P
Printablestammets
Reindeer napkin holder
Reindeer napkin holder for Christmas. Or why not every other time as well.
- Pobrania
- 1088
- Polubienia
- 315
- Ocena
- 4,81
Wyniki wyszukiwania: apk
Liczymy pasujące modele…
P
Printablesfixumdude
Spiderweb Napkin Holder
Print this spooky snap together spiderweb napkin holder for your Halloween party table. Print 2 sides and 1 bottom, then snap them together. If the sides are loose you can use a bit of 3d Gloop or glue for a secure permanent assembly. If…
- Pobrania
- 682
- Polubienia
- 242
- Ocena
- 4,92
P
PrintableschiptronCZ
Lampička Tlapková patrola / Lamp Paw Patrol - Chase's face
Lampička s obličejem Chase z Tlapkové patroly slouží jako lampička do dětského pokoje. Je ovládaná skrze kapacitní tlačítko, které řídí zvyšující (step-up) měnič pro LED pásek. V lampičce je umístěn i USB-C Li-Pol nabíječka baterií pro…
- Pobrania
- 648
- Polubienia
- 139
- Ocena
- 5
P
PrintablesMaxT
Christmas Napkin Ring Set, 8 different pieces
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
- Pobrania
- 556
- Polubienia
- 107
- Ocena
- 5
P
PrintablesTec
Pool skimmer flap / Bazénová klapka skimmeru
Print instructions I print with PETG, 0.6 mm nozzle that significantly speeds up printing and also makes the part mechanically stronger thanks to higher layer (0.3 mm in my case). Another non-default setting is use of 3 perimeters.…
- Pobrania
- 508
- Polubienia
- 44
- Ocena
- 5
P
PrintablesNeybao
Fall Themed Napkin Holder
Printing infill: 15% 3D honeycomb Material: PLA Layer height :0.2mm top fill pattern :Concentric (purely esthetic) Assembly the gray piece should be glued in place with super glue after making sure it can fit close to a 90° angle. Also…
- Pobrania
- 229
- Polubienia
- 74
- Ocena
- 4,67
P
PrintablesIridium
Vianočný držiak na servitky - XMAS napkins holder
Aby mal držiak peknú texturu z pohľadovej strany rozrezal som ho v sliceri na polovicu s kolíkmi pre správne poskladanie a vytlačil som ho na smooth plate. Možno bude potrebné trochu očistiť vytlačené kolíčky alebo trošku zväčšiť dierku.…
- Pobrania
- 168
- Polubienia
- 32
- Ocena
- 5
P
PrintablesMake by L.
Face mask strap (aka. rouškolapka) with variable length
(CZ) Jednoduchý pásek za hlavu, který lze připojit na šňůrky na roušce nebo respirátoru. Maska pak lépe těsní, z dlouhodobého nošení nebolí uši a lze ji rychle stáhnout na krk.
- Pobrania
- 153
- Polubienia
- 11
- Ocena
- 5
P
Printablesclausb007
Easter Napkin holder // Serviettenständer Ostern
If you like one side more than the other one, you can also print that preferred side twice. PLA works fine for all parts. The sides are compatible with my other napkin holders. The base plate only needs to be printed once and can then be…
- Pobrania
- 121
- Polubienia
- 28
- Ocena
- 5
P
PrintablesMake by L.
Face mask strap (aka. rouškolapka)
(CZ) Jednoduchý pásek za hlavu, který lze připojit na šňůrky na roušce nebo respirátoru. Maska pak lépe těsní, z dlouhodobého nošení nebolí uši a lze ji rychle stáhnout na krk.
