Counting matching models…
An antler crown/headband that's open in the front for maximum reshapeability to fit your individual noggins. I highly recommend using cosplay calipers to measure the width and length of your head where you want the band to sit. Then,…
Print approx. €9.64–€11.78 excl. taxPreliminary estimate for one variant
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
this is not my model if found it on thingiverse just thought it was scool
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…
Print in current orientation with supports. PLA might be too brittle. May need glue, depending.
Made to fit an Ender 3 V2 print bed (235mmx235mm) when rotated to face a corner. How to Print Scaling Scale to 10000% for a ~140mm wide head (or 9750% w/ heat gun to reshape the back) roughly 200mm x 229mm x 166mm (xyz) w/ opening facing…
I printed it with 4 walls/ceilings/floor, 15% infill, tree supports, no raft, no brim.
Nothing's better than a deer head on the wall! Change the color of the antlers to suit each holiday. The Large model has the optimal size to print with the XL. The medium model fits on the Mk3/Mk4 Plate. Get the best output with a 0.4mm…
It's a festive headband with deer antlers. You could wear it a party. This is a mashup of two great projects: the antler headband by brendonoleary and project headband by calmabalot . Compared to the existing antler headband, this one…
Inspired by Old_Tekkie's antler scan (with Kiri Engine) i decided to do the same. Some 42 years ago we found this very nice (swedish) moose antler, hanging in a tree! We never found the other half, but thanks to modern technology (Kiri…
Probably the first upload of Nokotan's antlers on this website, all parts are included and correctly scaled in the shikanoko.3mf file. I recommend printing the headband with 4 wall loops or 100% concentric infill You can either glue the…
This model is compatible with the lego system.
I wanted to print an Elk Rack only, but could not find a suitable file, so I found an Elk and remixed it to be only the antlers. I printed them on my resin printer, Anycubic Photon Mono X.
Elegant deer figure with large polygonal antlers, minimalist and decorative.
The second iteration of the antlers for a friends cosplay
Made for HORNBAND wearable system or use for whatever you want! Hornband link in description. Scalable & Sharp! Get the wearable HORNBAND HERE: https://www.printables.com/model/1438067-hornband-wearable-horn-system Tree Supports on build…
Quick Facts Design: Antlers sized to fit Labubu figures—snap attachment, no glue or tools needed. Speed: Complete print in 31 minutes 42 seconds —perfect for last-minute holiday printing. Function: Adds festive personality to Labubu…
Hey there, my name is Jess, and I remixed this design by Hazel Domain, making it into a crown that blends into my hair and fits underneath my bangs. This design was printed using PETG Translucent filament. Very happy with the final product!
I know that the picture is a Bull elk so don't came after me for that this is just a test so I can see what works and what doesn't
Quick model to demonstrate the process to my mate
Remix of Antlers, modified to fit Meta Quest 3 - Accessory Mount This model depends on: https://www.printables.com/model/709247-meta-quest-3-accessory-platform-mk2 to mount to the Meta Quest 3. Estimations (PLA 15% infill on Elegoo…
Add a wild and rustic touch to your celebration with this unique "Happy Birthday" cake topper featuring stylized deer antlers. Perfect for nature lovers, hunters, or anyone who enjoys the outdoors, this 3D printable design makes your cake…
Made for HORNBAND wearable system or use for whatever you want! Hornband link in description. Scalable & Sharp! Get the wearable HORNBAND HERE: https://www.printables.com/model/1438067-hornband-wearable-horn-system Tree Supports on build…
This intricate piece features a powerful stag silhouette where the antlers transform into a magnificent "Tree of Life" botanical structure. It's a perfect blend of wildlife and organic geometry, designed to be a centerpiece in any modern,…
This model is compatible with the lego system.
Another (Swedish) moose antler set. Printing with the ‘crown’ and one of the points on the printbed gave the best results (see picture). Added a brim and overhang support >75.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Lowpoly deer for the wall.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Nokotan's antlers from the anime Shikanoko Nokonoko Koshitantan (a.k.a. My Deer Friend Nokotan), hollowed out so you can use them to store food, explosives, or LED strips! Slide two M12 nuts into the headband. Assemble the antler parts by…
Graceful yet untamed, this Forest Dryad Archer embodies the spirit of the ancient woods. With branching antlers, flowing bark-textured limbs, and roots entwined around her feet, this woodland guardian feels alive with nature’s magic. Her…
Vixen's Antlers We offered the six identical pieces of Vixen’s Antlers in two colours of your choice. The idea is to pair them of in bicoloured subsets, e.g. Using superglue, and combining the three pieces in an attractive hexagonal box…
This is a model I made is of my dream car. (Please comment)
Moose Antlers We call our Ford Van "Moose" so I whipped up these Bullwinkle style antlers to help decorate the beast! The base is to be glued on so you can insert these rare earth magnets http://a.co/d/cAM2hrT You might add rubber…
A small 3d printable headband with attachable antlers that click into place. Other ears can be clicked into place at the extra spots or the circle ears can be swapped out for other styles of ears. Mix and Match to make your own headband…
Command the power of the wild with this Forest Guardian Druid King, a majestic nature-bound warlord sculpted for high-impact display and tabletop dominance. Crowned with branching antlers and clad in bark-like armour fused with moss and…
-Make sure you lower it into the print bed to get rid of the rounded bottom. -Make it the size you like. -Print at high invil 90%+ to get a strong hook. -Use support. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Mysterious and powerful, this Ancient Forest Guardian represents the spirit of the deep wilderness. With massive branching antlers, a skeletal yet muscular form, and flowing natural robes that merge with the earth, this figure embodies…
Created with Rhino3D and ZBrush as a project I did for my wife. These are fashion doll scaled and designed to be printed on a resin printer capable of high resolution. Print Settings Printer Brand: Anycubic Printer: Photon Category: Art
A nose and some antlers to get into the holiday spirit with your FJ cruiser. I printed these in sainsmart TPU, 92A. Caramel for the antlers and translucent red for the nose. .3mf files are included. Antlers must be printed on XL due to…
note you will need to do some measuring for the holes in this moddle
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Antlers: There are 2 versions of the antlers: v1 is supposed to be printed flat horizontally, it fits on a 225mm bed print with 3 perimeters and 15% infill v2 is smooth on both sides and is supposed to be printed vertically (223mm) print…
Antlers TVC System by Moose Rocket Systems This is the thrust vector control design that I created. It is designed to work with 74mm inner diameter model rocket airframes, and 29mm or 24mm motors. The gimbal is mounted with the servos…
A cheerful reindeer with its nose lifted, closed smiling eyes and large rounded antlers. Flowing sculpted fur gives this standing deer a soft, decorative look for a Christmas shelf, mantel or woodland display. 📏 Size & Colors Print at the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
no supports, no brim, just a quick-raw easy print for the creality k series!
