDD that size or slightly under should fit. I specifically have the 2TB Seagate XBOX HDD as seen in the pics. Removed secondary HDD slot from original…
- Downloads
- 46
- Likes
- 8
- Rating
- 0
P
PrintablesMike
Seagate Expansion Desktop wall mount
Wall mount for Seagate Expansion Desktop drive 3.5". Fits model from image. For wallmount part add Height range Modifier 5mm - 60mm and increase infill for extra strength. Editable on Tinkercad: https://www.tinkercad.com/things/eiNaEPflXO9
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesNikki81
Seagate hdd stand
simple stand for a Seagate 1TB backup plus slim hdd. Category: Computer
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
Printablessaz
Seagate portable HDD mounting box
I needed something to safely hold my external HDD at my PC. Fits Seagate portable HDD (drive dimensions 117mmx81mmx15mm) and mounted to the side panel of the case with 3m tape. my first project using Onshape so this was a learning project…
- Downloads
- 38
- Likes
- 1
- Rating
- 0
P
PrintablesMcTech3D
Seagate USB Drive Wall Mount
Seagate USB Drive Wall Mount Printed .2 , 15% infill, 2 perimeters. Need two screws to secure it to a wall.
- Downloads
- 37
- Likes
- 0
- Rating
- 0
P
PrintablesHaell
Seagate Backup Plus vertical rack mount
Vertical rack mount for Seagate Backup Plus external HDD. This is used in combination with a NUC rack mount kit and fits in an empty slot. Step file is included so that the file can be edited to your needs. Print Settings Printer Brand:…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesBibsta
Seagate Expansion Portable HDD 4TB – Modular Homelab Rack 10"
This custom remix is designed to integrate seamlessly with the 10" Modular Raspberry Pi Homelab Rack system. It provides a dedicated, secure mount for the Seagate Expansion Portable HDD 4TB, ensuring your portable storage fits neatly into…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
Printablesmch
Seagate Expansion Desktop Cooler Stand
I use some Seagate Expansion Desktop external hard drives for backups on my unraid server. The drives get quite hot and after an hour or so I get temperature warnings from the drive. So I made this cooler :) It needs 40mm fan, preferably…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesSzekely Robert
HDD extern Seagate
HDD extern Seagate for 6 hdd storge
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesPavel Hanuš
Agate, minerals/ podstavec pro minerály, acháty
pedestal for minerals
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
Printableskendrickt43
Coin Drop - Bagatelle
Bagatelle style coin drop game! Hello everyone, this is my first ever designed and uploaded model. I designed it in Fusion 360. This coindrop game is designed to work with all coins under 30mm in diameter (This includes all UK sterling in…
- Downloads
- 33
- Likes
- 9
- Rating
- 5
P
PrintablesHorse With Stripes
Seagate ST-251, 225 Full-Height Front Plate
Print face down with supports, you can push the little LED diffuser out of the old front plate and push it into the new one. I've only fitted this with an ST-251, but I think it should fit other drives like the 225. I used matte black PLA…
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
PrintablesBazilt
NAS / Plex Media Server Enclosure for Rock64 & Seagate 5T HDD
Updated 7/18/2020. Enlarged the size to accommodate the newer Seagage drives. I designed this NAS enclosure to hold my Rock64 case and the 5 TB hard drive which make up my low cost Network Attached Storage system. It is driven by the open…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
Printablesbotebote37
Hard Drive Mount - Under desk - Holds 2 Seagate external drives
This took my KE3 8 hours with 20% infill. Use 3m strips to adhere it to wherever. This will fit 2 seagate external drives comfortably. Can be printed upright, without supports.
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesPavel Hanuš
Podstavec pro minerály (Acháty, agate)
podstavec na minerály 10x40 a 15x40mm
- Downloads
- 29
- Likes
- 6
- Rating
- 5
P
Printablesdl33t
Seagate OneTouch Din Rail mount
Needed a way to mount my portable hard disk on the wall. Din rails are pretty ubiquitous, so I decided to use that. Put the two pieces together with a 3mm screw or super glue. It is a pretty tight friction fit so it will stay in the box.…
- Downloads
- 28
- Likes
- 4
- Rating
- 3
P
PrintablesValRC
HDD Drive Disk Sander Disk - for Seagate BarraCuda 1TB
This is a disk sander I made from an old Seagate BarraCuda 1TB HDD Drive. Just remove everything from the HDD until there's only the motor and the original mirror-looking disk with the data on it left. then unscrew the disc and mount this…
- Downloads
- 27
- Likes
- 13
- Rating
- 0
P
PrintablesHaell
Seagate Backup Plus vertical rack mount
Vertical rack mount for Seagate Backup Plus external HDD. This is used in combination with a NUC rack mount kit and fits in an empty slot. Step file is included so that the file can be edited to your needs. Print Settings Printer Brand:…
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesTom N.