- Pobrania
- 103
- Polubienia
- 5
- Ocena
- 5
P
Printablesdankat
Monstera Napkin Holder
Summary The initial monstera shape came from this Trimble SketchUp 3D Warehouse model, which is beautiful! (imho): https://3dwarehouse.sketchup.com/model/cbe233b0-6490-4615-a620-756281019874/Monstera-leaf From this 3D Warehouse user:…
- Pobrania
- 94
- Polubienia
- 48
- Ocena
- 0
P
PrintablesTenz
Napkins holder
A simple napkins holder with wine theme design. The base can hold and hide 2 magnets to bond on metallic surfaces with max dimensions: radius 16 mm height 5 mm
- Pobrania
- 84
- Polubienia
- 15
- Ocena
- 5
P
PrintablesMakeIt.STL
Tlapková Patrola (PAW Patrol - Zuma and Marshall) - Zápichy do dortů / Cake Toppers
🐶 Tlapková Patrola - Zápichy do dortů 🐶 Tento balíček obsahuje 3D tisknutelné zápichy do dortu s postavičkami Tlapkové Patroly – konkrétně Marshall (hasič) a Zuma (vodní záchranář). Perfektní doplněk na narozeninový dort pro malé fanoušky…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
PrintablesIridium
Cutlery drip tray - odkvapkavač na príbor
Závesný odkvapkávač pre príbor.
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFabrigator
Napkin Holder
Print PLA or PETG. You can print 100% infill for weight or just do the base 100% and down to 20%.
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMichaela Králíková
Taneční náušnice - Jantarové jiskry, Kapky rosy a další
Tištěno na organzu a dozdobeno kameny. Náušnice lze snadno přizpůsobit potřebám tanečnice! Stačí si vytisknout kroužky na barvu látky šatů, ideální je průhledná organza, ale stejně dobře funguje i jemná krajka, nebo tyl. Díky průhlednosti…
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 0
P
Printablesexopunk
Napkin holder
A simple napkin holder with a hexagonal pattern that should fit most common sizes of napkins (max 16.5cm x 16.5cm). Print settings 0.2mm Layer height 2 Perimeters 3 Top/bottom layers 15% Infill - Grid No supports Materials Prusament PLA…
- Pobrania
- 3582
- Polubienia
- 478
- Ocena
- 5
P
PrintablesJan-E.de
Easter Bunny Napkin Ring / Osterhase Serviettenring
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
- Pobrania
- 2279
- Polubienia
- 358
- Ocena
- 4,97
P
PrintablesPhiRequiem
Mountain Napkin Holder
If you need other measurements, check out Liran017's remix --> https://www.printables.com/model/1273906-mountain-napkin-holder-various-sizes Add a touch of nature to your table with this unique mountain-shaped napkin holder, perfect for…
- Pobrania
- 2274
- Polubienia
- 781
- Ocena
- 4,93
P
Printablessouthbaygsr
Snoopy Flying Ace Napkin Holder
I converted my Flying Ace wall art into a napkin holder. The two halves should press fit together snugly. Snoopy Flying Ace Wall Art by southbaygsr | Download free STL model | Printables.com 0.4mm nozzle, PLA, Sovol SV01
- Pobrania
- 2137
- Polubienia
- 340
- Ocena
- 4,94
P
PrintablesDerek Antrican
Tree napkin holder
Napkin holder with a tree design for the sides
- Pobrania
- 1802
- Polubienia
- 325
- Ocena
- 4,89
P
Printablesmarsl
Tlapková patrola vykrajovátka ( paw patrol cookie cuter )
Vykrajovátkem nejdřív vytvoříte obrys a poté tvarovátkem vytlačíte požadovaný vzhled.
- Pobrania
- 1802
- Polubienia
- 169
- Ocena
- 4,8
P
PrintablesC3D Garage
K1/K1C/K1 SE Napkin Strip Saver for use with CFS Upgrade Kit – Nozzle Cleaner Mod
Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…
- Pobrania
- 1307
- Polubienia
- 217
- Ocena
- 5
P
PrintablesThe Mabur
Owl napkin holder
Material: PLA Infill Owl: 15% infill platform: 25% use a little quick glue
- Pobrania
- 1165
- Polubienia
- 222
- Ocena
- 4,88
P
PrintablesAlex
Modern Napkin Holder
Napkin holder with a slightly modern design. 165 mm wide and 125 mm heigh to fit standard U.S. table napkins. 5mm thick base printed with 100% infill to provide weight so that the holder doesn't move when a napkin is removed. Print…
- Pobrania
- 1152
- Polubienia
- 119
- Ocena
- 4,89
P
PrintablesChris Diesch
Napkin Holder
A napkin holder for the dining room table
- Pobrania
- 1049
- Polubienia
- 70
- Ocena
- 5
P
PrintablesSolterra
Mountain Napkin Holder
Inspired by ones I've seen made out of wood or metal. Nice and chunky to give some weight - printed with Galaxy Black Prusament - gives a nice touch to the dinner table.
