Search results: amat

Sort order

416 models

P
PrintablesKB2QQM

Amateur Radio so-239 Bulkhead Inlet Mount

Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
8
Rating
0
P
PrintablesF3DX

Motorcycle registration holder for Spanish plate - Portamatrículas de moto

Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
10
Rating
0
P
Printablesthiebes

Mount for Hamamatsu Avalanche Photodiode (APD) C10508-01 with Voronoi vents

This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Downloads
73,263
Likes
11,287
Rating
4.85
P
PrintablesMZ4250

Tiamat

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
6,152
Likes
605
Rating
4.92
P
PrintablesKYZ Design

PASTA lite Receiver - a Pastamatic Remix

Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…

Downloads
4,977
Likes
655
Rating
4.79
P
Printablesschiko

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…

Downloads
3,505
Likes
291
Rating
4.98
P
PrintablesGekoPrime
Downloads
2,941
Likes
251
Rating
4.97
P
Printablesmendieselnco

Pastamatic - 37 mm motor mount remix

Created an enclosure for the 37mm motor mount used in GekoPrime's original motor mount remix. Added mounts for a DC controller and 12v power supply. Parts list: 37mm motor -…

Downloads
2,397
Likes
190
Rating
4.82
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Downloads
2,390
Likes
262
Rating
4.89
P
PrintablesGekoPrime

Pastamatic - 37 mm motor mount

This is an barely tested mockup, it seems to work fine but I haven’t run a full spool through it Here’s a link to the motor. I used 8mm m3 screws. https://www.amazon.com/Greartisan-Electric-Reduction-Centric-Diameter/dp/B08D3SSG55/ I…

Downloads
1,931
Likes
209
Rating
4.8
P
PrintablesMakerDavid3d

Fishing Hook Remover Disgorge Slamatore 3 MODELS

Fishing Hook Remover Disgorge Slamatore 3 MODELS FISHING DISCHARGER

Downloads
1,816
Likes
270
Rating
5
P
PrintablesDMM_Raptor_Dude

Pastamatic .3mf Including Several Remixes

I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…

Downloads
1,784
Likes
151
Rating
4.91
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Downloads
1,753
Likes
222
Rating
5
P
PrintablesdE3OB2

Hand Crank for the Pastamatic

Hand Crank for the Pastamatic Manual crank for the Pastamatic Filament Spool Winder Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c…

Downloads
1,115
Likes
96
Rating
4.9
P
PrintablesMZ4250

TIAMAT! Totally not a bunch of Wyrmlings in a Trench Coat.. nope!

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,072
Likes
244
Rating
5
P
PrintablesMZ4250

Bahamut & Tiamat in Humanoid Forms

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,069
Likes
101
Rating
0
P
Printables3Dlife

Short source cradle for Pastamatic - Filament Spool Winder

The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.

Downloads
972
Likes
126
Rating
4.67
P
PrintablesAlan Duggan

IJN Japanese Battleship Yamato

IJN Japanese Battleship Yamato from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.

Downloads
910
Likes
41
Rating
5
P
PrintablesTritschi

Remodel of Pastamatic - Filament Spool Winder for Bambu Lab and Others

EDIT 02-Sep-2025 : New revised motorized and furthermore engineered version published: https://www.printables.com/model/1398207-re-remodel-of-pastamatic-filament-spool-winder-for EDIT 20-Aug-2025: in a couple of days there will be a new…

Downloads
907
Likes
213
Rating
0
P
PrintablesGekoPrime

Pastamatic - shim to allow the use of spools with 70mm ID

To do: Change spool_max_ID in the main project so this shim isn’t required

Downloads
830
Likes
78
Rating
5
P
Printablesschiko

Clamp for Pastamatic Spool Winder (to fix on a board)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … You need 4 of them and a wood board (mine will be…

Downloads
802
Likes
92
Rating
5
P
PrintablesTritschi

Remodel of Pastamatic - Filament Spool Winder for Bambu Lab and Others

Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…

Downloads
782
Likes
261
Rating
5
P
PrintablesTom Cichowicz

Pastamatic - 37 mm motor mount (enclosure)

Speed Control DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B NEW Drive Gear The NEW drive gear that has a closer tolerance for a press or tighter fit to the motor shaft. Spindle retainer…

Downloads
771
Likes
93
Rating
4.5
P
Printablesmaxelman

Pastamatic Manual Hand Crank / Handle

Print in place rotating handle allows a tight grip, it rotates in your hand.

