Counting matching models…
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
Lampička s obličejem Chase z Tlapkové patroly slouží jako lampička do dětského pokoje. Je ovládaná skrze kapacitní tlačítko, které řídí zvyšující (step-up) měnič pro LED pásek. V lampičce je umístěn i USB-C Li-Pol nabíječka baterií pro…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
Print instructions I print with PETG, 0.6 mm nozzle that significantly speeds up printing and also makes the part mechanically stronger thanks to higher layer (0.3 mm in my case). Another non-default setting is use of 3 perimeters.…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
Summary The initial monstera shape came from this Trimble SketchUp 3D Warehouse model, which is beautiful! (imho): https://3dwarehouse.sketchup.com/model/cbe233b0-6490-4615-a620-756281019874/Monstera-leaf From this 3D Warehouse user:…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
Chase na zeď
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
THANKSGIVING NAPKIN HOLDER Part called “ Turkey_Right_and_Left ” print 2x , part “ Holder ” print 1x . Print with 0.15 layer height and 50% infill , that way will those parts slide to itself easilly. You can find prusa mini gcodes down in…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Print PLA or PETG. You can print 100% infill for weight or just do the base 100% and down to 20%.
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
Renault szelepsapka
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Suzuki szelepsapka
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Peugeot szelepsapka
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A simple napkin holder with a hexagonal pattern that should fit most common sizes of napkins (max 16.5cm x 16.5cm). Print settings 0.2mm Layer height 2 Perimeters 3 Top/bottom layers 15% Infill - Grid No supports Materials Prusament PLA…
If you need other measurements, check out Liran017's remix --> https://www.printables.com/model/1273906-mountain-napkin-holder-various-sizes Add a touch of nature to your table with this unique mountain-shaped napkin holder, perfect for…
I converted my Flying Ace wall art into a napkin holder. The two halves should press fit together snugly. Snoopy Flying Ace Wall Art by southbaygsr | Download free STL model | Printables.com 0.4mm nozzle, PLA, Sovol SV01
Vykrajovátkem nejdřív vytvoříte obrys a poté tvarovátkem vytlačíte požadovaný vzhled.
Napkin holder with a tree design for the sides
Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…
Material: PLA Infill Owl: 15% infill platform: 25% use a little quick glue
Napkin holder with a slightly modern design. 165 mm wide and 125 mm heigh to fit standard U.S. table napkins. 5mm thick base printed with 100% infill to provide weight so that the holder doesn't move when a napkin is removed. Print…
Reindeer napkin holder for Christmas. Or why not every other time as well.
A napkin holder for the dining room table
Inspired by ones I've seen made out of wood or metal. Nice and chunky to give some weight - printed with Galaxy Black Prusament - gives a nice touch to the dinner table.
This is a holder for napkins (or anything, really) in a form of a scallop seashell created from a 3D scan made by iuferky . Can also be used as a stylish marine-themed decoration piece. In its default size, this is best suited for…
This design, while intended for use with an ams/ace system, BUT if you wish and do not have multi-color printing, you can manually change the filament on your 3D printer (the last layer is the second color). Use the Base+Top_9x9_wm. For…
Flame napkin holder. It is printed from wood-filled pla.
Thank you PhilippHee for the tree for this project. https://www.printables.com/model/91255-christmas-tree-windowdoor-sign-2 I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The base…
decorative napkin holder. Not for sale.
I designed a napkin holder for the modern home. The part requires very little infill for the first 5mm. Slots were added to the bottom to decrease the amount of plastic needed to print.
Thanksgiving Turkey Napkin Ring designed in Tinkercad. Two versions available - one with feet and one without. I prefer the one with feet so it can double as a table decoration while eating. I printed mine with 10% infill, random seams…
Thank you @printthatboii for the turkey for this project https://www.printables.com/model/312372-thanksgiving-wall-art-turkey I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The…
Print this spooky snap together spiderweb napkin holder for your Halloween party table. Print 2 sides and 1 bottom, then snap them together. If the sides are loose you can use a bit of 3d Gloop or glue for a secure permanent assembly. If…
I thought it would be cute, and I think I was right
Christmas Napkin Rings While exploring Tinkercad I found the polygon shape. After some copying and mirroring these nice rings came out. No supports needed. I printed with 0.15 mm layer height.
I printed this in PETG and will see how long it lasts.
Acorns are a common symbol for the Autumn season. With many celebrations coming this time of the year, we thought about making something for decorating dinner tables. These acorn napkin rings can be used as ornaments on your dinner table.…
Easter Rabbit Napkin Decoration 🐰🌸 Looking to add a charming touch to your Easter table? This adorable Easter Rabbit Napkin Decoration is just what you need! 🐇✨ Perfect for creating a festive atmosphere during your Easter lunch or dinner,…
A Napkin ring designed using OpenScad and the dotscad extensions. Prints fine with PLA and no supports.
