298 models
Note: I did not make this model. Just reposting it from here . All credit goes to 123one . Use this 3D Printed Cleat set to attach plywood (or almost anything) to the top of a Festool / Tanos T-Loc Systainer creating a mobile work…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for PETGSource material: PET
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for one variant
Side spouted jar made in Canosa, Italy. Now located in the British Museum, London I have mixed feelings about this design in general. Its kind of gobbledygook - so much going on. When I saw it I was like… well thats a mess, got'ta turn it.
Print approx. €20.79–€25.41 excl. taxPreliminary estimate for one variant
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Thanos, in Infinity War, is a pretty interesting guy. He's a villain, but it's difficult to dislike him, right? Also he changes outfits…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. For FDM…
Thanos necklace on anything you want
Hi Steve, sorry this took so long, but I finally pulled the Guantlet from Uziblatsers Game model, Hopfully there is something in here you can use on your project. Do check the sizing suits your needs and post some pics if you do take the…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This has been designed to be a wearable 3D-printed Infinity Gauntlet. You'll have to modify the Infinity stones to add coloured LEDs if you want the full movie prop effect, enjoy!
Hi Craig, this was all I could through together. Hopefully it will work for you and as always check the sizing suits your needs. please post some pics if you do take the project on, A big thanks to Lllium03 for his model too, Cheers Jace.…
A replica of Thanos' weapon made by me based on the original weapon from the AVENGERS series Best result when printing a 0.15 or 0.2 mm layer Visit me to see more accessories for DUMMY 13
Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…
Allgemeines Eine Datei für die Beschriftung von Tanos/ Festool Systainern der Generation 2. Die Höhen sind auf eine Layerhöhe von 0,3mm ausgelegt. Druckeinstellungen Drucker: Prusa MK3s Schichthöhe: 0,3mm Infill: wird nicht benötigt…
Fully parameterized Fusion3d model for Tanos/Festool Systainer organizer boxes (shorter systainers with clear lids). 68mm tall (also parameterized). Parameterization allows you to specify the number of "units" (squares in the Systainer)…
The single design that you hands down never thought you needed. (And probably don't) Introducing Thanopus! He shall conquer the galaxy with his articulating appendages! I had previously seen an interesting model of an articulated octopus…
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi. Can be used to attach a custom MFT style board to top case. Beware the existing classical…
I created a Measuring Tool for my Systainer to fast determine my loose screws up to 70mm length and diameter from 2mm to 6mm.
Title says it all really: it's Gridfinity for Sortainer! CHANGELOG: 04 Feb 2024 Added single part and 4 part split files
Adjustment kit for the Vanos in BMW engines (M52 and M54) I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters. It worked a charm on my engine swapped Z3 who's vanos got out of…
Diorama Display Base for 1/6 Scale Hot Toys Endgame Thanos action Figure or equivalent 2 X obj files Laid out to fit Anycubic Mono-X in 2 Parts 2 X stl files Laid out to fit Anycubic Mono-X in 2 Parts 1X Main Base 1X Big Tube 2X small Tubes
For the Cover i recommend a 0.12 layer height and use a pause on layer 38 for change filament Walls: 3 Cover need supports
Thanos Can Holder Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 32°)…
Original model is by Geoffro 4 : https://www.thingiverse.com/thing:1752668
I re-made this model to be able to adjust the Nanostation even more then the previous model. A wider range to be able to point the Nanostation makes it easier to mount it to the wall one time and not have to worry about it again. Printed…
No entiendo como se pueden vender estas cosas, mi padre sufrio un accidente cerebro vascular hace un tiempo y al no poder comprar el modelo me hice uno propio, solo se necesita el modelo y unas cuantas banditas elasticas. el modelo es mio…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Will definately need to be scaled, but could be a viable cosplay suit ; ) When I was stripping the Gauntlet back from the model I couldnt help but go that one step further and attempt to pull the armour out of it. Hopefully someone can…
I needed an easy way to track and find my Toolbox. For this i use an Apple AirTag and i tried to find a “hidden” place for the Tag, because i need the space inside my Toolbox and the the tags should not be easy to find. So i create a…
Guanto Thanos per stampanti FDM REALIZZATO con LotMaxx Shark V2
(not so) To scale model of the real life building for “Los Pollos Hermanos” from Breaking Bad. Made in blender, printed at 0.20mm layer height with 10% infill. In total, it took about 20 hours to print everything. Notes: LPH_Full.stl has…
This work uses BS Horb's Festool Systainer3 models to then build a flat insert for the bottom. I found that my Tanos-branded M137 however had slightly different cutouts, so I made some additional cuts. What’s left in the end is a flat…
I present the scene between Thanos and Spider-Man. Thanos has just sliced off Spider-Man's arm and he is not happy. "You dare to challenge me?" Thanos bellowed. "You are nothing compared to me!" Spider-Man tried to back away, but he was…