Downloads
760
Likes
50
Rating
5
P
PrintablesCerialPhreak

Pastamatic PETG wiper blades

Bendy PETG wiper blades for Pastamatic

Downloads
756
Likes
80
Rating
5
P
PrintablesVK1HF

BaMaKey TP-iii / TP-3 paddle holder - BaMaTech - Mk2

A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There…

Downloads
729
Likes
32
Rating
4.75
P
PrintablesMWinkel

Adapter rings for Pastamatic Spool Winder (83mm ID)

Adapter rings that allow the use of spools with up to 83 mm inner diameter [Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS]

Downloads
714
Likes
71
Rating
4.86
P
PrintablesNeil J Borja

Pastamatic Extra Clearance Wiper Mounts

This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…

Downloads
670
Likes
86
Rating
4.92
P
PrintablesDarjanator

Exclamation mark spinning top

A spinning top that creates an illusion of a floating exclamation mark when spun. Dimensions: Width: 85mm Height: 50mm

Downloads
626
Likes
56
Rating
4.75
P
PrintablesFilip Zítko

Auxetic structure | Metamaterial

Prototype of Auxetic metamaterial which I made to demonstrate how auxetic metamaterials work. The rectangle sample works well, but the star sample needs to be printed from flexible material. Auxetic material If you pull on the auxetic…

Downloads
583
Likes
24
Rating
0
P
Printableslanggore

pastamatic leadscrew with added bearing

had issues with the leadscrew binding so i added a place to add an extra bearing

Downloads
577
Likes
41
Rating
4.43
P
Printableskevinclark

Extended donor spindle for Pastamatic Winder

The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.

Downloads
519
Likes
44
Rating
5
P
PrintablesAdam Storm

FilamATrix TZ V6 2.0 Hotend Mount

The FilamATrix toolhead is great, but the Dragon HF mount just let too much air blow across the heat block of the TZ V6. I remixed the geometry of the Stealthburner mount from Citywrecker and combined it with the Dragon HF duct from…

Downloads
491
Likes
68
Rating
5
P
PrintablesYardboy

TPU Wiper for Pastamatic

We could not get the TPU wiper to slide into the slot more than half an inch. Shaved a bit off the bottom bulb diameter, now slides in snugly.

Downloads
485
Likes
39
Rating
5
P
PrintablesPittRBM

Amatsu (Amatsumagatsuchi)

Amatsu AKA Amatsumagatsuchi from Monster Hunter Generations Ultimate Category: Creatures

Downloads
466
Likes
37
Rating
5
P
PrintablesLizzB

Pastamatic with Manual Crank

Added a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works. Requires supports in the gap where the spindle meets handle Crank handle was taken from…

Downloads
460
Likes
87
Rating
4.75
P
Printablesvikingbrent

Leadscrew pin retainer for Pastamatic

I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…

Downloads
430
Likes
36
Rating
5
P
PrintablesRon McDavid

Pastamatic Stabilizer Bracket

These simple brackets allow side rails to be screwed down in a permanent position. Printed with PLA, I used 50% infill for addition strength. I just glued to side rails. but they could be bolted to rails. I added four, one in each corner.

Downloads
424
Likes
54
Rating
5
P
Printablesm0larMechanic

Pastamatic Pins with Cotter Pins

These cotter pins were a came changer for me. I was having pin vibrating out while in use before. Now they are locked in! Edit: Made a long pin with the hole moved closer to the tip if you wanted to use the clip mod for the drive spindle.

Downloads
419
Likes
64
Rating
4.89
P
PrintablesC4 Designs

Amateur Radio Dipole Antenna, Guy Rope Winder

Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…

Downloads
398
Likes
82
Rating
5
P
PrintablesMZ4250

Tiamat Necklace

Use hobby store chains for this. Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me…

Downloads
398
Likes
116
Rating
5
P
PrintablesBenBigBeard

Harry Potter Proclamations - customisable via top insert for wall or Xmas tree decoration

Here we have a customisable proclamation display, as seen in the Harry Potter series these can be mounted on the wall via nail and chain, or command strip. They can also be used as Xmas tree decorations the key part, is they are…

Downloads
393
Likes
136
Rating
5
P
Printablesbapski

Pastamatic - Filament Spool Winder with screws for more stability.

also got this idea from https://www.printables.com/@Leo_1098206. i however don't have or can't find a 2.5kg spool which his what his particular remix is for. 5mm countersunk screws should fit fine.

