1 / 3
Shikanoko Nokonoko Koshitantan wearable deer antlers (detachable) — image 1
1 / 3

Shikanoko Nokonoko Koshitantan wearable deer antlers (detachable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wearable detachable deer antlers from Shikanoko Nokonoko Koshitantan (My Deer Friend Nokotan)

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
123
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Antlers:

There are 2 versions of the antlers: 

  • v1 is supposed to be printed flat horizontally, it fits on a 225mm bed

    • print with 3 perimeters and 15% infill

  • v2 is smooth on both sides and is supposed to be printed vertically (223mm)

    • print with 0% infill and 2 or 3 perimeters

    • Don't forget to add brim because the base is quite small

    • Slow down to about 60-80mm/s because going faster produces a lot of ringing near the top

Note: The antlers are NOT symmetrical, print the second one mirrored

Headband:

There are 2 version of the headband as well, both with teeth for better stability. One is 8mm wider for bigger heads

Attachment:

For attaching the antlers print 2x screws for the band (led or regular) and 2 corresponding screws for the antlers, don't forget to mirror the second one :) 

Test the fit and if it fits nicely, attach the screw to the antler with super-glue and the headband screw by just sliding it on. 

If it doesn't fit, increase the XY compensation in the slicer, I made the screws with 0 tolerance for a tight fit.

I suggest printing both parts of the screw in PETG for better durability.

Led version:

There is a version of screw that fits a 3w led on an aluminium substrate (like this one: https://www.electrokit.com/en/led-3w-varmvit-3000k-pa-kort).

Slide the leds in and glue them slightly. Wires can be routed on the back of your head and into the hood for example (that's how I did it). LEDs heat up while working, so this version should definitely be printed from PETG or similar

I included the source blender files for you to edit

Tags