A keepsake box that closes into a pair of locked antlers. Two racks stand on the base and two on the lid. Drop the lid on with the racks splayed apart, twist a quarter turn, and the tines thread through each other — two stags with their…
This model is compatible with the lego system.
Command the power of the wild with this Forest Guardian Druid King, a majestic nature-bound warlord sculpted for high-impact display and tabletop dominance. Crowned with branching antlers and clad in bark-like armour fused with moss and…
Graceful yet untamed, this Forest Dryad Archer embodies the spirit of the ancient woods. With branching antlers, flowing bark-textured limbs, and roots entwined around her feet, this woodland guardian feels alive with nature’s magic. Her…
Mysterious and powerful, this Ancient Forest Guardian represents the spirit of the deep wilderness. With massive branching antlers, a skeletal yet muscular form, and flowing natural robes that merge with the earth, this figure embodies…
Antlers: There are 2 versions of the antlers: v1 is supposed to be printed flat horizontally, it fits on a 225mm bed print with 3 perimeters and 15% infill v2 is smooth on both sides and is supposed to be printed vertically (223mm) print…
An antler crown/headband that's open in the front for maximum reshapeability to fit your individual noggins. I highly recommend using cosplay calipers to measure the width and length of your head where you want the band to sit. Then,…
Print approx. €9.64–€11.78 excl. taxPreliminary estimate for one variant
Please like and download to help support me. More wall art on my profile.
Print some Antlers to add some Seasonal Cheer to Monitor. It all prints lay flat on the bed with no supports. then the Prop can be clipped into the back at the angle that bests suit your needs. Enjoy and Merry Christmas Thanks Bugman If…
This model is compatible with the lego system.
This is remixed off the awesome antlers at https://www.prusaprinters.org/prints/13272-screen-antlers adding a red nose webcam hole / cover. This is meant to fit a 27" iMac but may or may not fit others out of the box. Print the nose with…
Geometric moose standing tall, with large low poly antlers, decorative and elegant.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Infill: 5% in a grid pattern or as desired Quality: Printed at 0.28mm but can be printed at 0.2mm or lower Material: PETG is recommended but PLA can be used without issue; it also depends on the desired color
HexBug Antlers SolidWorks file included for mods. Print Settings Rafts: No Supports: No Resolution: .4 Infill: 40% Filament: Hatchbox ABS Notes: Anything should work. Category: Toy & Game Accessories
5x antlers open or closed version ( or a mix) 1x ring and you need to find a small glass (can wihtout ) now with extra ring for candle and special ring for the ikea finsmak tealight holder
I didn't like the stock spool holder that is in the Voron design so I re-mixed the sturdy handles by jeoje to make a matching spool holder. It just happens to look like Antlers. It's designed to work with the Universal Spool holder by…
I love wearing these antlers! They extend up at a slight angle, and they're small, petitie only has 2 tines so they are so lightweight and you never feel their weight. They could be the perfect addition to your project, be it for your…
Decided to scan some more moose antlers we found in Sweden over the years. The last one in the picture was found by my daugther at the age of 5. She is obviously very proud of it:) For printing instructions: I don't really have any,…
Original model was created by scanning a “euro-mount” of a white-tailed deer buck skull. The antlers where singled out and converted to a voronoi pattern. Note: I haven't printed this model yet, so use your discretion.
Made some Antlers to Print for a friend Buy me a Coffee https://www.paypal.me/obuluto
My daughter asked for a pair of antlers to fit on her inline skate helmet. They have a M6 threading on the bottom. Original scale is 7.5cm height. You can resize them but the threading will not be correct.
![Majestic Botanical Deer Stag Wall Art - Tree of Life Antlers | Premium 3D Printable Decor [STL + SVG - No Supports]](https://media.printables.com/media/prints/e8f8dc0f-fa6a-4da2-b465-29585c3af24d/images/12858843_18062905-f055-4fe9-8f96-5db8408fbc3e_cca86bea-f965-4c4b-9338-47122e3fe9a8/snimok-ekrana-2026-05-06-173116.png)