Downloads
390
Likes
33
Rating
4.67
P
PrintablesthoperSought

easy hand crank for Pastamatic

hand crank for pastamatic a spool of bambu filament got away from my sister, and now needs to be respooled. she wanted a hand crank, so I designed this one. in particular, I wanted it to be easy to print and not require any extra hardware…

Downloads
383
Likes
49
Rating
4.67
P
Printablespingu

Pastamatic Leadscrews for 60mm and 80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament)

60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…

Downloads
381
Likes
35
Rating
5
P
PrintablesROLS733

30mm Spacer for Pastamatic Filament Spool Winder Spindle

for slim spools like the old Makerbot spools.

Downloads
357
Likes
39
Rating
5
P
Printablesvvzvlad

Alternative spool holder for Pastamatic

The "x2" in the file name refers to the number of printed parts. Depending on whether the coil is receiving or giving coil, you have to insert the corresponding adapter (with or without teeth), and glue it in (I use super glue for gluing…

Downloads
356
Likes
33
Rating
5
P
PrintablesBG5UTE

Pastamatic axle holder

有效防止使用双电机MOD时,卷线时的跳轴的现象 机翻:Effectively prevent gear runout during operation when used the dual motor mod Hardware: 1X 608ZZbearing 1X M5X35Scerw and nut 2x M6X50Scerw

Downloads
349
Likes
42
Rating
5
P
PrintablesNindrene

Pastamatic Remix with 1kg and 5kg Spool Holders

Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…

Downloads
346
Likes
24
Rating
5
P
Printablesdgardner

Amateur Radio Mini Dipole Antenna

Very small dipole antenna. Great for backpacking, POTA, SOTA, etc. Three different base connectors for SMA, BNC and SO239 connectors. Connect 2 lengths of wire to the base and clip on the connector. Search the Internet for “Dipole…

Downloads
344
Likes
83
Rating
5
P
PrintablesWoodenspoke

Pastamatic Axle Brake- no TPU no Blocks- To transfer filament from one roll to another.

I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the…

Downloads
340
Likes
21
Rating
4.75
P
Printableswilly.is.making

Pastamatic Notched Pins and C-Clips

These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…

Downloads
334
Likes
35
Rating
4.86
P
PrintablesJan B

Sunlu spool adapter for Pastamatic donor spindle

This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).

Downloads
332
Likes
22
Rating
4
P
PrintablesJura Švébiš

Dramatic Exit Sign

Dramatic Exit Sign

Downloads
331
Likes
56
Rating
4.33
P
PrintablesTom Cichowicz

Pastamatic Filament Winder - Flush Pins

Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)

Downloads
331
Likes
57
Rating
0

IJN Yamato battleship turret flash drive storage for desktop, 戦艦大和 USBメモリー、ストレージ

Print the turret facing upwards, vertically. Use adaptive infill to make the barrels and blast bags portions 100% infill. You will need a lot of support for the turret, so use a support brim. No support is needed for the storage barbette.…

Downloads
311
Likes
30
Rating
5
P
PrintablesScott Baron

Stealthburner Orbiter 2.0 FilamATrix with Orbiter Smart Sensor

A mount for the Orbiter 2.0 extruder for the FilamAtrix toolhead cutter (note the A in mAtrix) recommended for the BoxTurtle MMU from Armored Turtle. I remixed the Stealthburner Orbiter 2 mod and the model for the Orbiter Smart Sensor for…

Downloads
307
Likes
60
Rating
4.67
P
PrintablesTom Cichowicz

Pastamatic - Reinforced Main Drive Spindle

Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.

Downloads
302
Likes
31
Rating
5
P
PrintablesPhilip Brady

Pastamatic Retention Clip Set

This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…

Downloads
300
Likes
30
Rating
5
P
PrintablesJan B

Pastamatic Leadscrew and winder spindle for 50mm wide Sunlu spools

This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.

Downloads
297
Likes
31
Rating
4.25
P
PrintablesKistek

Pastamatic Spindle Retention by Kistek

Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…

Downloads
297
Likes
43
Rating
4.5
P
PrintablesSiff3D

Pastamatic Driving Shaft - Reinforced

The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin. So, I created a remix, which has a reinforced screw and the "top" end of the…

Downloads
293
Likes
28
Rating
5
P
PrintablesTurtleCreations

Leadscrew 45 mm for Pastamatic

Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.