Inspired by the idea of 3DWunderwerkstatt I create my Bosch GSR 12v cordless screwdriver holder for Systainer T-Loc Systems. It’s designed to fit on all sites and for left or right handed people. I created a bit higher then other people…
This Thanos Shaped Bulldog model was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Revopoint team found a funny and cute bulldog model with Thanos's face. Then we…
This 3D print model provides a secure wall mount specifically designed for the NanoStation Loco M2, but it may also be compatible with other models. The mount allows the antenna to be rotated horizontally by approximately 100 degrees,…
Simple wall mount brackets for the Ubiquiti Nanostation / Loco M2 M3 M5 AccessPoints Print Settings Printer: Prusa Mini+ Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 20% Filament: BASF Ultrafuse PLA Grey Category: Computer
Painted with PrusaSlicer, It tooks 11 colours because of the ‘stones’ on the glove, so you have some manual filament swap to do : 50,00mm, Extruder (5), Black to Yellow 55,20mm, Extruder (4), Gray to Red 55,60mm, Extruder (5), Yellow to…
This is an outdoor wall mount I made for a couple of Ubiquiti NanoStation AC PtP/PtMP bridges so I could angle them up/down and side/side. The mount it comes with is a flat wall mount. PLA I printed the posts on both mounts at 100% infill…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
This model is compatible with the lego system.
This is a faithful reproduction of the Autodromo Hermanos Rodriguez. Its dimensions are 20cm long, 12.5cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model,…
Plastic containers Box for Systainer Organizer. The boxes are fuly compatible wiht the original containers and the gen3 Systaner System. Stack 2 on each other the hight is by 68mm. Printing The Modells are designt with following printing…
Thanos Bust - on a base with lettering Printer : Artillery Sidewinder X2 layer height : 0,12 line width : 0,8 no support ; Lightning infill 10% ; print time ~ 9 h JAYO PLA+ Silk Grey MakerWorld : https://makerworld.com/en/@sweb3791 My…
you've got the tennis paddles and ball from 3Dovanos ( https://www.prusaprinters.org/prints/26450 ) ? Now just need the net. Use this portable net this any table. For net you cant use wool thread, prusment filement,... for th ecomplete…
Remix of original model, where gap for metal clamp, which came with Ubiquiti antenna, was too narrow. Print settings: Material: ASA / ABS (for outdoor use) Layer hight: 0.3 Wall Line count: 2 Infill: 15% Supports: Yes Scale of model: 45%
Autodromo Hermanos Rodriguez, Mexico, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
The original model is made by Eastman, I just prepared it for multimaterial printing inside Prusa Slicer. It uses 4 colors (PETG): 1. base (in my case black) 2. armour (gold) 3. body (purple) 4. armour 2 (blue) Printed on Prusa XL 5T
Australian scout fleur de lis woggle - Canuto o pasa pañuelo con flor de lis de Scouts australianos. For scout neckerch
These are 3 individual coins more than likely best printed on a Resin printer. The coins are Iron Man, Thanos, and a combination coin for when you can't decide if you want to save the world by removing half the people or by bringing them…
Porta Rollos de PAPEL para Cocinas baños y Lugares de Trabajo
Crysis PS3 nanosuit this is large size I have make it as 3 parts or 1 Category: Creatures
F1 circuit Autodromo Hermanos Rodriguez Mexico City - with elevation, with data taken from f1.com (circuit shape and elevation points). Can be printed as it is or scaled to desired size.
Here my Spirit Level Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Spirit Level ;) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
Boquilla 0.4 Relleno 8% Perimetros 2 Cortar el modelo a altura de z 2.0 e imprimirlo arriba mediante z offset, cualquier ayuda contactarme Categorías
This is still in beta face files, and other things might change. Infill 25% supports required tree supports recommended Print in PETG tessreact https://www.printables.com/model/716741-tessreact-for-thanos-jointed-figure/files
1:64 scale model of a yangchuanosaurus. The model features detailed scale texturing. There are two versions of the file, standing and posed. The .STL files are fairly big, they may take a while to load.
The official Toughbuilt Stacktech cart in out of stock everywhere and has been for a while so I just made this adapter plate to connect my Stacktech toolboxes to my extra Festool/Tanos Systainer Cart. Works great. Stacktech cleats go on…
Doey's Discarded Dino Dessert is now available to 3d print! The Key (pun intended) to printing this model is printing pieces that share the same color. Every colored piece is organized to be printed with other pieces of the same color for…
The Amulet of Julianos from the game Skyrim. How I Designed This I used pictures from the game as well as a nif file out of the game folder as references Screenshot from the in-game inventory Nif File from the game source folder Category:…
This is a system for modular drawers and inserts for a Tanos Mini Systainer T Loc. The tool insert is very Specific to my workplace, but I include all Solidworks files, so you can edit them how you wish! The Tanos Mini systainers slot…
If you are as handy as me and your smartphone falls into the toilet, you may need this NanoSIM to MicroSIM card reduction for your older phone ;-) I recommend printing with a layer height of 0.15 mm.
