Counting matching models…
Transport your bike without worrying about accidentally grabbing the brake lever. Modelled off the original stopper from Shimano, these are a little easier to use with an extra grab surface, and some guides to stop it wobbling around.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
These are a set of scaling callipers, designed principally for use by an artist (but with other applications) to capture the proportions of a subject. They can be used in isolation or in combination with a scaling grid. The limit of…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Edited https://creazilla.com/nodes/74126-venus-kalyppigos-3d-model Print Settings Printer: Kywoo 3D Tycoon Rafts: No Supports: Yes Infill: 15
I decided to remix @Alberto Digital Caliper Holder after a few weeks of use I noticed my caliper would slant to one-side after taking a closer look I noticed that the fine adjustment thumb wheel on my caliper was coursing the issue…
Update October 14th 2018 Added my Fusion 360 file to help the remixes. My calliper came in a box, which is not practical for storage and not easy to access, so I made this small wall mount for it, and I love it. Now it is on hand all the…
Printing information Body is cut into three parts for easier printing without supports. Just use a drop of CA glue to assemble it, or merge all parts in slicer. Like this model? Check out my other creations here:…
Vytisknuto pomocí Kywoo 3d, REGSHARE PLA, 0.4mm, detail 0.12mm.
(DE) Kompakter Zirkel für Töpfer oder Drechselarbeiten, die beiden Gelenkhälften können auch durch eine M5 Schraube mit Mutter und Beilagscheibe ersetzt werden. (EN) Compact circle/calliper for pottery or wood turning work, the two joint…
The holder fits Biltema callipers perfectly. They are however generic and identical to the one in the original make, despite being bought indifferent countries. Likely fits many brands.
I needed to measure a dimention that was inside a lip. Unfortunately I didn't have a micrometer. What I did have was a digital caliper, Fusion 360 and a 3D printer. They will clip on to most calipers you can buy on 'tinterweb (I have 3…
Wandhalter für 2 Messschieber / Wall Support for 2 calliper
Calliper for measuring your body parts when scaling helmets and other cosplay items. 300 mm span version, 50mm per division. tip.stl needs to be printed 2 times. You will need M3 screw and nut. When glueing the parts together be cautious…
I printed the model with the mounting side facing down on the build plate, using “Supports on build plate only”. --- Ich habe den Halter mit der Montageseite nach unten (auf dem Druckbett) und mit Einstellung “Stützen nur auf dem…
This is a Calipper guard to avoid scratching in calliper face, its not a big deal but could be usefull for moving by car with friends.
Simple switch that disconnects battery. Cannot be lost accidentally, unless you damage the battery connector. Checked brands: NITEO, NEIKO, TITAN
A storage system that suits a wide range of digital callipers. Compatible with the Gridfinity storage system.
This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers: Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane Pegboard 2 position blank…
A mix from https://www.thingiverse.com/thing:3085101
Calliper Holder fitting for Honeycombe K1C
Calliper ruler attachment for metal rulers that are around 1mm thick and 26.2mm wide(for the 30cm rule) 1mm thick 19..2mm wide (for the 15cm rule). celco and studymate work well any that fit those measurements will work too. A 18mm x 3mm…
Designed this pegboard mount for my calliper case(93x27.5mm), since I hold other stuff in the calliper case it made more sense to make a holder for the entire case. Based my model off this , very handy so thank you Rod!
*** NOTE HONEYCOMB ROTATED 90 DEG (SO POINT UP) THIS WILL NOT WORK IF HONEY COMB IS HORIZONTAL*** Simple holder for callipers.
I've designed this simple holder for my callipers, the most essential tool when it comes to modelling stuff to be 3D-printed, so that I can always have it at hand. It relies on gravity to hold the callipers in place and can be mounted on…
Holds 4 rulers plus your callipers. Screws onto a flat vertical surface. A not-very-elegant SolidWorks file is included for tinkering… Regards, Paul.
STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)
Remixed from @AJiang_271688's Skadis - Pittsburgh caliper holder, I prefer the Universal Hook System as it is stronger than the standard printed ones. Thankfully @AJiang_271688 supplied the STEP file, so I could remove the hooks in…
This is an acrylic laser business card that assembles into a functional set of acrylic metric/imperial callipers, with a vernier scale accurate down to 1/20th of a mm***. This file still needs some polish, but is fully functional. I was…
this model is the allip from Storm Lord's Wrath.
Hook for callipers. 5mm wide hook PETG 4x perimeter
I printed mine in Silver PETG, because that's what was on the printer. Any filament should work OK. 0.2mm layer height No supports should be necessary.
Calliper and ruler stand. If you can measure it you can manage it. This little stand does both for me. Printed with 3 wall loops and 10% gyroid infill.
Meet FilaGrip – the game-changer in 3D printing calibration. This hinged clip attaches seamlessly to your caliper, offering a hassle-free solution for precise filament extrusion measurement. Say goodbye to guesswork and tedious cuttings,…
Держатель штангенциркуля для перфопанели Ссылка на Перфопанель
Print it out of TPU or PETG for good layeradhesion. PLA is maybe to brittle. Click and fit mechanism. Doesn't fall off on its own. Happy printing :)
I have two of these cheap, metal, unbranded Vernier callipers, and wanted to create a Gridfinity holder for both, plus 4 batteries. Instead of wasting a print on someone else's design that doesn't fit this model, I decided to waste about…
150mm Electronic Vernier Callipers Storage Case. The fit allows adding a felt layer that finished it off beautifully.
Use Base Single Hole Mount to attachment this mod
I always store my caliper in its case, which is conveniently held under my desk by a specially designed holder. The measurements of the calliper case are 240 x 88 x 20mm, and the holder is 220mm to facilitate easy retrieval. Featuring a…
Vernier Callipers, Gridfinity bin These should fit most callipers but for reference mine are: Moore & Wright 110-15DBL There are loads of bins for callipers. Unfortunately none of them were suitable for my bin, so I made my own. These…
Bought a generic Brake Calliper Rewind tool supposed to be compatible with Ford models. Pins on the adapter (2 options) were both too far apart. This is an adapter plater for pins 20mm apart centre to centre. The Halfords near me, only…
This is a simple remix of the already remixed universal mount for callipers to add on the connectors for the pinnacle pegboard sold at bunnings in australia. should also fit other pegboards that are 25mm between hole centres (6mm holes).…
simple wall mount solution for 2 sets of callipers why two i keep some plastic and one metal for electronics and precision links for callipers and mounting hardware for this project https://tinyurl.com/5tz32uyb…
Improved caliper holder. Note: My print on the image is not so good. I changed the slicer and I'm still configuring it.
Remix of the model by Tantalus to attach with magnets size 10x2. I added a lot of placeholders for magnets, depending on the attachment plane, decide how many to use.
Just do it and stick with 2side adhesive. Done.
Most of these callipers tend to drain batteries when not in use, I'm forever replacing the batteries even if I havent used it since the last time! Saw a few designs of a battery saver that essentially disconnects the battery but all the…
Jedná se o držák/krytku baterie do digitálního posuvného měřítka Senator SEN-331-1230K. Tisknuto z materiálu PLA s podporami.
Basic external calliper - print two - add bolt and nut - measure away... It's not a super accurate precision measuring tool, but then you knew that...
This is just a quick remix of a remix of the Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane I updated a 3rd version to add some more clearance for the head of the screw used to install it…
I needed a mount for my calliper on my Sapphire Plus printer, so i designed this one. No screws needed, just clip on.
Introduction Yeah, I know. You are not as stupid as me by pressing the brake pedal when the calliper was not mounted. And that's not the reason the cilinder came out of it, right? But still, you do have the same problem: you need to get…
I design and made with PLA. Calliper was a really different geometry for storage.