Downloads
284
Likes
34
Rating
5
P
Printablesvvzvlad

JGY370 motor Pastamatic

You'll need: 1)Motor+controller (12V/375rpm and package C): https://aliexpress.ru/item/1005002607864635.html For russian region:…

Downloads
281
Likes
54
Rating
4
P
Printablesk0nnk

Antenna Wire Winder/Insulator for ham radio / amateur radio

This is a simple wire winder or/and antenna insulator for ham radio. I would scale 150%-220% You can purchase this for $5 + shipping ($5-8) if you email [email protected]

Downloads
268
Likes
35
Rating
3
P
PrintablesChris Turnbull

2020 Crossbar Remix for Pastamatic Filament Spool Winder

Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…

Downloads
263
Likes
27
Rating
3
P
Printablesrvaccaro
18+

The source marked this model as adult content.

Downloads
244
Likes
123
Rating
5
P
Printableskevman

Pastamatic dual motor mod

My single motor just didn't have enough torque when the spool was more than halfway loaded so I remixed this setup for my controller and a dual motor setup. EDIT:added step files EDIT: Use this as well…

Downloads
244
Likes
53
Rating
5
P
PrintablesLEONIDAS10009

TETRAGRAMATON

The tetragrammaton serves as protection against all kinds of evils. It acts against dark energies, being highly effective in combating the evil eye, envy or negative entities. It grants spiritual dominion over the energies of the elements…

Downloads
235
Likes
9
Rating
0
P
Printableskevman

Pastamatic winder power motor remixed for different controller

Remixed the enclosure for a different motor controller https://www.amazon.com/gp/product/B071H2YQG5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Downloads
230
Likes
33
Rating
4
P
PrintablesSascha

Erhöhung/Riser for Pastamatic - Filament Spool Winder

Erhöhung um 20mm um DasFilament Spulen mit 2,6KG zu verwenden

Downloads
228
Likes
35
Rating
5
P
PrintablesMonster Atlas

Blue Abishai — Devil Servant of Tiamat | Free STL | D&D 5e Miniature

Hey everyone, here's a free Green Hag Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out free for the community. Whether you're a DM building an encounter or a…

Downloads
227
Likes
18
Rating
0
P
PrintablesArizwe

Calaklum class battleship model (Gatlantis) (Space battleship yamato)

Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…

Downloads
219
Likes
23
Rating
0
P
PrintablesRon McDavid

Pastamatic Wiper Spacer

Spool tension wipers kept sliding back, with these spacers you can set tension. printed with PLA, 5% infill 12/4 Added taller version for better support

Downloads
217
Likes
29
Rating
5
P
PrintablesXboxHacker

Pastamatic Remix: 5Kg to 5Kg Spool Winder

This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…

Downloads
216
Likes
21
Rating
0
P
Printablesdanio_298

SB2209 Large Gear Clockwork2 HGX (and FilamATrix alpha version)

A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…

Downloads
210
Likes
27
Rating
4.5
P
PrintablesMonsoonJosh3D

ARRL (Amateur Radio Relay League) Logo Keychain

Hello everyone this Josh WX7JM, I have been into ham radio since 2014 and I created this logo way back in 2015 and now I bring the fun here to Printables. I created this fun ARRL logo key-chain for any ham to print on their printer. Now…

Downloads
205
Likes
17
Rating
0
P
Printablesdgardner

Amateur Radio RF Adapter Storage

It's amazing how quickly you can accumulate stuff sometimes. I have a plethura of adapters that I use in amateur radio to couple various antennas and radios. I carry them and use them when helping friends. It go out of hand so I made…

Downloads
203
Likes
48
Rating
0
P
Printablesdotvav

Pastamatic - Filament Spool Winder - Larger Spool Cradle Arm

This is a remix of Pastamatic's filament spool winder that I have adapted for a taller/larger source spool. I wanted to be able to fit my 2.2 kg spool that has a 300 mm diameter. Replace the 2x source cradles with 2 of this. Apologies, I…

Downloads
202
Likes
24
Rating
5
P
Printablestomvdb

Amateur Radio Station Callsign Display

Most amateurs put up a callsign display in their shack. I thought it was a bit boring so I designed something more fun! Its almost turning into a amateur radio playset ;) The base is a simple enclosure which you can modify to add your…

Downloads
200
Likes
21
Rating
0
P
Printablespropellerhead

Sotabeam Travel Mast Guy Collars 22mm and 34mm ( amateur ham radio )

These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…

Downloads
199
Likes
34
Rating
0
P
PrintablesBernt

3030 Crossbar Remix for Pastamatic Filament Spool Winder

Stl:s now with mounts for 3030 rails…

Downloads
197
Likes
24
Rating
5
P
PrintablesJoon Chor

Pastamatic - retention clips - easy open finger tabs - normal and drive side clips

The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle

Downloads
193
Likes
20
Rating
5
P
PrintablesKoos

Pastamatic - main spindle with 8mm socket

Same spindle, stronger socket.

