Counting matching models…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Bike holder for the 32oz Nalgene Waterbottle. Will also suit other bottles of a similar diameter (92mm). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Notes: Printer…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
I designed this sipper after a downloaded model resulted in an in proper seal. Also it was printed with overhang which required support and was less hygienic due to the imperfections on the supported surface. So I designed this model with…
One of our Nalgene lids lost in a heated altercation with our dishwasher. This is a clean-sheet design that functions and seals much like the original. I printed this cap with the opening down and with supports (manual set) under the…
Bike holder for the 1L (32oz) Nalgene water bottles for offroad use. The holder is out of one piece but the top of the holder is a clip which protect your bottle against falling out. In the back of the holder are many slotted holes which…
Insert for Tesla Model 3 center console cup holder to hold a 32 oz. Nalgene bottle. The model is slightly tapered from the bottom to the top to fit snugly inside the cup holder and the Nalgene bottle is a snug (but not tight) fit. The…
This car cup holder is ideal for large Nalgene 32 oz water bottles. It should fit most “standard” cup holders in vehicles. I tried several designs, and many of them were too fragile and broke easily. This one really holds up! I remixed…
I love Nalgene bottles the most. They don't have a weird plastic taste; they are easy to clean and they show how many ounces or milliliters of water you have (which is great for cooking when camping). But there looks to be no water bottle…
I wanted to be able to put my 32oz Nalgene bottle into the cupholder of my 2015 Hyundai Sonata so I designed this OpenSCAD to create an adapter for my vehicle. Hopefully others can use it to create files for their own vehicles or…
Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.
Just a simple Nalgene Cap for shower, just need to put a straw or aquarium tube on it for escape air outside the bottle.
Cup holder upgrade for my 1997 Honda Civic DX Hatchback. Now fits 20oz tall coffee cups and 1L Nalgene bottles. Unsure what other civic models this might fit, but if I can figure it out, so can you. Make sure to use PETG so it doesn't…
I designed and printed a new lid after the dishwasher melted the original lid. The first time it screws on, it may be tight. Don't over tighten, it may crack.
I designed this cup holder to fit in the gap between the couch cushions. on my couch it even fits between the cushion and the arm rest.
32oz/48oz & 16oz Nalgene Wide-Mouth Water Bottle replacement Lids I've been using Nalgene water bottles for years for the tea I drink at work, and the coffee I drink after lunch, and I've never been super happy with the lids. the tether…
Carabiner Ring Attachment for Nalgene Water Bottles – PLA/PETG/Nylon Version A practical 3D-printed carabiner ring designed to secure a Nalgene water bottle to backpacks, gear loops, or climbing packs. Material Performance: This model…
Cup holder that holds a 1L Nalgene to your SUP (Stand up Paddle Board) using the Bunge straps.
This ring will allow you to attach your water bottle to anything you can get a carabiner around without the slightest worry of breaking your Nalgene's cap strap. Perfect for backpackers, adventurers or anyone who wants a crazy helpful…
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
Print on TPU and fit on your bottle. You will need to remove the old loop without damaging the lid. I updated the model, and the V2 version provides a tighter fit on the lid.
The cupholders in the center console on the 2022 Audi A3 are too narrow for a wide water bottle like a Nalgene. This is an adapter that inserts into the cupholder and has a wide mouth to hold a Nalgene bottle. I like having a full Nalgene…
Replacement cap and strap for Nalgene Titan narrow mouth water bottles. Cap: PETG, supports generally not needed Strap: TPU, easy print Fits tight and hasn't leaked on me yet. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
The original model is great except for where it actually bolts on the bike. I don't know about your bike but mine is made out of round tubes with little inserts in the tube to screw into. The flat surface that the original model has where…
Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.
I built off of @corbul0's model to repurpose it for drink containers which are more useful for me: nalgene bottles and cycling water bottles. Nalgene's just sorta flop over in the OEM cupholder as the cupholder base is too small, and I…
I like a Nalgene bottle for around town and at work, they’re a convenient size for iced tea especially. But I don’t love the cap attached and flopping around while I’m drinking. This little loop zip ties securely to your Nalgene to give…
Printed in petg, .15 layer height, 35% infill, 4 shell perimiters. Vertical protrusions can be trimmed down with a razor blade to accommodate cup holder size to your liking.
