Counting matching models…
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Der Adapter wird eingeklemmt und durch die Verriegelung oben fixiert. Rohrduchmesser der Klimaanlage…
Print approx. €8.00–€9.78 excl. taxPreliminary estimate for one variant
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Stand, tripod, holder for nanlite pavotube 15C 30C
Print approx. €8.17–€9.99 excl. taxPreliminary estimate for one variant
A wall holder for my Stanley FatMax staple gun. Mounts with two screws through the body of the model. Printed in PLA, infill 20, bottom down with supports everywhere because of the small overhang part. This way the holes of the model…
Print approx. €2.52–€3.07 excl. taxPreliminary estimate for one variant
Remix of Stanley SortMaster Junior (1-97-483) by @mirabatek . Enlarged version of insert box for Stanley SortMaster Junior Box (1-97-483). Print instructions: Material: PLA Filament: AURAPOL PLA 3D Filament L-EGO Yellow Layer: 0,2 mm…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Rounded version of the DHP's Stanley Box Cutter bolt, which make this great utility knife more pleasant to use.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Stanley sorting box inlays for small parts in different sizes. I use a lot of these Stanley sorting boxes . For most parts they work quiet good and their dividers often work well, but not for small and thin parts, like washers… They…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Um bei einem VW T2b eine elektrische Wasserpumpe für die Scheibenwaschanlage zu verbauen, muss am Lenkstockschalter das Ventil durch einen elektrischen Schalter ersetzt werden. Zum befestigen, benötigt man diesen Adapter. Eine genaue…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Kleines Model einer Windkraftanlage
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Dies ist eine einfache Ablage für unsere Bedienungsanleitungen einiger Küchengeräte. So bleiben die Anleitungen übersichtlich. Die Abmessungen sind 200 mm lang x 150 mm hoch x 40 mm innen (46 mm außen). Auf der Unterseite befinden sich 4…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for PETGSource material: PET
Trumpet themed name tag topper with border. I integrated this trumpet model from Thingiverse and edited the base name tag model to give it a border that also rises above the model like the name and trumpet. Made it for a friend who plays…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Ich habe dieses Projekt gedruckt : Druckvorlagen (printables.com) und dachte mit eine Wandhalterung wer für den Garten nicht schlecht, also mal Schnell was entworfen. Ich habe es in PETG gedruckt, wegen der Sonne usw. !
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
I made this blade protector for my Stanley Junior Hacksaw because I kept carrying it to university and it was always awkward to store safely in a bag or toolbox. I was constantly improvising temporary covers for the blade, so I decided to…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
My colleague retired, and I received his tool backpack. Unfortunately, the handle was broken. I couldn’t find any replacement models anywhere, so I created something that should work. So far, I haven’t been able to test it. Feel free to…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
Elevate your Stanley IceFlow Flip Straw Tumbler 20oz with our custom handle! Designed for function and convenience, this handle will help your little one hang on to their favorite delicious beverage. We know that it will be dropped at…
Print approx. €9.53–€11.65 excl. taxPreliminary estimate for one variant
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Valentines Day addition Post Malone fans check out my new Stanley topper and coasters!!! Updated 2/17/2025 I have updated the original name plates 30 & 40 oz to fit better. Also added a few more designs: Flower plate - Just like the name…
All in one: Vier Varianten meiner Industrieschlüssel - immer griffbereit Vierkant: Durchmesser ca. 6mm; Kantenlänge: 8mm Dreikant: Durchmesser ca. 6mm; Kantenlänge: 8mm Schaltschrank (ohne Mittenloch): Durchmesser ca. 8mm; Seitenkanten…
This design is an alternative version of a fast and easy 3d printable box cutter knife (see https://www.thingiverse.com/thing:3775612 ) I designed recently. It has a knife-like handle and fixes the blade at an arbitrary position with a…
Supplied models are 1:1 scale with actual Stanley Cup, so you'll want to scale it down quite a bit. Pictured model is 16%. Some supports may be desired for top model depending on the scale you choose. Model in photos is printed at 0.3mm…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
Mini stanley cups for barbies are perfectly sized by me and they fit right into the hand of a barbie. trust, your little sister will love it.
