Counting matching models…
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
My takes on the NPCs and Creatures from Rime of the Frostmaiden are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
I got asked if I can make the logo so that it can be placed on a table or something. Made some changes and only tried printing the connection between the parts. For me it was a snug fit that should work to hold it together but you can…
Here are the files for The Maiden of Death a spooky graveyard statue keeping a watchful eye over wandering spirits. I printed mine at 0.2mm layer heights and with 5% infill, you will need just a little support under the cheekbones I hope…
New and Approved Iron Maiden Logo with three depths. Designed Logo for Pinball and illustrates 3D Effect. Good for Toppers and for Display. Recommended Iron setting for the top layer finish
It has all happened before and it will all happen again. In hot pursuit of the Colonial Fleet, the Cylon Raiders swarm in to attack with overwhelming numbers. Commissioned to go along with my Viper MK.II Kit Card , you too can create your…
Hi I've taken what I can from the original files and converted them as best I can to a possible prinatble file. Hopefully there is something in amongst this model that will help you with your project. As always check the sizing suits your…
It belongs in a museum! Or in your office. Or maybe the mantle. Who knows?! It's entirely up to you where to display (or store) the Ark of the Covenant. Hopefully, if you're taking the time to print this out, you're not considering…
The braided Christmas tree is an easy model to print. The tree and star need supports and concentric top surface
This is a reupload of a model made by MAVEN_STUDIO - https://www.thingiverse.com/thing:3760054/ A simple-looking model of Moomintroll and Snorkmaiden sitting down, but surprisingly difficult to print - be wary. I recompiled the model a…
This is my model of the B-21 Raider. Not a very accurate model with the public knowledge but close enough to get the idea.
A modest, traditionally dressed maiden tired of the patriarchal oppression. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants…
27. Dec. 2023: A sports bow that can be used with my UGH mod Renamed the model. This is now a set Available soon: Back holster for the bow Hip holster for the ice axe Print the parts with 0.15mm/0.10mm layer height. Bow: You will need my…
A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…
A lady from the north. The axe is not only for chopping wood. Suitable for 28mm tabletop games. Could be a Frostgrave prop. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
takes a 1/2 in dowel in a couple spots. split for printing. Category: Props
Just a simple Raiders Name Tag ;) Easy to print in 2 colors.
Garden Maiden Collecting Grapes. is it just me.. or “Dude looks like a lady”
This model is compatible with the lego system.
It's quite large - 140 mm, but looks nice :)
incruste la cabeza del modelo en el DUMMY 13
A post-apocalyptic remix using Super Hero Mask
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
Two piece braided slide hair pin. I wanted to make hair accessory that would look fun in dual color. Tested with 0.4mm nozzle Sunlu PLA+ 15% infill Layer height: 0.1 mm First layer height: 0.2mm Solid layers, top and bottom: 6 5 mm brim…
ARC Raiders Shield Recharger - Assembly Guide Listen up, Raider—getting vaporized by ARC drones because your shields are down is embarrassing, so print this recharger and stay in the fight! Instructions Print all parts using your…
The Maiden's Tower (Turkish: Kız Kulesi), also known as Leander's Tower (Tower of Leandros) since the medieval Byzantine period, is a tower lying on a small islet located at the southern entrance of the Bosphorus strait 200 m (220 yd)…
Design Concept The "MATRIARCH" model is inspired by the game ARC RAIDERS, capturing its essence with intricate details that bring a mechanical design to life. Its robust limbs and detailed bodywork showcase the power and complexity…
What's this about? This is Iron Maidens mascot, Eddie, in the “Book of Soul”-Edition. You can print this bust with every 3D printer in one colour, or with the MMU2 in five colours. For a single-colour print, use the provided *.stl-file.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
This is a remix of: https://www.thingiverse.com/thing:2763110 I also preferred the rear axe tip section of this model: https://www.thingiverse.com/thing:3064861 ... So I mixed that part into this model (before I sliced it). I chose this…
Tusken Raider and his Bantha. “bantharaider” is model combined.
The other files are complete ready to print, but will need seperating using Windows 3DBuilder. here is a link to a video to help with further seperation. https://www.thingiverse.com/thing:3077839 Print instructions Unassociated tags: Body…
Thank you for downloads, likes… Enjoy !
Elegant classical female figure with flowing dress and floral wreath, inspired by timeless sculpture and beauty.
This is a reupload from Thingiverse user Nanris , as I think this model is pretty good and it should be accessible for more people :) Attached in Files section you can find two STLs for Snorkmaiden and Moomintroll figures. Printing it…
This Arcs not created by my self i will share with all. And i Link it to the creator from this files
Simple ARC RAIDERS coaster i made for using the AMS function and print in two collors The lettering is 0.4mm and the coaster is 2mm thick so i doesent use much fillament at all *You can print the Base part without the AMS and Pause at the…
hell divers 2
A goblin raider miniature for tabletop gaming. Print instructions Category: Creatures Print Settings Printer: Monoprice Select Mini Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 20
Made this for a buddy of mine. All done in tinkercad. The silver sections are raised up so it is ready for a color change at 4.2mm. Print instructions No specific instructions. Color change at 4.2mm.