- Pobrania
- 902
- Polubienia
- 198
- Ocena
- 5
P
PrintablesVasilii
Scallop Seashell Napkin Holder
This is a holder for napkins (or anything, really) in a form of a scallop seashell created from a 3D scan made by iuferky . Can also be used as a stylish marine-themed decoration piece. In its default size, this is best suited for…
- Pobrania
- 824
- Polubienia
- 134
- Ocena
- 4,88
P
Printablesbigovereasy
Flexible Checkered Napkin
This design, while intended for use with an ams/ace system, BUT if you wish and do not have multi-color printing, you can manually change the filament on your 3D printer (the last layer is the second color). Use the Base+Top_9x9_wm. For…
- Pobrania
- 789
- Polubienia
- 335
- Ocena
- 5
P
PrintablesMike Anderson
Christmas Napkin Holder
Thank you PhilippHee for the tree for this project. https://www.printables.com/model/91255-christmas-tree-windowdoor-sign-2 I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The base…
- Pobrania
- 768
- Polubienia
- 148
- Ocena
- 5
P
PrintablesVille Lehtimäki
Napkin holder
Flame napkin holder. It is printed from wood-filled pla.
- Pobrania
- 768
- Polubienia
- 134
- Ocena
- 5
P
PrintablesAhmet Ilgaz AYCAN
Decorative napkin holder
decorative napkin holder. Not for sale.
- Pobrania
- 760
- Polubienia
- 364
- Ocena
- 5
P
PrintablesAnand Jasani
Contemporary Napkin Holder
I designed a napkin holder for the modern home. The part requires very little infill for the first 5mm. Slots were added to the bottom to decrease the amount of plastic needed to print.
- Pobrania
- 727
- Polubienia
- 93
- Ocena
- 5
P
Printablesskitch23
Thanksgiving Turkey Napkin RIng
Thanksgiving Turkey Napkin Ring designed in Tinkercad. Two versions available - one with feet and one without. I prefer the one with feet so it can double as a table decoration while eating. I printed mine with 10% infill, random seams…
- Pobrania
- 692
- Polubienia
- 124
- Ocena
- 5
P
PrintablesMike Anderson
Thanksgiving Napkin Holder
Thank you @printthatboii for the turkey for this project https://www.printables.com/model/312372-thanksgiving-wall-art-turkey I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The…
- Pobrania
- 690
- Polubienia
- 173
- Ocena
- 5
P
PrintablesArataKamikaze
cat napkin holder (with eyes)
I thought it would be cute, and I think I was right
- Pobrania
- 638
- Polubienia
- 153
- Ocena
- 5
P
PrintablesBootjevaarder
Christmas Napkin Rings
Christmas Napkin Rings While exploring Tinkercad I found the polygon shape. After some copying and mirroring these nice rings came out. No supports needed. I printed with 0.15 mm layer height.
- Pobrania
- 598
- Polubienia
- 111
- Ocena
- 5
P
PrintablesEric Sten
K1 Max Napkin Strip Saver for use with CFS Upgrade Kit
I printed this in PETG and will see how long it lasts.