This is an adapter to put a Nalgene bottle in a fairly standard car cupholder, Print should be in VASE mode for best results. I started out with a fairly generic design, then got intrigued by a YouTube video regarding using vase mode for…
Insert for 500ml Nalgene bottles to assist with ideal drink flow
Jig/assembly/adaptor to allow you to print on a Nalgene bottle using the rotary bed on the Eufymake E1 UV printer.
The strap of my Nalgene bottle broke. I created a replacement strap, with a small gap that I can use to "screw" the strap back in place. I had to cut a similar gap into the bottle ledge. This was designed a while ago. There are many…
I created this cupholder adapter for my 2016 Subaru outback to hold a hydroflask or nalgene. This print requires supports from the build plate, but is optimized to require very minimal supports. I printed this at 0.3mm in natural PLA and…
This replacement strap is intended for printing with TPU filament. It is stronger and more versatile than the original which tends to break in the corner from using the strap as a carrying handle. This strap has several advantages over…
This is a dryer stand for a wide mouth nalgene bottle. UPDATE I made a customizable version of this thing. Category: Kitchen & Dining
After the strap of my Humangear Capcap+ ( https://www.humangear.com/shop/p/capcap ) broke, I created this replacement part. While the cap itself greatly enhances the comfort of drinking from a Nalgene bottle, the strap's durability left…
Adapter to attach a Sawyer Squeeze to a Nalgene narrow water bottle, with a vent for the air displaced when water enters the bottle. Printed at 0.2mm with organic supports, but will probably print fine without them.
I created this adapter so I could hook other 28mm thread devices to my Nalgene bottle. There are both Male and Female 28mm thread adapters. I printed these using 1.6 Dynamic and it gave it a nice smooth finish. Supports are set at 65…
Effortlessly turn your Nalgene water bottle into a water dispenser for washing your hands or rinsing toys. The end flap snaps closed, and the model doesn't use any springs, o-rings, or screws. No brim or supports are needed. Print the…
Interlocking Nalgene/Hydro flask water bottle holder. Printed with PLA Plus at 5% infill. Inner diameter ended up at 94.144mm
What is it? Strap for holding the Nalgene 1L bottle cap. Why make it? Original broke. Latest revision Designed with FreeCAD 0.19 BOM To be printed out of flexible material Assembly Mount the small side on the bottle cap Mount the large…
Adapter to put a Nalgene 32oz water bottle in a car cup holder. Printed in Overture black PETG, 0 supports
Heavy-duty bottle cage for holding a 1-liter Nalgene or similarly sized bottle. A 1-inch velcro strap is required to secure the bottle along with electrical tape or adhesive foam to prevent it from slipping out. I wrap my bottles in…
Why buy a new strap that comes with a lid when you can just print the part you need at home? Designed to the same standards as the original with the flex feature in the middle. Printed in Fillamentum Flexfill 98A TPU on a textured build…
3-piece modular cup holder for F-150 Inserts anchor down into existing cupholder using built in spring clips and expose M5D8L9 heatset inserts on top, spaced 4.5" center to center. Cupholder itself fits silicone booted hydroflask/Nalgene…
Wanted a version that used slightly less filament, allowed hopefully better airflow, and had a loop for hanging under the sink. Works beautifully.
Wanted a Nalgene holder for my Peloton, but all existing models I could find were for the Bike, not Bike+, so I remixed a holder design for Bike to adapt for the Bike+. The design slips over the upright tube frame and is pressure fit,…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This cup holder is specifically designed to fit a standard…
These are like bicycle training wheels First learn how to drink with the easy sipper lid and slowly you will build the confidence to try your first sip without the lid Happy drinking
Like the original model, this remix holds either a 14oz Yeti Rambler or 32oz Nalgene bottle. This is modified to attach to universal cup holder for cars that screws into place like this one . Printed out of PETG for better heat resistance…
Made for my GF's 2006 CRV cup holders. They are super shallow and her Nalgene and coffee mug will fall out of them if she does any amount of accel/deceleration. Even a can of soda is pretty loose in them. This cup holder adapter press…
This was designed for my sister's 2007 Honda CRV. I think it would probably work for any 3rd gen CRV, so 2007 - 2010. This is an adapter so a Nalgene or Hydroflask, or similar sized water bottle can fit in the cup holder. The V1 model was…
I needed an offcenter nalgene extender for my car cupholder. This is designed to be printed upside-down with supports in the middle. The holes are to prevent suction when placing the bottle in the holder.