this print is going to need lots of supports so i would recommend playing around with the demotions depending on the size.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Raider X Only | Raider MP17 Here I had trouble with 0.6 print head, which would not accurately print the surface of the cheek weld near the flux rails. The rail position distance to the surface is limited by the “gas cap” of the raider,…
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
Here is the awesome looking Las Vegas Raiders Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
FIRST OF ALL: the model is not mine, I found the STL (probably a scan) on internet, I found it under many alias, so I do not put here any, if you recognize that it is yours, please let me know I put your name and link. It could be printed…
I saw shusy's design a while ago and had the idea for this. I used Ctrl-P's remix for the base. I prefer it without the lid so you can see more awesome Tusken detail. I also considered gluing a spring in there to make it more of a…
This charming gardener gnome is a delightful new addition to the whimsical gnome collection. She features a tall, pointed hat that bends gently at the top and fully covers her eyes, with only her round nose peeking out. Like the rest of…
The Maiden's Tower (Turkish: Kız Kulesi), also known as Leander's Tower (Tower of Leandros) since the Byzantine period,
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
Pour ceux qui ne connaissent pas le " Tétra’aide ", il a été crée par Bruce Demaugé-Bost de l’école Fréderico Garcia Lorca de Vaulx en Velin. Au départ cet outil permet à l’élève d’indiquer, tant à leur enseignant et à leurs camarades…
ENGLISH Here is my new #3dconception inspired by the already existing model: the Tetra'aide Free to download on my thingiverse page (link in bio), it is designed to express the level of difficulty, to ask questions during group or…
The whole model is about 3.317 inches wide one way and about 2.043 inches wide the other way and about 1.741 inches tall (can be resized if needed). Estimated print time is about 1:15:00. It will need supports. Enjoy!
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Now you can have your own Lagertha to snuggle up with. Unlike the character, supports will be needed. You'll also need to glue her shield on.
A printable model of a grenade from Arc Raiders.
I am pleased to present the logo model that I have created, which I hope will prove beneficial for your projects. This logo has been designed using Shapr3D, a versatile modeling application that allows for precision and creativity in…
Wall Count: As many wall counts to fill the entire part Infill: 100% infill Material: ABS/ASA
I wanted to design this braided whip last year, but I was missing modeling skills I needed. This year it worked :) The most difficult part was to understand the pattern, because on thing is the process of making it from willow twigs and…
Hairpin for cosplay. Dont forget that you need a hairpin clip to finish it or another hairpin making tool.
This model is compatible with the lego system.
It supports standard sleeves and vertical storage. All models must be printed once.
Been on wanting some Berserk props, so modeled this up. Takes a .75in dowl through the center. Split for smaller printers. Category: Props
It's a stand for displaying. Here is the file of Arc Raiders Shield Recharger ( Made of Magic Make)
Iron Maiden Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might like one…
A graceful winter-inspired Snow Maiden figurine featuring soft flowing hair, a fur-trimmed dress.
Printed with 0.16 mm layer height in PLA. Length is 15 cm, you might want it a little smaller. Modeled after the Hawk Raider sword from the Golden Age arc. Kind of big, to be comfortable for use with the big hardcover berserk manga. May…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is a small Raiders logo placard (125mm x 137mm). It will print quickly since it is light and thin. Three colors: White first, then grey and finally black.
Mascote da banda Iron Maiden, formato de busto para impressão em filamento.
This model is compatible with the lego system.
it is renegade raider doesn't matter about filament or printer
And once again another one of the many files I have here on offer for free, The list of models goes well into the new year, so looks like I'm going to be busy busy busy, Cheers Jace
REMIX of the raiders logo but made thinner. Print combines to be 2cm thick instead of 8cm.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 174.82x200mm in size. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2mm and the Actual Depth is 1.9mm…
Raiders' risk life and limb for this legendary piece of loot. What seems like a meaningless hunk of rusted metal, is actually one of the hardest and most sought after items in Arc Raiders. Now you can scavenge as many as you like, with…
Design Concept The design is inspired by a creature featured in the game ARC Raiders, known as "The Queen." Its mechanical appearance is enhanced with pronounced limb segments and intricate details that bring the model to life. Purpose…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
keychain of iron maiden the gcode contains the pauses for the filament change. these are the times: 1- black 30 minutes 2- white 10 minutes 3- red 16 minutes Share your makes 💙Did you like the model? Support me with a donation here:…
Elegant Winter Girl Statue
Here's my model for the Vermling Raider, from Gloomhaven: Jaws of the Lion! I couldn't find any high resolution artwork for this guy, so I had to work off of the cardboard standee and the other Vermlings from Gloomhaven. It was a bit…
This prop is inspired by Tusken Raiders chief staff. Each part is printed in a different colored filament, so they're ready to go right off the printer. Each piece features threaded connectors so it's really easy to assemble and take it…
Las Vegas Raiders Switch Cover
Design Concept The ARC Raiders game robot "Bastion" is inspired by futuristic defense machinery, featuring a robust design with a mechanical aesthetic. note: Use of AI as an aid in the creation of this piece. Function It serves as a…
A replica of Lara Croft's Climbing Axe from Tomb Raider.
Two color print. Designed for 2 inch receivers. Scale as needed to fit other sizes.
![NFL Raiders Logo [UPDATED]](https://media.printables.com/media/prints/152477/images/1433724_922d1b5e-3fab-4447-bd0a-94cd3eaf200a/3d-print-raiders-logo.jpg){kind=logo}