Allows you to identify who each napkin belongs to. Required material: printed parts x1. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
Decorate your dining table with a napkin holder or make a wonderful gift for your friends. Print all the pieces and put them together. You can use some glue. Fold the napkins diagonally and insert them into the skirt. Take multi-colored…
Simple napkin holder. I needed a holder for 15mmX15mm napkins. I had fun designing it in Fusion 360. The one that we had broke (Ikea) so I copied the design and adapted it to my needs. Print Settings Printer Brand: Creality Printer: CR-10…
skitch23's adorable napkin holders with a flat bottom rather than the ring/feet. I recommend printing one as a test to make sure they fit your napkins and then scaling as needed. Birds in pic are .2, 4 perimeters, 15% infill, ironing on.…
My gf wanted a napkin holder so I made her this one which has a semi-interesting design. Very easy to print as well. Print instructions print with the base of the napkin on the base of the printer, no supports, I recommend .2 layer height
Printed with PLA plastic with wood filling. You can print with any plastic without supports. Printing on the Flsuns SR printer takes about 4 hours
Small napkin holder for 105 x 105 mm napkins. Printed with the option “fuzzy skin”.
Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…
The napkin rings have inner diameter 35 mm and a height of 25 mm. Two verisons: first one with an heart cutout second one without a cutout Print instructions The napkin ring with the cutout should be printed like this.
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Supports: recommended
Thought the gnome was cute. My partner got the great idea of turning it in to a napkin stand! Should not require any special print settings. I sliced mine with lighting infill which lowered the print time greatly. The model should be okay…
Basic but clean modern design of a napkin holder If you like my design you can always Buy Me A Coffee
A simple napkin holder, designed to be printed in place with no supports. I suggest printing with PETG for moderate flexibility, though as you can see from the picture, that will make it a bit more "boogery" Can be scaled up to fit your…
In the photos, the blue dispenser is the newer design with a bit thicker walls. There are now three sizes of the Z fold napkin dispenser uploaded: Napkin size 220x110, 60mm tall Napkin size 220x110, 100mm tall Napkin size 195x75, 100mm…
I wanted a napkin holder for my Valentine's Day decor so created this double heart design. d Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: eSun PLA+ Red Category:…
Please be forewarned that I haven't printed these myself, and that they will require supports to be printed.
Tying the knot? I've made some heart-shaped knotted napkin rings to share with you! Available in three sizes are stylized napkin rings, textured like a rope and shaped like a heart! Approximate inner diameter measurements are as follows:…
Cat napkin holder, better size 18% from the project
As stated above it is a ring for napkins, looks great if you have many napkins, for example at a birthday, it is very fast in printing, has basically no chance of stringing, and you don't need any support.
A kitchen table centerpiece with space for salt and pepper grinders, as well as a napkin holder. STL and Fusion360 files are included so you can adjust the model to the dimensions of your grinders. There is a raised ring inside the…
Druk: Prusa mini+.PLA generyczny, bez podpór
I made this napkin holder because the old one was broken. There are 2 designs available. A small one and a bigger one. I have just printed the bigger one for myself. The used napkins has the following dimensions: 16.5cm x 16.5cm (from…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7
Spruce up your St. Patrick's Day table with this festive swirly shamrock napkin holder. Holds napkins or anything else you feel like placing within it. Sides A & B press fit together for me when printed on the Bambu X1-Carbon, but feel…
Yet another request to make a matching napkin holder for the soap dish and tissue holder. I made 2 models; a small one (_v1) with an opening of 60mm and a grande (_v2) with an opening of 120mm. I split the model in half so that I can…
Napkin holder with Christmas motif. Great for Christmas Eve dinner, or just during the Christmas season as a decoration on the dining table Printing instructions: The model is made of two parts that fit together. Each printer prints a…
Info: bent leaves autumn design napkin holder
Dale un toque festivo a tu mesa con estos lindos anillos para servilletas inspirados en la Navidad. El set incluye tres diseños diferentes: 🦌 Cuernos y orejas de reno 🎁 Regalo navideño 🌲 Arbolito de Navidad Cada anillo tiene un diámetro…
Simple, plain, elegant paper napkin holder for 165mm square napkins . Feel free to use and change the Sketchup file however you like.
