Counting matching models…
Easily printable holder for Antilop legs Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: Spectrum PLA White Category: Other
This is an over-engineered footrest for the very economical ikea antilop highchair. The collar parts compress the printed fingers against the legs to the footrest securely. Infinitely adjustable, the central joiner part allows the…
Ikea ANTILOP leg support for kid's chairs for easier transportation Print a set of 2 pieces
Foot stool for Ikea ANTILOP High chair with tray. Bill of Materials: 1 IN X 4 IN X 3 FT PINE HOBBY BOARD Two M3 Bolts Tools: 1" Hole Saw Jig Saw Sand Paper Instructions: Print pdf with wood size. Cut wood to length. Mark 4 location to…
This is a remix of Antilop Footrest from Tom Ewig but with thicker tabs. The original fastener works.
A leg holder for storing the legs of the IKEA Antilop highchair
This is my simple and minimalistic approach to make a storage accessory for the IKEA Antilop baby chair. Print 2 piece of this model and you can pop the legs into the slots and it will hold them firmly. Printing This model should be…
Clips for transport of the IKEA Antilop Legs. The pin in the middle of the clip is for pushing in the pins of the legs, so you never have to hurt your thumbs again. I printed it with nobufil petg, which is very strong. If you use other…
I designed this hook to store the baby aprons and napkins directly at the chair. The design allows to just snap on the hook to whatever leg you require. The size is designed to be large enough so that the hook cannot be swallowed by your…
Convenient handle for the legs of the IKEA high chair Antilop. Can be printed upright without support. When putting the legs in the handle, the first 3 should go in without a hitch, the 4th leg will properly need a bit more force, but…
I've created this support to mount a leg support for my toddler.
My version of an Ikea Antilop leg holder, with a different design from what i found in other models around. I was tired of the legs easily twisting out of the leg holder i had. This model is a bit sturdier than the other models i tried,…
This model mimics other footrests found on amazon. It attaches onto the legs of the ikea antilop high chair using hose clamps, creating a platform to attach a foot rest. For my footrest, I cut down a trex plastic deck board, it cost $16…
This anchor will hold a footrest in place for your Ikea Antilop high chair. The outer piece is printed in a hard material (e.g., PLA), and the inner piece is printed with a flexible material (e.g., TPU). Print two sets for each of the…
I really like the design of the original leg holder by SoupCake.. It's awesome when we'ere bringing the chair when visiting friends and relatives.. However, I've had to print a lot of them, as they always mysteriously go missing.. So to…
Easly print with TPU, 0.2 mm layer height, no supports needed
A leg clamp to suit Ikea Antilop high chairs. Used to secure a footrest. The top surface is sloped to match the splay of the chair legs. Print one of the pair mirrored to use on both legs. I printed in PETG and it was more than strong…
I wasn't happy when my kid was dragging the chair which was making loud rattling noises so I've decided to use flat feet where I could add floor protectors. And since the legs wasn't perpendicular to the floor and I didn't wanted to deal…
Tired of not having paper towel easily accessible when cleaning up after your baby? Me too, so I made this. Super easy to print, no supports needed. I used a 40% tri-hexagon infill and 3 walls and it's plenty strong enough. The version in…
We have a kid. Kids eat. They do not use regular chairs. This chair, IKEA Antilop is a great chair that you can travel with as the leg comes apart from the seat. But then the problem starts…. The legs are a pain to store. They roll around…
So another quick one. We read somewhere or someone told us that it's better that a baby chair has a step so that the babies legs are not dangling in the air. We had this old Ikea chair we inherited and it came with no step. So I made a…
this is a remix from the thingiverse : https://www.thingiverse.com/thing:4393969 You can print just the top and add it on the original print or print both part. I had to print it at 103% because of the decal stickers on the legs. use…
Simple filament spool rack based on 25mm pipe from IKEA Antilop legs Find the nameplates here: https://www.printables.com/model/955593-name-plates-for-filaments-25mm-pipe-ikea-antilop
Tired of your IKEA ANTILOP highchair legs getting in the way when you move or store it? I was too, so I designed this simple, 3D printable solution. With just two of these clips , you can easily snap the highchair's legs together for…
Modified the original to fit my antilop highchair. Uses the joiner and collar from the original model. If printing in PETG I recommend you cut out and print the locking tabs first. If not dialed in and dried the tabs may be brittle and…
The original design didn't fit on my Antilop legs for whatever reason. My legs have a slight bend at the top so maybe that was the problem. This design needs some sort of fastener below it in order for it not to slide down. I'll be trying…
We acquired an Antilop High Chair for free but the clips on the straps were broken. I modelled this clip as a replacement. I initially printed this in PLA but it broke after the first dozen or so uses. I have since re-printed in ABS and…
Wall mount IKEA Antilop Leg Holder
Find the Rack Holder design here. https://www.printables.com/model/955599-filament-spool-rack-based-on-ikea-antilop-25mm-leg
Antilopy Agáta a Adam z knihy ON-LINE ZOO. Kniha je volně ke stažení ve formátu pdf i mp3 na https://knihy.nic.cz#zoo. Kniha ON-LINE ZOO seznamuje nejmenší čtenáře se základy bezpečného chování na internetu. Tvorba modelu byla realizována…
A replacement Tri-Glide Slider for the IKEA Antilop high chair
Ständig fallen die Stangen vom Antilope Stuhl umher? Es hilft für etwas ordnung...
IKEA Antilop leg extender with a split screw and cap. Increases height by ~7". Hardware per leg: (2) M4 x 8 screw (2) M4 Nut (Using 4 screws per leg is not required)
Just print in your favorite high-vis color so you can see the ends of the legs with your peripherals.
Convenient handle for the legs of the IKEA high chair Antilop. Can be printed upright without support. When putting the legs in the handle, the first 3 should go in without a hitch, the 4th leg will properly need a bit more force, but…
A replacement Tri-Glide Slider for the IKEA Antilop high chair
Just print in your favorite high-vis color so you can see the ends of the legs with your peripherals.
I decided to go with a wider spacing of the legs, i tried a model with them closer together. With that version my fingers get pinched in between the legs. I printed on a P1S 0.4 nozzle 0.20mm layer height 4 wall loops 25% Gyroid infill…
I've printed several versions of the IKEA ANTILOP leg holders that can be found, for myself, family and friends. Once in a while, somebody asks me to print another one, because it broke. PETG is a great material, but the legs are too…