This is a direct replacement lid for 40oz Stanley The Quencher Tumbler. My wife's tumbler was knocked off the bleachers at a baseball game the other day breaking the lid. Instead of buying the $10 replacement, she ask if I could give it a…
A holder designed for Stanley razor blades to help remove 3D prints from the bed. You may also find use in removing decals, cleaning flat glass, etc. There are recesses for the blade to sit and to insert M3 nuts on the back side. Requires…
DE (EN see below): Einfaches Klicksystem um 150mm Klimaschläuche an einer Durchführung im Fenster oder einer Tür zu befestigen. Funktioniert sowohl für harte PVC-Schläuche als auch weiche Soft-Schläuche (z.b. Kaltluft-Ansaugung). Das…
A simple snack tray that fits over the top of a Stanley Tumbler (40oz). Divided into four sections with a “bridge” to sit above the tumbler's handle. Use at your own risk; special consideration should be given to food safety. Printing…
I made a cup holder for the larger style tumblers that clamps on the edge of a desk. I have seen other cup holders for these larger mugs but, they are permanently attached to the desk via screws. That is not an option for when I am at…
My wife got this gigantic Stanley Mug that would not fit in her cup holder and requested a print to “make it work”. It fits in a 2018 Q7 and is able to hold the 40oz mug upright wile driving. I printed it out of PETG at 0.2 using the…
Schitt fuer Schritt Anleitung (PDF) ein gerade verzahntes Zahnrad in FreeCAD V0.18 zu erstellen. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 mm Infill: 40%…
Under the stl file is a 3mf file for Bambu Studio. Using a site like Tinkercad, you can easily add your own words onto this. To change the text in Bambu Studio, press on the objects button, then select “text_shape”. After that, then press…
Just a simple Stanley cup that i added a oilers logo to. Looks Good!
These bins are made for the Stanley Fatmax Pro Shallow Organizer. The smaller subdivisions (4x, 6x) are not perfectly save for small parts, like washers, because of the lid design of the case. The bins need a slight print support on the…
Usage The Backbone(r) enables Handy 2 owners to use the STANLEY® MAXSTEEL® Multi-Angle Vice without having to directly clamp to the hardware. 1/4 20 (12mm long) screws are used to connect the Handy 2 to the Backbone(r). Two models have…
a cute flower straw topper for your Stanley
Replacement cap for Stanley Insulated Tumbler. Printed upright Kingroon KP3 printer IIIdmax pla+ “Space Grey” Normal supports, everywhere .16mm layer height .04mm nozzle
Somewhere to put your chapstick.
I've been using Sanlaki's gunstock design with my quest 1 for a couple of years and recently upgrades to the Quest 3. Since it has redesigned controllers, I needed to modify the original design. These fit the Quest 3 controllers and are…
Cute stitch stanley cup accessory
A simple snack tray that fits over the top of a Stanley Quencher Tumbler (30oz).
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=189264 Print instructions Category: Containers Instructions Using the following options:…
The most beautiful trophy in all of sports, the Stanley Cup. Awarded to the NHL Champions. This is a replica model I designed using both OpenSCAD and TinkerCAD. There is a one piece model that includes the base and also separate trophy…
Here is your Stanley Shot Glass!! I modeled it exactly from a 40oz Stanley cup. Scaled down to 35% and it holds a perfect 2oz. uploaded 2 versions. 1 with logo, another without. I also have a version without the handle for easier…
Stanley blade based surface scraper Uses 2x M3x12 and 2x M3 nut Designed so that if you use the flat of the 9 degree angle the blade will be juuuuuust above the surface Print instructions Category: 3D Printer Accessories
The Straw on our 30oz / 850ml Stanley cup has a diameter of 9,5mm. The model fits perfectly to our straw. I have printed mine in TPU. Let me know if you have problems or wishes.
