Parametric Calliper Box Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of another design that I thought could do with some fillets and an easier way to change the size.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Resizing
To resize the model for your callipers open the FreeCAD document, go to the spreadsheet and update the values to the next nearest .5 of a mm (you can add some extra clearance if you want at this point). Then you can export the model of the correct size.
You can also change values such as the wall thickness (default is 5mm) and the size of the screws you want to use (default is 3.5mm).
The size I have uploaded is for the Mitutoyo 6 inch callipers that has a box depth of (roughly) 116mm and a box height of 36mm.
Exporting & Slicing
To export, click on the part in the timeline on the left, then go to ‘Mesh’ in the dropdown at the top, then ‘create mesh from shape’. Then click on the meshed shape in the timeline and File>export
Then to get the right side just dupe and flip it in your slicer.
Printing
Just print it in the same orientation that its imported as, no supports should be needed.