Counting matching models…
This is a set of mini puzzle tanks inspired by Tanki Online during its golden years (2012–2015). The kit includes these classic combos: Hunter + Smoky Hornet + Railgun Viking + Thunder Each tank is designed as a flat kit-card: print it,…
this is a small dinosaur toy. it is printed flat on the print bed and then assambled. notice the litle bump orientation in the main spine. it is recommended to check out this instructions short video: no support is needed. for me the…
This is technically a remix of the Hexes for LEGO mini figures (re-modeled) by @Nat_ Although I have redesigned this in Fusion 360 from the ground up I have marked it as a remix to credit them, please note this reworked version does not…
Cover for XLR or other Neutrik D series holes in a front panel. This version is mounted from behind and does not protrude on standard rack panels. Designed in SolidWorks, source file provided. Instructions Printed on Bukobot 8 V2 Duo PLA…
This model uses a few compartments from the dummy 13 model. Supports: hands - no head - yes - please use the tree type torso - yes - doesn't matter which kind arms/legs - no feet - no PLEASE USE PETG. you dont have to but it is…
Caps off a standard UK appliance waste fitting (e.g. dishwasher, washing machine) when the outlet is no longer needed. Printed at 15% infill, 0.15mm layers, no support. I used PETG but PLA would probably be OK. I used ironing to ensure a…
I had some openings left over on a panel of the CNC controller casing, which is placed behind my milling machine. We don't want bits of metal flying in there! The “Tight” version of the files have a slightly tighter fit between the ring…
This is a spacer that maintains a 6mm gap around the outside edge when installing floating floor planking or vinyl tiles
ZÁSLEPKA ROZVADĚČE - BLANKING PLATE FOR SWITCHBOARD Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
Designed to fill the hole left behind when relocating the power switch. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** Yes Supports: Yes **Infill:** 15% Filament: Prusament PLA Galaxy Black Post-Printing =============…
Blanking plate for 120mm fan opening on a computer case. When managing air flow thru a computer case with an air filter then you likely want to blank off any unused 120mm fan openings. This design contains a groove for a seal. A string of…
I made this model to blank off a single DIN headunit slot to add switches and LED lights. It can be modified to add holes in CAD or you can drill them. I recommend 100% infill and PETG at a minimum for in-car parts. If your country is…
Just simply snaps into a rectangular hole / switch location in the dash of a Volvo 940 or 740. Photos show both original as printed part Note: Due to potential high car interior temperatures in summer time, do not print in PLA! (it will…
This one was used to blank ~18-19mm holes - you should be able to use X/Y scaling to make it fit your needs.
This modular support structure offers improved stability and guidance as your plants reach for the sky 🌼 you can add moss in the core bayonett clasp to connect multiple 60 degree fork part to build tree-like structures printing…
Prints with no supports, M3 Screws fits good, but you need a nut to Screw in, maybe I'll make a version to self tap into. New Version 2.0 adds Support for countersink Screws and m3 D-Norm Mounting Frame! It's about 2 g and takes about 20…
Fabia II interior lid, you can customize it, I used it for a phone holder. model of car holder here: https://www.printables.com/cs/model/479566-holder-for-fabia-2-with-magsafe-support part number in the skoda catalog: 5J1 858 178 B 9B9…
🦖 Cute Little Triceratops – FRANKIE (cartoon, noAMS) This adorable triceratops named FRANKIE, with its big cartoon eyes and soft rounded features, is perfect as a desk decoration, a gift for dinosaur lovers, or a playful accessory for a…
We lost all but one of the cards for our Monopoly Electronic Banking game. I printed new cards for players 1 - 4. If anyone needs players 5 or 6 let me know and I can add those also.