Seagate RAIL for 4-in-3 | 3.5"/5.25" HDD bay
This can be printed as is. Place it sideways on the printer bed and enable normal supports.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesFlowsen
Festplattenhalterung SeaGate Hub
Die Wände sind mit 1mm dünn, die Bohrlöcher sind für die auf dem Foto dargestellten Spax entwickelt. Nicht zu fest randonnern, bei mir ist die Rückwand ein wenig gesplittert. PLA-NX1 von Extruder wurde hier benutzt. Hab den vorbereitete…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesS. Vourc'h
Storage for external hard drive - LACIE and SEAGATE
This a storage box for external hard drive for LaCie Portable SSD 1TB (3 slots) and SEAGATE Expansion 2TB (1 slot)
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesHaris2887
USB HDD enclosure (Seagate WD) 2.5"
I made this USB replacement for my 4 TB Seagate HDD. 2.5" portable drive.
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesGeekdad_3D
iMac HD mount Seagate Expansion
I made the opening narrower and raised the back to better keep the drive from falling backwards. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 25% Notes:…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesDenny89
Seagate Backup Plus HUB microusb and power protector
Seagate couldn't choose a worse USB connector for their drives (USB 3.0 Standard-B would be perfect, but it would cost them some cents more). It's already very flimsy out of the box…now imagine how it is after some plug/unplug and falling…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesElissen
Wall mount for 4 Seagate Basic Portable Drives 2.5"
I connected several external hard drives - Seagate Basic 2.5" portable drives - to my Raspberry Pi so it so I can use it as a NAS storage. This part will hold 4 drives. I printed it in PETG - the previous version printed in PLA started to…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesOldManHomer
Seagate Backup Plus Spacer
I created this so I could stack my Seagate Backup Plus drives and allow sufficient air flow. Print Settings Printer: Monoprice IIIP/Wanhao Duplicator I3 Rafts: No Supports: Yes Resolution: .200 Infill: 20 Notes: Supports to bed only…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesBordello_Labs
Seagate Portable Hard Drive Desk Mount Holder
Overview This is a desk-mount holder designed specifically for a Seagate Portable external hard drive . The holder uses 1/2-inch VHB tape to mount securely under or alongside a desk, helping keep the drive protected, organized, and out of…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesDavid Sahagun Mayorga
Compact Raspberry Pi 4 NAS Case for Miuzei Aluminum & Seagate Slim
This custom 3D-printed NAS case is designed to house a Raspberry Pi 4 with a Miuzei aluminum case and a Seagate Backup Slim external hard drive. It provides a compact and efficient storage solution , ideal for DIY NAS setups, media…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesOldPeterBG
Food Chain Magate Card Organizer
Card Organizer for Emploee & Milestone Employee 5slot x 8 Milestone 6 slot x 6 slot width :8mm, player can easy see through next line. you can group these boxes with tray, and use lid to protect the card. easy assemble, easy to split
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
Printablesrichprints3djax
seagate backup plus vertical stand
seagate backup plus vertical standfor seagate backup plus model SRD00f2
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesGundogForge1701
Seagate SAS Rails for 4-in-3 | 3.5"/5.25" HDD bay mount
Made these rails to install seagate SAS drives in the 4-in-3 | 3.5"/5.25" HDD bay mount model. Recommend in PETG!
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablesberlincount
Seagate Expansion Portable Drive SRD0NF1
Print and mount with proper screws. Original used 4x40mm “Spax” screws.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesGeekdad_3D
iMac HD mount Seagate Expansion
I made the opening narrower and raised the back to better keep the drive from falling backwards. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 25% Notes:…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesGabriel M.