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
dog's paw keychain (psí tlapka klíčenka)
It is assembled without glue using the spike-groove method (0.1 mm gap). It consists of 5 parts (2+2+1 ). The thickness of all parts is 2 mm. Assembly dimensions 13x13x13 cm. 0.2mm Layer height 2 Perimeters 3 Top/bottom layers 15% Infill…
if you like this napkin holder look at my profile I have several you can print in 3d or cut with a laser good luck and enjoy the impression CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
Easy to print Christmas decoration. You can use it as a napkin ring (scaled down to around 60%) or as a round table decoration. If you want you can even hang it on as a Christmas tree ornament also.
Napking ring set with 6 different type (embossed) decorations for your Christmas or New Year celebrations. Print instructions Print at 0.2 mm layer height (5% gyroid infill is enough). I also recomend use ironing feature on Prusa Slicer…
Following our standard of simple designs, we decided to put together a simple but aesthetic design for a napkin holder. There's not much to it but. Does there really need to be? If you like it, head on over to MentaPrints and check us out…
Hallo, ich habe einen einfachen Serviettenständer entworfen. Er ist sehr einfach zu drucken. Es gibt drei Varianten. In Variante 2 hast du die Möglichkeit ein Feuerzeug und Taschentücher unterzubringen. Viel Spass damit. Bitte Bilder von…
Add some holiday charm to your Thanksgiving table with these festive napkin holders! They come in four fun designs, a Autumn leaf, Pumpkin and two differen Turkey designs. Perfect for adding that extra touch to your family dinner setup. ✨…
Sized for standard 5 inch napkins. The orange sample is printed at 100% and holding 6.5 inch napkins. Scale up to 130% like the black sample for use with 6.5 inch napkins (the napkins napkins in the photos) Prints in pieces without…
Servilletero cuadrado realizado para servilletas de tamaño máximo de 125mm x 125mm
Mix and match from this distinctive collection of spiraling napkin rings. Print a full compliment of 6 in the color of your choice on a single build plate. Or stir together your own unique collection, each in a different color. Short or…
Model Remix of exopunks napkin holder. The original model was way too tall for my need, so i reduced the height to half the original model. ___________________ A simple napkin holder with a hexagonal pattern that should fit most common…
I used a buckle clip style design to make the model collapsible. (see third image) The flames are designed to be friction fit but I also used a small amount of glue just to be sure. Print settings: I printed all parts with 0.2mm…
Napkin ring (Servilletero in spanish) This is a napkin ring with a customized name engraved on it. The 3MF and STL files have my own name engraved (Enric). I know, i know, your name is probably different, so I'm including the Fusion 360…
IS-2 Soviet Heavy Tank Snapkit Edition Introducing my new vehicle series: QUICK-BUILD! No AMS, no Glue Scale 1:48 Custom easy to remove CAD supports Total printing time only +-8 hours Total filament usage only +- 90g Model has rotable…
Just another Eisberg Napkin holder, but made this with thinner walls (strong enough)... Print settings: 4 walls 4 top/bottom layer 15% infill Happy Printing…
Epaisseur 5 mm Hauteur 7/8 cm Diamètre du trou 4 cm
This remix of the fun cat napkin holder adds a strong support base, fixes the non-flat bottom, removes the extreme overhangs, and rounds out all the edges for a nicer print and touch experience. The included Fusion file has custom…
Special napkin holder for the holiday season. Customizable with name and event. Print instructions After printing both parts, just fit and glue one into another.
Mountains and forest are inserted into the grooves of the stand
Prevent your napkins from flying around. Do not use supports otherwise you will not be able ta add the lid halfway the print You have to print the lid first. If you print the box ad a pause halfway so you can add the lid (see pictures). I…
Add some holiday charm to your Christmas table with these festive napkin holders! 🎁🎄 They come in four fun designs, a gift box, Christmas tree, Santa hat, and reindeer antlers. Perfect for adding that extra touch to your holiday dinner…
Impress your friends and family with your new 6" Square Napkin Holder - Voronoi Edition
Schicker Serviettenhalter, einfach, schlicht und schnell gedruckt
This is my version of an modern napkin storage. My woman loves this design. You don't need any support for this model.
Printing infill: 15% 3D honeycomb Material: PLA Layer height :0.2mm top fill pattern :Concentric (purely esthetic) Assembly the gray piece should be glued in place with super glue after making sure it can fit close to a 90° angle. Also…
I printed everything at 0.3mm with 20% infill, with 1.2mm walls. Split into 9-inch sections for ease of printing. Painted with normal off-the-shelf spray paint. Everything is joined with a two-part epoxy in the joints.
Klapka je přizpůsobena tak, aby vstup pro čmeláky byl bezpečný i pohodlný a současně zabránil vstupu nechtěného škodlivého hmyzu. V tiskových souborech je tělo klapky a lišta. Pro správnou funkci je potřeba samotnou klapku opatřit ještě…