A simple mount for mounting my DML callipers to my monitor shelf. Uses three parts, a universal clamp, a screw, and the mount. I also used a little bit of adhesive rubber to add some friction. The angle is a nice 30 degrees. While this is…
Designed myself in fusion 360. QIDI text is raised so a pause can be added at layer 259 for color change if wanted. Supports are required. I printed with the QIDI logo up and used tree suports with no issues. Please like, rate and share…
Greetings to those who have gone before.
Resizing To resize the model for your callipers open the FreeCAD document, go to the spreadsheet and update the values to the next nearest .5 of a mm (you can add some extra clearance if you want at this point). Then you can export the…
For measuring smaller radiants with my calliper I designed this adaptor. Just align both axles to the radiant and measure the distance to the radiant with the thorn. The distance needs to be reduced by 10mm. For use in CAD tools.
Simple calliper wall mount, uses two small screws.
If you like my model, please be so kind as to upload your own and I would be happy if you would rate it too.
Calliper Holder for 2020 Frames, to get a little more order on my tables. Printed in PETG.
I create this thing to protect the buttons in my toolbox. Sometimes the batterie gets empty by switch the clipper on. Diese Abdeckung schützt die Tasten des Messchiebers vor ungewollter Betätigung in meiner Werkzeugkiste und damit vor…
A very simple calliper holder to hold lightweight vernier callipers. This was modelled off a set of Craftright callipers and is designed to be used with two 8x3mm neodymium magnets. Note that with magnets, this is NOT strong enough to…
Serviced my bike, needed to wind the callipers in. Created a tool with 20mm spacing to allow insertion of two allen (hex) keys, which are secured with 8 nuts and grub screws..
This is a Gridfinity Calliper holder. It can be used with the gridfinity type magnets. If you don't have the exact calliper as me, I recommend checking out the exact dimensions and do modifications in the fusion file or on the STL if…
I designed it to hold the calliper box in my wall, print 2 pieces and use double sided tape or 3m command strips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 10% Category: Tool…
Small, sleek Mitutoyo Calliper Desk Mount Hardware: 2x Size 6 Button Head Screws (or use a screw that has a head < 7.5mm, through hole < 4mm) Prints with the text up, Supports are required.
Removed the buttons from the original design and wanted to try without the caliper segment
Print at a really high resolution. It needs to be precise for the numbers to show up well and the locking mechanism to work
Ever wanted a accurate way to measure things. Well now you do. This clip on calliper slides effortlessly along rulers (some rulers may not work for size differences. rulers that will work will be linked).. You can use glue to hold the cap…
Slots into a 3030 frame. Print with supports with the 3030 slot on build plate. Hole cut out is just for less material usage, Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15 Category: 3D Printer Accessories
Two small brackets that hold my digital callipers to my printer. The front bracket lock the callipers in place so it cant slide forwards or backwards. Very simple but does the job. Print Settings Printer Brand: MakerBot Printer: MakerBot…
wanted to mount it on the side to hold all three items together. Original Calliper ( https://makerworld.com/en/models/629 ), but made the opening bigger to fit mine, and the tube to hold the nozzle cleaners is for 12mm tubes ( with .2mm…
3D Printed 2-Part Manual Caliper – 100mm & 150mm Versions A simple, affordable and surprisingly accurate measuring tool designed for everyday workshop jobs, engineering tasks and classroom use. I wanted to make something cheap, practical…
I split it already for smaller printers, or you can use the full model. I further customised it by adding slots for easier gripping, and slots for batteries. This was done using negative modifiers. I tried including it, but the slicer was…
For measuring smaller radiants with my calliper I designed this adaptor. Just align both axles to the radiant and measure the distance to the radiant with the thorn. The distance needs to be reduced by 10mm. For use in CAD tools.
STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)
150mm Electronic Vernier Callipers Storage Case. The fit allows adding a felt layer that finished it off beautifully.
These models allow you to mount a gopro or gopro alternative to your bike, on either the handlebars stem or brake calliper using a zip tie type method. No support Generation Required. Print in Place. Print in PETG