Design Concept The Mecha Tyrannosaurus is designed to combine the fierce nature of dinosaurs with a futuristic mech style, offering a dynamic and imaginative figure that captures attention. Usage This model serves as an educational toy or…
Thanos Head Pot Plant There's a version without hole so can be used as a container Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) No supports needed Scale it as you like :) Remixed, Model by Massed Heydari
the titanosaurus is a sauropod that loves to eat plants
This is a model of the logo of "Los Pollos Hermanos" from the tv shows better call saul and breaking bad. It can be used as a pin, a magnet or even as a coster. This is a 2 color model, i recommend printing it in black and white like…
Heyho Here I have a small side project 4 you :) I use some mini systainer by Tanos to organize all my smaller screws and stuff. However, it always bothered me that you could only move the boxes very carefully if they contained small…
Thanos - Avengers: Infinity War / Endgame https://linktr.ee/blenkhorn3d See my Linktree link above for shortcuts to the following: 3D Model Request Form Patreon Exclusive Models Instagram More!
Einsatz mit 24 Fächern für die "alten", kleinen T-Loc Mini Systainer. Insert with 24 compartments for the "old", small T-Loc Mini Systainers. Passt NICHT in die neuen Festool Systainer³ SYS3 S 76 NOT compatible with Festool Systainer³…
Allgemeines Kleine ansteckbare & anpassbare Ablageboxen für Tanos/ Festool Systainer Generation 2. Die Fusion360 .f3d Datei ist parameterbasiert (Anleitung bei den Bildern), sodass jedes Wunschmaß möglich ist. Ab einer Höhe von 53mm muss…
2-axis wall mount for the Ubiquiti NanoStation AC loco wireless bridge. It require support for accurate printing. Please use PETG or similar material if exposed to sunlight. Required accessories: Superglue 1 x M3 brass threaded insert 1 x…
Sortierkästchen für die SYS-AZ Schubladen von Tanos oder Festool. 60x60 mm 120x60 mm 120x120 mm 180x120 mm Damit die Kästchen nicht verrutschen, werden die Abstandshalter benötigt.
Bonito mural minimalista basado en una parte del cuadro de la creación. Perfecto para una bonita y sencilla decoración de tu sala de estar 2 archivos, uno por pieza Archivo a tamaño de cama de impresión estándar de 235x235
Yanosik XS device car mount, designed for SKODA KAROQ
Vykrajovátka perníku, nebo lineckého těsta.
PORTUGUESE : Como cada um imprime em um tamanho diferente isso acaba ajustando a folga projetada para o encaixe. Uma orientação é para imprimir o busto com uma compensação maior caso esteja apertado ou menor caso esteja folgado. Eu…
Pin montażowy osłony pokrywy systainera SYS3 / T-LOC firm Tanos / Festool / Bott. Najlepiej drukować na małej wysokości warstwy materiałem PCTG.
Bring the power of the Mad Titan to life with this incredible 3D printable STL figurine that captures every intimidating detail of the universe's most feared villain. This masterfully crafted statue showcases Thanos in his iconic armor…
The Sopranos - Tony Soprano - 1999-2007
Don't we all need small boxes to fit into larger boxes, that fit into even larger ones? These are small, hinged containers that fit into 50mm Systainer3 organizer inserts. They save some room for very small or infrequently used parts. 7…
Thanos with love! Thanos bust with kiss face and Korean love gesture (aka finger heart) I created this digital sculpt for fun and solely just for 3D printing. Minor assemble and some super glue required.
Etykieta do systainerów SYS3 firm Tanos / Festool z logiem firmy Milwaukee. Sugeruję drukować w dwóch kolorach. Montaż pokazany na ostatnim zdjęciu.
This is an Adapter mount to add the Milwaukee Packout system to the Tanos Systainer. Now i can carry the cool magnetic bin for example ;) --------------------------- Update: 8. Jun 24 V2, changed a lot of tolerances.…
Iconic Movie Villains - Marvel Universe - Thanos
![[Diorama Display Base] for 1/6 Scale Hot Toys Endgame Thanos action Figure or equivalent](https://media.printables.com/media/prints/296380/images/2598265_93db2ce7-5e56-4cb0-aeb6-d3d091ca3377/avengers-endgame-thanos-display-base_00a.jpg)