Nalgene bottle shaker insert This insert fits in a classic (wide opening) Nalgene water bottle. It allows using your Nalgene for powder drinks (e.g. protein shakes) and turn it into a shaker bottle 😎 Printing instructions The model can be…
Insert for 1L wide-mouth Nalgene bottles to make it easier to drink. Includes a lip along the non-drinking edge of the insert to help with removal. Print from a food-safe filament. Print with default settings without supports. Version for…
Designed for my lawnmower but usable on a bike or anywhere else you want to strap it. Printed in PETG with 5 perimeters and 40% infill. Velcro strap is recommended for most uses, especially if you expect it to jostle around. The models…
This bottle holder has an inside diameter of 94,5 mm (3,72 in) at the top. The outside diameter at the bottom part is 81 mm (3,19 in). PETG didn't make it this summer. It deformed a bit because of the sun and the pressure at the lower…
Fits a classic 32oz Nalgene water bottle in the center console of a 2015/2016 Honda CRV, using the smaller rectangular section of the console to not block the main cup holders when not in use. Print in the provided orientation with…
Summary Ever go to take a drink and get splashed from the water in the cap of your Nalgene? Maybe you have adopted the "one finger hold down" grasp as you drink. This little print keeps the lid down allowing you to turn your bottle into a…
Cup/bottle holder; Height: 15cm; inside diameter: 9.4cm Fits 1L /32oz nalgene bottles, ninja smoothie bottles and other large bottles. I also made the clip for it slightly tighter (2mm) and 1mm wider around the attachment part so it sits…
Did a little remixing to add a loop for my carabiner and reduce the stress of on the actual strap. Be sure to use flex, getting on the lid and bottle took a second but it eventually went on without modification.
Created to add a finger hold to my Nalgene 40oz water bottle. Used original “lid sling” loop as a finger hold and broke it off of lid.
FULL CREDIT GOES TO Senior55 ON THINGIVERSE. UPLOADING HERE FOR THIS COMMUNITY. Adapter Katadyn Befree - Nalgene gourd (hole to evacuate air)
This Nalgene adaptor was designed for a Mitsubishi Colt drinks holder but should work in cars with a similarly dimensioned holder (75.5mm upper diameter, 72mm lower diameter and 55mm depth). The holder also has a hollow base to allow…
Wanted a bottle dryer that did not touch the inside part of the bottle. So I designed this to rest on the outer lip. Printed with PLA at 10% density with no supports.
Description Adds a carabiner loop to the bottle for those who don't use the standard strap point on their Nalgene or similar bottle. For example, if you use the capCAP+. This just goes onto the standard strap point and gives you a hole to…
The bottle cage and bike mounting bracket are printed separately. Use epoxy or some strong glue to glue them together. The bottle is secured in place using bungee cord. I used was 4-5mm bungee cord. Add one flat head M4x8 screw as an…
This is a very simple cupholder adapter for the 6th Gen (2023-2025) Honda CR-V. I printed it in ASA, no supports needed. Update 11/30/24 - Resized the base of the adapter to help prevent wobbling while in the cupholder.
Use at your own risk with attention to the fact that FDM printed items may have health concerns. Filament choice and sanitation of the printed surface are both concerns to think about! I printed in Bambu ASA at 0.16mm layers with default…
I take my Nalgene Silo water bottle to work every day, and I fill it up with ice then water in the morning. Unfortunately, the 48 ounce bottle is too big to neatly fit under the 80mm diameter ice shoot, so I designed this funnel to keep…
Replacement cap tether for a narrow mouth Nalgene water bottle. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 100% Filament: Generic TPU Notes: It helps to warm it up a bit to…
I made this model because the original strap of my 1L Nalgene bottle broke, but the bottle and the cap still works. Cut away the old strap and put the new one on. Print in TPU 100% infill or enough walls and top/bottom layers to make it…
Best to prints large opening on the build plate.