UPDATE: I have uploaded two new versions of the brackets. Both are based off of technical drawings rather than my hand measurements (which were still pretty close). One design is using a screw slot, and the other is using a plain hole.…
SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…
A popular upgrade in VW Caddy's is to run the Touran centre console with armrest. I have done this to my Caddy but the console I received had no rear vents and I have no use for them as there are no rear seats. I made this very simple…
this is a 19" 1u blanking plate for your rack , I manly designed it for mounting other equipment in the rack that's also why it has the reinforcement on the back site you can bolt it together whit some nuts and bolts (m4). no supports…
If - like me - you assumed the rear fan cutout was for the HEPA filter kit and went straight ahead and popped that PETG panel out on your enclosure, you'll be left with a big old hexagonal hole in your rear panel, which somewhat defeats…
Land Rover Defender 1998 Ashtray Blanking Plate Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Polymaker Polyflex PETG Black Notes: Land Rover Defender 1998 Ashtray…
Print in PETG 0.3mm layerheight.
Schlüssel zum Öffnen der Revisionsöffnung am Frischwassertank im Camper Wohnmobil Wohnwagen
The printing of the tank tracks should be with supports, in the model the hull and cannon are not connected in any way, to fix it I recommend to drill a hole and insert a rod, the model is a part of the game Tanki Online and was…
this is a 19" 1u ventilated blanking plate for your rack Don't use it with something heavy mounted to the other side it is to flexible to hold it at least with commen materials If u need a stronger version look at the reinforded moddel no…
Wanting to add some custom plugs/sockets/displays to our trailer's C-Line/CBE power outlets, I found a few models for the faceplates themselves and one with a 29mm hole in the middle, but no model of the blanking plate on its own. So here…
I converted my garage tilting door with an motorised door opener and removed the old manual door handle (to get better clearance). This blanking plate design fills the hole in the door panel. The centre plug is 35mm long with a 4mm hole…
This container is basically a remix of the container by nicolas95 but with 4 sides. Also the bottom is a separate print.
meet Frankie the frog if you have problems with dark colors showing through ie black vs any other color ive found that you can get round it by upping your infill above 50% i have mine now set to 60% which tbh hardly uses any more filament…
I liked Cameron's design for a cover panel, but needed one with a cutout matching for my choice of a thick cable going out through the side. Maybe someone else has use for it. The opening was made to fit a twice isolated RKXB, 2x1.5mm2…
Add supports, printed with Esun PLA
Whilst I don't recommend using the Pets at Home Wire Hamster and Mouse Cage full time as they are small, they are great for Hospital cages or introduction cages due to being so cheap new or even free second-hand.. We needed to block off…
DIN rail mountable blanking plate to fit most standard consumer units, used to fill unused ways in consumer units. 35mm DIN Rail Mountable Clips into Place Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Migrating from thingiverse https://www.thingiverse.com/thing:3989346 the blanking plate in my breakerbox / switchboard / meter box was getting old, and breaking apart. design this replacement for them, the default Switchboard Breakerboard…
A low profile blanking plate for UK electrical boxes. You can scale the Z dimension in your slicer if you need a thicker plate. Please note, this plate does not provide any electrical isolation, it is for cosmetic purposes only.