A simple cap to cover 10mm Stanley tumbler straws. Print in TPU for flexibility.
Slot your Stanley knife neatly into your Gridfinity setup with this easy-to-print model. Includes space for up to 20 spare blades and a finger slot for easy access to the knife. Does not include magnet holes. Prints without any supports.
Ich habe hier eine Wandhalterung für WORX Akkus von ein bis vier Akkus erstellt. Der maximale Schraubenkopfdurchmesser beträgt ca. 6.7mm. ----------------------------------------------------------------------------------------------------…
Printed at .1mm layer height in PLA
Under the stl file is a 3mf file for Bambu Studio. Using a site like Tinkercad, you can easily add your own words onto this. To change the text in Bambu Studio, press on the objects button, then select “text_shape”. After that, then press…
Snug fit, have to gently work it from the top.
Simple mount to store your Stanley fatmax v20 batteries Best option is to print with support in the slot area
Airless or Beanless Hacky-Sack. --TPU - Med-Hard. Version 2: hack.obj hack.3mf. I will keep the old hackeysack.3mf up. If Someone would not mind printing in in tpu and giving the old version a try and test run with TPU that would be…
This little key chain looks like a thermal cup. I printed a Stanley logo on it but you can put any logo you want. this is printed on its side (so as to get the handle strong) with tree supports. you can also print it with no supports if…
a little boot to protect the edge of your stanley
Cute drink accessories
A replacement for the top part of a Stanley Cup (here a non-official one). There are three versions: the V1 has roughly the same dimensions as the original piece (the one in the photos), the V2 has a slightly improved design on some edges…
I made this cap to cover the straw to keep dust and particles out of my tumbler. It prints easily as oriented in the STL without supports.
I recently bought a Stanley Storage Box, and to my surprise, the drawers did not have dividers. I made those for the Stanley 1-93-980 and 1-93-981 storage boxes, which fit perfectly. There are two types of separators: for small drawers:…
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
ANL Fuse holder to match my 364396-buss-bar. I used ¼ X 20 stainless bolts I printed in PLA with 20% infill
I used PLA to print this I recommend using supports.
For all the other the basic moms that have a giant Stanley quencher and a Mockingbird stroller … I dinged my Stanley quencher because it did not fit well in my Mockingbird stroller, so here is gravity holder that will hold that humongous…
These are inserts for the Stanley 10-Compartment Deep Pro Small Parts Organizer. My son uses this to transport his Magic The Gathering decks when he goes to play. The Stanley organizer comes with two double wide bins by default. Printing…
2 part holder for Stanley knife. You will also need: 2X M4 printed inserts from the original Honeycomb storage wall design 2X M4 nuts 2X M4 12mm screw
Replacement side latch for Stanley rolling workshop / toolbox. Stanley part number: 19500300 It fits my Stanley STST18631 toolbox and other models as well. I printed in PLA with 15% infill. As of May 2025 it has held for ~3 years and is…
Um trotz des mittleren Griffs von Veluxfenstern die Fensterdurchführung benutzten zu können, habe ich Aussparungen hinzugefügt. Actung: Es gelangt ein kleiner Teil der Abwärme zurück in das Zimmer.
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
Print settings: 2-3 walls Supports are needed At least 15% infill Scale the model in your slicer because I accidentily made it wayyyy to small. 🙈 Happy printing :)
Printed with PETG, 15% infill, 4 walls
I mixed and matched and editted both the outer cups and the inserts as they didnt fully fit with the original cups. I tried to make the top opening in the bottom nested part as small as possible, so the content won't overflow. Bear in…
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
Do you want to celebrate with the NHL winners? Or maybe just want a cool conversation piece? Well this is for you. This is a miniature version of the NHL Stanley Cup.