- Pobrania
- 597
- Polubienia
- 70
- Ocena
- 5
P
Printablestwothingies
Acorn napkin rings with hidden storage
Acorns are a common symbol for the Autumn season. With many celebrations coming this time of the year, we thought about making something for decorating dinner tables. These acorn napkin rings can be used as ornaments on your dinner table.…
- Pobrania
- 578
- Polubienia
- 359
- Ocena
- 5
P
PrintablesAndrea
Easter bunny napkin decoration rabbit
Easter Rabbit Napkin Decoration 🐰🌸 Looking to add a charming touch to your Easter table? This adorable Easter Rabbit Napkin Decoration is just what you need! 🐇✨ Perfect for creating a festive atmosphere during your Easter lunch or dinner,…
- Pobrania
- 575
- Polubienia
- 108
- Ocena
- 4,88
P
PrintablesLumbermonk
Napkin Ring
A Napkin ring designed using OpenScad and the dotscad extensions. Prints fine with PLA and no supports.
- Pobrania
- 547
- Polubienia
- 83
- Ocena
- 4,63
P
Printablestolape
Napkin ring
Allows you to identify who each napkin belongs to. Required material: printed parts x1. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
- Pobrania
- 517
- Polubienia
- 57
- Ocena
- 5
P
PrintablesTanyaAkinora
Napkin holder Lady with hat
Decorate your dining table with a napkin holder or make a wonderful gift for your friends. Print all the pieces and put them together. You can use some glue. Fold the napkins diagonally and insert them into the skirt. Take multi-colored…
- Pobrania
- 515
- Polubienia
- 123
- Ocena
- 4,88
P
Printablesfmathieu360
Napkin holder
Simple napkin holder. I needed a holder for 15mmX15mm napkins. I had fun designing it in Fusion 360. The one that we had broke (Ikea) so I copied the design and adapted it to my needs. Print Settings Printer Brand: Creality Printer: CR-10…
- Pobrania
- 491
- Polubienia
- 87
- Ocena
- 4,7
P
Printablessoundbylaura
Thanksgiving Turkey Napkin Ring - Flat
skitch23's adorable napkin holders with a flat bottom rather than the ring/feet. I recommend printing one as a test to make sure they fit your napkins and then scaling as needed. Birds in pic are .2, 4 perimeters, 15% infill, ironing on.…
- Pobrania
- 468
- Polubienia
- 107
- Ocena
- 5
P
PrintablesPreston
Simple Napkin Holder
My gf wanted a napkin holder so I made her this one which has a semi-interesting design. Very easy to print as well. Print instructions print with the base of the napkin on the base of the printer, no supports, I recommend .2 layer height
- Pobrania
- 465
- Polubienia
- 71
- Ocena
- 5
P
PrintablesДмитрий Макаров
Napking holder
Printed with PLA plastic with wood filling. You can print with any plastic without supports. Printing on the Flsuns SR printer takes about 4 hours
- Pobrania
- 450
- Polubienia
- 163
- Ocena
- 5
P
PrintablesB3DGraphics
Napkin Holder
Small napkin holder for 105 x 105 mm napkins. Printed with the option “fuzzy skin”.
- Pobrania
- 449
- Polubienia
- 49
- Ocena
- 4,67
P
Printablesmatej
Air Ventilation Check Valve / Zpětná klapka do ventilace 125mm
Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…
- Pobrania
- 447
- Polubienia
- 79
- Ocena
- 5
P
PrintablesMaxT
Merry Christmas Gnome - Napkin Decoration
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
- Pobrania
- 440
- Polubienia
- 128
- Ocena
- 5
P
PrintablesSeemomster
napkin ring
The napkin rings have inner diameter 35 mm and a height of 25 mm. Two verisons: first one with an heart cutout second one without a cutout Print instructions The napkin ring with the cutout should be printed like this.