Downloads
191
Likes
18
Rating
5
P
PrintablesGekoPrime

Pastamatic - Alternate Source Spool Holder

Work in progress, don't expect this to work without modification Post a comment if you see a better way to do this. The idea is to spread friction across the entire surface of the spool so it doesn’t saw through the PLA as quickly. With…

Downloads
187
Likes
46
Rating
0
P
PrintablesWireheadarts

Paramaterized Honeycomb Storage Wall Ruler (or other long rectangular object) holder

There's some hooks out there that are designed for the hook hole that you get in the end of straightedges, but I wanted something that's more of a slot, so this idea popped out of my head. Basically, there's two pieces to this, you print…

Downloads
187
Likes
46
Rating
5
P
PrintablesMakerMylo

Filamatrix Stealthburner Filament Cutting Servo Mount (MG996R) ERCF v2

This allows the fitting of a Servo to the stealthburner with filamatrix filament cutter to automate the cutting, it's designed to mount to the original cable bridge holes and the cable bridge included is that of the EBB Stealthburner…

Downloads
187
Likes
41
Rating
5
P
Printablesdgardner

Amateur Radio Morse Code Paddle / CW Key

Great design for a 3D paddle with just a few modifications including: Added side walls to the base to prevent accidental keying Rounded the base bottom for a better feel Added screw holes to bottom to facilitate additional stuff Created a…

Downloads
186
Likes
45
Rating
5
P
Printables3DGuru

Male Spindle with 3/8 inch socket screw for Pastamatic

I created a square with 9.7 mm. Perhaps it could be made a bit tighter.

Downloads
175
Likes
13
Rating
0
P
Printablesdgardner

Amateur Radio Retevis RT95 50 Cal Go Box

Mounts a Retevis RT95 25 watt Dual Band VHF/UHF radio in a metal 50 caliber ammo box with batteries and an antenna. It is a totally self-contained high watt go-kit. Features include: Fits four 6Ah LiFePo batteries for a total of 24Ah of…

Downloads
172
Likes
45
Rating
0
P
PrintablesTheRealSullyG

Otamatone Baseball Cap

Give your Otamatone some style with this 3D printed baseball cap! Includes a "universal holder" to clip the hat to the stem of your Otamatone, ensuring it stays in place! Fits on all classic-sized Otamatones

Downloads
172
Likes
13
Rating
0
P
PrintablesPreston Hall

Pastamatic Hand Crank

Expect a snug fit on the drill bit, especially with PETG.

Downloads
171
Likes
14
Rating
0
P
PrintablesSonja

Spool Adapter for Pastamatic up to 85mm Hole Diameter

I have had the problem, that some of my spools had a hole Diameter up to 85mm which causes the normal pastamatic axis to slip throught this hole, so I quickly designed a adapter that enables me to respool to/from this kind of spools…

Downloads
166
Likes
8
Rating
0
P
PrintablesTheRealSullyG

Otamatone Teeth

Give your Otamatone some teeth with this simple 3D print! This is designed to fit on all classic-sized Otamatones.

Downloads
165
Likes
36
Rating
4.75
P
Printablessyclone

IJN Battleship Yamato [大和] anchor 1/16 display model

1/16 display model of the main 15 ton anchor of Imperial Japanese Navy Battleship Yamato. Glue required for assembly. The bottom part, anchors and the rod have pins to help allignment. Build list: Anchor model: anchor: 2 pieces 2 pieces…

Downloads
163
Likes
23
Rating
5
P
PrintablesJAV3D

Pastamatic spoolwinder Bosch IXO adapter mount

English Description of the 3D-Printed Adapter for the Pastamatic Spool Winder and Bosch IXO Cordless Screwdriver: This 3D-printed model is an adapter designed to connect the Pastamatic spool winder with a standard Bosch IXO cordless…

Downloads
160
Likes
36
Rating
5
P
PrintablestbkMAKER

FilamATrix Stealthburner — TZ-E3 Hotend Mount (Front + Back)

This is a Patreon requested remix of thunderkeys’ FilamATrix toolhead for Voron Stealthburner : I modified only the Front and Back hotend mounting shells so the toolhead accepts a TZ-E3-style hotend. All other FilamATrix/Stealthburner…

Downloads
157
Likes
30
Rating
5