Made this for my own particular needs, and figured I'd share in case anyone else finds they can benefit from it. I added cutouts to the bottom to make it easier to wedge into my cupholder around/on top of some stuff I keep in there. I…
I got myself a new Nalgene water bottle a little while ago, and decided I wanted to try making a handle for it. This is the result! It holds the bottle securely but not so tightly that it scratches the bottle. It was a fun model to draw…
This is a simple rack for Nalgene 1.2 mL screwtop cryovials (cat # 5000-0012), but may also be applicable to other products in the same product family. It is designed so that each well engages with the nubbins in the cryovial base to…
🪓 Deko-Galgen für Woodo-Puppen & Mini-Figuren Hier findest du einen kleinen Galgen als Dekoständer – ideal für Woodo-Puppen, Schlüsselanhänger oder Mini-Figuren mit Schlaufe. Die "Hängehöhe" beträgt ca. 14 cm , also perfekt für kleine…
Nalgene Finger And Carabiner Loop 32 oz Slim Neck Printed in PLA requires a bit of coercion to get on but after that it's a secure fit.
Two models included. The original uses more material and takes longer to print. I used a pretty basic prusaslicer speed or draft profile for the print.
Cupholder adapters for the 3rd generation Toyota Tacoma designed to fit both the front and rear cupholders and hold your 32oz Nalgene bottle. The lower profile on the front cupholder model roughly matches a 24oz yeti, while the lower…
Modified this to fit 32oz Nalgene bottles. Added a chamfer so no support is needed.
Prusament PETg transparent 15 % infill 0,2 structural, with honeycomb infill Second Glue e.g. Loctite 2-2,5 mm drill bit for corrections of holes for pins, be attention about orientation of pins - only one direction is right
I suggest to print it with an high quality slicer profile for better details and overall quality.
Nalgene/Hydroflask mount for the Uppababy Vista stroller.
Were not happy with the Nalgene Cupholders for my Ioniq 5 I found online, so I designed my own. Fits a Nalgene but also a small soda can. Locks with the existing pins in the cupholder and unlocks by twisting. Recommend using PETG because…
Ever had a Salami or a Polnische (poland style sausage) with way too much moisture and way too less flavour? I got you covered! With this (clunky) Wurstgalgen you could dramatically increase the flavour and texture of your favorite Wurst!…
This is a compact, stable drying stand designed specifically for Nalgene bottles , compatible with both Narrow Mouth and Wide Mouth models. Designed to promote drying while keeping a minimal footprint on your counter. The stand features a…
I needed a funnel of sorts to connect my MSR Guardian water purifier (same threading as a wide mouth Nalgene) to my Cnoc collapsible water bottle so I made one. It is a male Nalgene thread and a female Cnoc thread The image shows it…
I carry my Nalgene water bottle on my belt as I found that I forget it if it's not attached to me. I have used plenty of carabiners but find them to be pokey and prefer not to have the latch on my belt loop. So I finally got down to…
Transform the way you filter water on the go. This innovative adapter allows you to use standard Brita filters with your favorite Nalgene and Hydro Flask bottles — no bulky pitchers, special bottles, or proprietary accessories required.…
Update 28 May 2024: I have remixed a V2 to rectify issues I encountered with this design. My initial desire to keep it slimmer resulted in the base of the ring being too near the center of gravity and making it roll over with a slight…
This adapter connects your D18 flashlight to a Nalgene water bottle. I printed this out of PETG using a 0.4mm nozzle. Consider supporting us on Patreon!
print settings: PLA 2-3 outlines ~15% infill print time ~ 35min weight ~7.4g
Printed in PETG and seems very durable. I tried flex filament but it stretched and slipped of the neck of the bottle. For bet results, remove the lid and it's strap and put the carabiner neck attachment on the bottle, then reattach the…
Is Your Nalgene bottle just too generic? This is my Nalgene bottle clip that can make it easier to find your bottle among others. It is attached to the strap connecting the cap to the bottle. Print instructions It can be printed with…
![Nalgene bottle cap strap replacement [TPU]](https://media.printables.com/media/prints/572942/images/4581812_e997fabb-62a4-436c-8347-f2a2f2b07e31/img_20230904_085329020.jpg)