- Pobrania
- 433
- Polubienia
- 60
- Ocena
- 5
P
PrintablesPointNemo
Napkin Holder Voronoi Style
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Supports: recommended
- Pobrania
- 413
- Polubienia
- 78
- Ocena
- 4,5
P
PrintablesShan
Gnome napkin stand
Thought the gnome was cute. My partner got the great idea of turning it in to a napkin stand! Should not require any special print settings. I sliced mine with lighting infill which lowered the print time greatly. The model should be okay…
- Pobrania
- 409
- Polubienia
- 80
- Ocena
- 4,75
P
PrintablesDev-In Labs
Napkin Holder
Basic but clean modern design of a napkin holder If you like my design you can always Buy Me A Coffee
- Pobrania
- 407
- Polubienia
- 33
- Ocena
- 5
P
PrintablesThe Next Layer
Honeycomb Napkin Holder
A simple napkin holder, designed to be printed in place with no supports. I suggest printing with PETG for moderate flexibility, though as you can see from the picture, that will make it a bit more "boogery" Can be scaled up to fit your…
- Pobrania
- 405
- Polubienia
- 59
- Ocena
- 5
P
PrintablesDP design
Z fold napkin / paper towel dispenser
In the photos, the blue dispenser is the newer design with a bit thicker walls. There are now three sizes of the Z fold napkin dispenser uploaded: Napkin size 220x110, 60mm tall Napkin size 220x110, 100mm tall Napkin size 195x75, 100mm…
- Pobrania
- 400
- Polubienia
- 61
- Ocena
- 5
P
Printablesperfuzion
Valentine Heart Napkin Holder
I wanted a napkin holder for my Valentine's Day decor so created this double heart design. d Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: eSun PLA+ Red Category:…
- Pobrania
- 399
- Polubienia
- 95
- Ocena
- 5
P
PrintablesJoe
Winter themed napkin rings
Please be forewarned that I haven't printed these myself, and that they will require supports to be printed.
- Pobrania
- 379
- Polubienia
- 71
- Ocena
- 4
P
PrintablesKolifer
Tied the Knot Napkin Ring
Tying the knot? I've made some heart-shaped knotted napkin rings to share with you! Available in three sizes are stylized napkin rings, textured like a rope and shaped like a heart! Approximate inner diameter measurements are as follows:…
- Pobrania
- 375
- Polubienia
- 164
- Ocena
- 5
P
Printables3Dave
Cat napkin holder
Cat napkin holder, better size 18% from the project
- Pobrania
- 370
- Polubienia
- 102
- Ocena
- 5
P
PrintablesJakob Kerber
Napkin Ring
As stated above it is a ring for napkins, looks great if you have many napkins, for example at a birthday, it is very fast in printing, has basically no chance of stringing, and you don't need any support.
- Pobrania
- 367
- Polubienia
- 64
- Ocena
- 5
P
PrintablesAlwaysTalkingAboutMyDog
Salt/Pepper Grinder + Napkin Holder Centerpiece
A kitchen table centerpiece with space for salt and pepper grinders, as well as a napkin holder. STL and Fusion360 files are included so you can adjust the model to the dimensions of your grinders. There is a raised ring inside the…
- Pobrania
- 362
- Polubienia
- 81
- Ocena
- 5
P
PrintablesStasek
Dinner napkin ring
Druk: Prusa mini+.PLA generyczny, bez podpór
- Pobrania
- 352
- Polubienia
- 107
- Ocena
- 5
P
Printableshinand
Geometrical napkin holder
I made this napkin holder because the old one was broken. There are 2 designs available. A small one and a bigger one. I have just printed the bigger one for myself. The used napkins has the following dimensions: 16.5cm x 16.5cm (from…
- Pobrania
- 352
- Polubienia
- 69
- Ocena
- 5
P
PrintablesJohination
Gnome napkin stand REMIX 4cm width / Zwerg Wichtel Kobold Serviettenständer
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7
- Pobrania
- 351
- Polubienia
- 56
- Ocena
- 5
P
Printablesfixumdude
Swirly Shamrock St. Patrick's Day Napkin Holder
Spruce up your St. Patrick's Day table with this festive swirly shamrock napkin holder. Holds napkins or anything else you feel like placing within it. Sides A & B press fit together for me when printed on the Bambu X1-Carbon, but feel…
- Pobrania
- 350
- Polubienia
- 105
- Ocena
- 5
P
Printablesjofoeus
Leaf Napkin Holder
Yet another request to make a matching napkin holder for the soap dish and tissue holder. I made 2 models; a small one (_v1) with an opening of 60mm and a grande (_v2) with an opening of 120mm. I split the model in half so that I can…
- Pobrania
- 346
- Polubienia
- 120
- Ocena
- 4
P
PrintablesSouky1122
Christmas Napkin Holder Trees
Napkin holder with Christmas motif. Great for Christmas Eve dinner, or just during the Christmas season as a decoration on the dining table Printing instructions: The model is made of two parts that fit together. Each printer prints a…
- Pobrania
- 345
- Polubienia
- 81
- Ocena
- 5
P
Printablessh
🍁 Bent leaves napkins holder.