Simple single and double UK backbone blanking plugs. These have finger holes for convenient removal and fit snugly inside ‘standard’ UK back boxes (or at least the job lot of LAP ones I have been using, your milage may vary). Created…
This is a remix from https://www.thingiverse.com/thing:4272270 compatible with the Juwel RIO 450 Aquarium. Added 6mm holes (e.g. for dosing) Dosing tube mount: https://www.prusaprinters.org/prints/138993
This is a remix of crate and bottles from 'Badger' at https://www.thingiverse.com/thing:21819 with Vectors cube from VectorBits.uk at https://vectorbits.uk/vector-3d-printed-cube-stl-files/ (this site is not currently up). I also added…
This is a clean, simple, and functional 1U 10-inch mini rack blanking plate (also known as a spacer or blind plate). If you run a compact home lab, network closet, or desktop mini-rack, this plate easily covers empty 1U slots to clean up…
Lighted charger logo for Anki Vector Assembled with a little bit of glue Print Settings Printer: Flux capacitor Rafts: No Supports: No Resolution: 0.2 mm Infill: 25% Filament: FiloAlfa Pla Category: Robotics
Frankish Heavy-Armored Foot Soldier, Late 8th Century
alternative to EATON M22-B Blanking plug / M22-B Blindverschluss 15mm long thread / 15 mm langes Gewinde diameter / Durchmesser = 30 mm no support !!! Not waterproof / nicht Wasserdicht !!! !!! please observe your regulations for…
An upgradable / customizable playground for the two Anki Cozmo and Vector robots. Nothing fancy ; just print and connect. Connector slopes are used to avoid printing full center plates. Print Settings Printer Brand: Creality Printer:…
Please click ❤LIKE❤ if you appreciate my work 😊 Give your Monopoly Super Electronic Banking game a brand-new dimension! Instead of abstract cards or tokens, now you can physically see your investments on the board. This set includes: 🏢 7…
A simple marker carrier for the Anki Vector robot, suitable for people who want to use Vector as a physical "logo turtle" through his API. I'm not aware of any software that would enable that, but if I find or write any I'll post links…
We love Monopoly and the Electronic Banking Edition from 2007 was one our favorite editions. But the dog got to it. Yeah, that didn't go well. So I had to make a replacement and figured may as well get the whole set done and identified in…
Vectomi - created from vector 3D cube and Ortomi You need a Ortomi in here . The shipping is a little slow, it took a month to reach me though. You also need: 8x 3x2 magnet (diameter: 3mm, height: 2mm) (you can use glue instead) Glue For…
For best results print with logo facing up, with supports, and ironing enabled, the back side will be rough but will be hidden when installed. 40% or higher infill recommended
This is a wall blanking plate for a Google Nest Thermostat version 3. It covers the hole and wires that are left exposed after the thermostat has been removed (to be moved to the desk stand for example). The plate is a friction push fit…
This model is a blanking plate which covers the hole left when you remove the paddle shifters from a steering wheel for a BMW F32 (and other models). My friend has a manual car but bought this wheel which includes paddle shifters. These…
A blank 1U panel for your mini rack. Width of the panel is 252.5mm, so it fits and prints on a 255mm bed (the one in the photo was printed on a Bambu P1S). Tested the fit with DeskPi Rackmate 10" mini racks.
Githyanki | Free STL | D&D 5e Miniature Hey everyone, here's a free Githyanki Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out free for the community.…
progam:blender site:sketchfab convert:online 3d viewer
A collection of blanking plugs, bushing, locknuts and washers. Blanking Plugs: for blocking off holes in metal trunking, panels or equipment racks. Plain circular with screwdriver slots (BPP) or hexagonal (BPH). Bushing: for routing a…
Easy and cheap to print blanking plates for DBA rack panels.
My new 9V guitar pedal power supply came with 2 extra outputs at 12v and 18v. So to prevent an expensive accident I've created these simple blanking plugs so plugging into them becomes a deliberate decision. Category: Tools
These blanking plates are for filling the small gaps between the front intake fans. Screwholes need to be tapped with an M4 tap. May work for other cases, as the distance between holes is the standard 105mm which is used with 120mm fans.…
This is a CD player blanking plate for ND generation Mazda Miatas.
Blanking Plug / Verschlussstopfen, Blindstopfen / Anpassbares / Customizable OpenSCAD- Script → Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height → 20 - 20% infill → TPU
Needs two M3x15mm screws. Print with flat face on bed.
A little garage for your cozmo or vector
With 80mm fan and kettle plug mount.
Replacement rear wheel cap for Anki cosmo robot. My son somehow lost it and it is the only thing that holds the tread on. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Blanking Plate Blanking plate designed for those that hide a wireless CarPlay/AndroidAuto adaptor behind the dash, or relocate the USB port. USB-C Panel Mount Using a wireless CarPlay adaptor that has a power passthrough port? Use this…
This Radio blanking plate is based my other model https://www.printables.com/model/1249402-mini-cooper-r50-r52-r53-flat-radio-dash-kit Print with at least 20% infill. Things left to do - make both sides symmetrical.