Gridfinity Seagate External HDD holder
A Gridfinity holder for the Seagate External HDD, with extra storage for the cable. Should hold any other external HDD with a maximum of 14.5 mm thick and 80 mm wide
- Downloads
- 15
- Likes
- 2
- Rating
- 5
P
PrintablesSeth Bowen
Seagate Backup Plus Desktop Drive Wallmount
This is a simple Wall mount for a Seagate Backup Plus Desktop Drive. Mine is a model SRD00F2, I don't know if it will fit other models or not.
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesElton D
HD SEAGATE EXPANSION - Expansion Porteble - HDD BOLT COVER Drive
Raplace side hold HD Bolt PETG 0.20
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablesgedeyenite
Seagate 5G USB Drive Holder - Gridfinity
I love a custom Gridfinity bin. This one is very specific to the Seagate round 5GB USB Drive that has a built-in USB cable. I rarely use it, but I don't want to get rid of it. LOL.
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablesbr0berger
Ersatzgehäuse für Seagate Expansion Drive
Das originale Gehäuse lässt sich nicht zerstörungsfrei öffnen und so habe ich ein Ersatzgehäuse entwickelt um die Platine und Festplatte Festplatte weiter nutzen zu können. Video: Schrauben: M2 ( Kopf 3,5mm ⌀), Gewindelänge ca. 8mm Ich…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesVittorio84
Seagate Backup Plus HDD stand
My Seagate was falling down quite often, so I decided to make a small and easy stand for it as there was no stand for this precise model of HDD here. Printed with Jet Black PLA. Feel free to do whatever you want with the model :-)
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesGraffiti Print
SEAGATE CABLE 1T SLIM
i made a segate cable protector the segate is slim 1T byte i suggest print in PETG PLA or TPU LAYER-.20 OR .16MM SUPPORT - YES FILL - 5 OR 10 %
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesPavel Hanuš
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals)
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesmatthias_port
Hard disk holder for s-ata disk in a Seagate Goflex
Recently i bought a Seagate Goflex Net but the original Seagate disks seems to be to expensive. So i put in a normal cheap S-ATA 2.5" disk. They fit in but very wobbly. OpenSCAD and Thing-O-Matic to the rescue! :-) Category: Other
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesBlazinfatherted
Seagate logo for office or workshop
Seagate logo for office or workshop
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesMorten Hjellvik
Alien Enclosure for Seagate Expansion
I wanted my boring Seagate Expansion to look straight out of the Aliens movies franchise. Designed this in Fusion with the contrast of organic shapes and industrial shapes. Looks awesome printed in PLA Burnt Titanium or some other galaxy…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesSmeef
Seagate Backup Plus Portable HDD USB-C Enclosure
A protective enclosure for converting micro-USB 3.0 ports to USB-C ports on Seagate Backup Plus portable hard drives. Requires a male micro-USB 3.0 to female USB-C adapter with the same dimensions as these:…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesegz
Compact Seagate SSD Cap
I lost the cap to my 1TB Seagate SSD, so I made a new one to keep the USB-C connector protected. Prints without supports in about 14 minutes on the Prusa Mini. 0.2mm layer height, PLA. Pictured printed with Prusament Galaxy Black PLA. The…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesKyle Steinbock
Seagate Slim Hard Drive Case
Hard Drive Laptop Mount Case Designed specifically to fit the Seagate Portable 2TB External HDD (STGX2000400) , this mount case lets you attach the drive directly to your laptop, PlayStation, or Xbox for a clean, integrated storage…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesiamstevedavis
Mac mini A1347 (2011) + Seagate Expansion Desktop Mount — No Screws (v1)
# Mac mini A1347 + Seagate Expansion Desktop Mount — No Screws (v1) ## Summary A modular stacking mount for a Mac mini A1347 (2011) and Seagate Expansion Desktop drive, secured with printed clips, sliding retainers and removable keys. ##…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
Printables
USB HDD enclosure (Seagate WD) 2.5"
I made this USB replacement for my 4 TB Seagate HDD. 2.5" portable drive.
P
Printables
Seagate RAIL for 4-in-3 | 3.5"/5.25" HDD bay
This can be printed as is. Place it sideways on the printer bed and enable normal supports.
P
Printables
Seagate SAS Rails for 4-in-3 | 3.5"/5.25" HDD bay mount
Made these rails to install seagate SAS drives in the 4-in-3 | 3.5"/5.25" HDD bay mount model. Recommend in PETG!
P
Printables
Seagate Expansion Portable Drive SRD0NF1
Print and mount with proper screws. Original used 4x40mm “Spax” screws.