Its 2022 and the Colorado Avalanche win the Stanley Cup and only takes 15 minutes for them to drop it and dent the bottom! This 150mm (5 7/8in) replica celebrates their championship!! Its is broken up into multiple pieces to account for…
Easy to print utility knife. Inspired by dhp73s design. New version
Disclaimer: although this is already a working prototype, it is still a work in progress, mainly improving ease of print. I have more tools than batteries and hate leaving the connections exposed when I throw a tool in the toolbox, so I…
This will hold a normal 16mm chapstick
I use a lot of these organizers vom Stanley for my screws and electronic stuff. But I was never happy with the ammount/size of the bins. So I set myself to work to make a good variety of different sizes. All bins have a 2mm bottom and 2mm…
Gridfinity tray to hold a Stanley 22 item wrench set. Small tray nests on top of large tray, and all fit in a standard tool drawer with Gridfinity. The original set looked like this and was purchased at Bunnings in New Zealand.
I have reduced the depth of the top drawer by 5mm to allow one at the top and one at the bottom.
I received the LianLi Dan A3 case a couple days ago. It's nice but the front is closed. So I designed a rough sketch for the front Panel. I think I will optimize the Model more but for a first sketch it's fitting Pretty good. I hat to cut…
Model Stanley Cup Jibbitz for Crocs Note: I have had difficulty printing the text with .4mm nozzle, so for that reason I decided to include a file of the cup that has no text at all. This will print the easiest and fastest. Supports: If…
Wife saw a tiktok and wanted a custom handle for her stanley cup that would hold her chapstick. Threw one together. Recommend to use PETG since it will likely get wet. Recommend to rotate it to lay flat on the print bed to avoid supports.…
I use the the Stanley Professional Organizer case (Part No. 014725R or 1-92-748) to organize my small LEGO parts. I like it because it is very sturdy, it has clear and hard plexiglas top and a versatile divider bin system. However there…
This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…
You Need These Parts: 1xStanley Blade 2xM3 Screw 2xM3 Nut Blade Measurement: Added 2 M3 Screw support Optimized for ease of grip I recommend to print it with 0.12mm layer height I remix this model but i cannot find the original model…
A 120mm fan mount for the “fanless” Topton N100 router PC. It lets you securely mount a fan without case modification.
This was a created to hold the stanley FatMax 25' tape measure on the side of my dewalt table saw there is a second variant which is screw mounted to a wall (I used that on the side of my router table). Basically it's a holder that can…
Needed a holder for my stanley exacto knife.
Bench dog 20 mm for hole grid system. Also required for the production of the hole grid in conjunction with the hole grid template. The model of the hole grid template and the manual can be downloaded from my profile. 2 Versions…
These are for the Stanley 014725R 25 compartment organizer. RELATED THINGS: Stanley 014725R organizer - large 3 compartment bin with lids plus 4 bins https://www.prusaprinters.org/prints/79588 Stanley 014725R organizer - medium 3…
Yet another ANL fuse holder. This one has a smaller foot print ;) (excuse to punt) because the mount hole are under the actual fuse body. The detailed parts list is included as a PDF file. IMPORTANT NOTE: the exposed ring terminals must…
Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Two 49.5mm inserts fit one large compartment One 47mm insert fits into the small ones Added New Version reduced wall material simplified shape
Divider for drawers in STANLEY “multi-use” cabinets. Quick & easy print – ideal for using up small amounts of filament. :) OpenSCAD files are included. Check out my feet for this cabinet.
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
Adapter um den Abluftschlauch einer mobile Klimaanlage an ein Dachfenster zu hängen
A set of handles for your metric Allen wrenches, modeled on the Stanley Workmaster trilobular screwdriver handle. I've also included a handy lil' caddy, so you can tote them around! I've included the .f3d file if your particular wrench…
![Stanley SortMaster Junior Box (1-97-483) [REMIX]](https://media.printables.com/media/prints/770450/images/5995909_5bfed59c-7735-4558-a67f-d2bc8d4c0be3_481684e8-28d2-46b3-bc93-22e368651430/img_20240218_182537830.jpg)