I recommend the PEX version as it has a better seal against water leaks and PEX is available at most hardware stores for less than the stainless tube. Gaggia Classic Pro funnel (no support) PEX tubing version All versions use the original…
Another Tool holder for my Electric Screwdriver. This one is a Horizontal version. I also have a Vertical one, in my profile. This one fits 16mm deameter ones. It also has a slot, to grad the screwdriver easier
Endcap which I was using for close 32mm hose during the building of my irrigation system to not let any dirt/dust inside.
It is recommended to print the parts with a layer height of 0.1 mm so that the threads can be printed more precisely. Otherwise the threads could get stuck. ⬇
1U Voronoi Blanking Plate for 10" server rack
This is a simple snug fit/snap in holder for the Alphatronics TV/sat remote and a ChromeCast4 remote. This TV is used in Frankia motorhomes - probably other places too. Blank back to simplify mounting to wall or under cupboard surface…
Blanking plate with holes for 5 Carling/ARB switches. Also incudes model with no holes. May redo as the ARB switches seem a bit smaller than the cheap ebay knockoffs I bought. I don't have a stereo just use an amp with bluetooth.
Born for battle. Trained to survive it. This Female Githyanki Fighter is a fierce martial warrior built around discipline, aggression, and mastery of the greatsword. Armed with a massive two-handed blade, she stands ready for battle in…
This lens cap holder can be used either with magnets, or with a latch system pushed by a spring. Its small and very convenient. Glue an adapter to any lens cap, slide it into the lens holder and push on the latch to take the lens out. My…
Keeping dirt, debris and moisture out of your A/C compressor (and A/C system in general) is very important. If you don't have any suitable plugs at hand, you can 3D print your own and save some time and money (and potentially your A/C…
Cover for your Dell Optiplex if you remove the CD Player
Created this to replace the horn button on this JDM Steering Wheel: https://www.ebay.com/itm/320MM-Black-Red-PVC-JDM-Battle-Type-6-Hole-Racing-Steering-Wheel-Hub-Adapter/282388985947 This is just a blanking plate, I got a bubble sticker…
a model of a Githyanki Monk I played in a campaign. On his quest to get his close friend back he became a champion of Moander.
alternative to EATON M22-B Blanking plug / M22-B Blindverschluss 15mm long thread / 15 mm langes Gewinde edge length / Kantenlänge 30x30mm no support !!! Not waterproof / nicht Wasserdicht !!! !!! please observe your regulations for…
This is my design for the CBR250rr MC19 MC22 mirror blanking plates that i made for my track mc22. I set the infill to 40% to add extra strength when tightening the nut and bolt so it didn't tear through or crush the print.
Lightweight low profiles desk cap.
This is an alternative model of the radio blanking covers which provides a little storage.
My attempt to create a Gythyanki Fighter. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Washing Machine Blanking Cap \ Appliance Trap * UPDATE * Version 12. Thickened the walls for the screw. Thread goes throughout After doing the washing, the hose had no place to rest and would fall on the floor and cause water to leak on…
These are the plates to blank off the IACV, EGR, and Cold Start Valve on a Z31. These were designed and tested from an 88 300ZX Turbo, unknown if it fits other years or naturally aspirated cars, so do your own research. Print in PETG or…
This is a very simple mod to cover up the hole in the Voron v0 mid panel that is no longer used in the v0.1 and subsequent revisions. This uses a couple of spare M3 nuts I had in the extrusions. I have included the .step for those that…
Pin to hold stuff if you remove the rear headrest from a Toyota/Lexus I have a boot mat that mounts via the headrests in the rear and I removed them so made some pins I printed mine in PETG with support 4 of them in the gcode
I would recommend printing the model at 20% scale
Blanking plate for consumer unit (Schneider Pragma Mini) Universal blanking plate for safe covering of unused module positions in consumer units. Originally designed for Schneider Pragma boards, but also compatible with many other…
![anki cozmo /vector house hut cover [wooden cabin]]](https://media.printables.com/media/prints/969432/images/8226887_262b7d6a-80e5-48d0-953d-8c26a08cd99f_c9c2f637-7091-422a-b6e8-21f319a32b89/wood-1.png)