Info: bent leaves autumn design napkin holder
- Pobrania
- 335
- Polubienia
- 107
- Ocena
- 5
P
PrintablesToBeePrint3D
Anillos porta servilletas navideños (set de 3) Christmas Napkin Rings Set (Reindeer, Gift & Tree)
Dale un toque festivo a tu mesa con estos lindos anillos para servilletas inspirados en la Navidad. El set incluye tres diseños diferentes: 🦌 Cuernos y orejas de reno 🎁 Regalo navideño 🌲 Arbolito de Navidad Cada anillo tiene un diámetro…
- Pobrania
- 323
- Polubienia
- 135
- Ocena
- 5
P
PrintablesMattia
Paper napkin holder
Simple, plain, elegant paper napkin holder for 165mm square napkins . Feel free to use and change the Sketchup file however you like.
- Pobrania
- 323
- Polubienia
- 30
- Ocena
- 0
P
Printablesfixumdude
Snap Together Snowflake Napkin Holder
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
- Pobrania
- 315
- Polubienia
- 98
- Ocena
- 5
P
PrintablesKubajsxDD
dog's paw keychain (psí tlapka klíčenka)
dog's paw keychain (psí tlapka klíčenka)
- Pobrania
- 308
- Polubienia
- 23
- Ocena
- 5
P
PrintablesGREY
Napkin Holder Voronoi
It is assembled without glue using the spike-groove method (0.1 mm gap). It consists of 5 parts (2+2+1 ). The thickness of all parts is 2 mm. Assembly dimensions 13x13x13 cm. 0.2mm Layer height 2 Perimeters 3 Top/bottom layers 15% Infill…
- Pobrania
- 294
- Polubienia
- 72
- Ocena
- 4,5
P
Printablestecnoculebras
Peacock napkin holder to print in 3d or laser cut
if you like this napkin holder look at my profile I have several you can print in 3d or cut with a laser good luck and enjoy the impression CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
- Pobrania
- 294
- Polubienia
- 74
- Ocena
- 5
P
PrintablesDombi3D
Santa sleigh napkin ring / table decoration / Christmas tree ornament
Easy to print Christmas decoration. You can use it as a napkin ring (scaled down to around 60%) or as a round table decoration. If you want you can even hang it on as a Christmas tree ornament also.
- Pobrania
- 293
- Polubienia
- 37
- Ocena
- 5
P
PrintablesDonronchi
Snowflake Napkin Ring V2
Napking ring set with 6 different type (embossed) decorations for your Christmas or New Year celebrations. Print instructions Print at 0.2 mm layer height (5% gyroid infill is enough). I also recomend use ironing feature on Prusa Slicer…
- Pobrania
- 291
- Polubienia
- 53
- Ocena
- 5
P
PrintablesMentaPrints
napkin holder - MentaPrints
Following our standard of simple designs, we decided to put together a simple but aesthetic design for a napkin holder. There's not much to it but. Does there really need to be? If you like it, head on over to MentaPrints and check us out…
- Pobrania
- 278
- Polubienia
- 32
- Ocena
- 5
P
PrintablesBernd
Serviettenhalter / Napkin holder
Hallo, ich habe einen einfachen Serviettenständer entworfen. Er ist sehr einfach zu drucken. Es gibt drei Varianten. In Variante 2 hast du die Möglichkeit ein Feuerzeug und Taschentücher unterzubringen. Viel Spass damit. Bitte Bilder von…
- Pobrania
- 272
- Polubienia
- 38
- Ocena
- 5
P
PrintablesLucholent Design
Thanksgiving Napkin Rings: Pumpkin, Autumn leaf and 2 Turkeys
Add some holiday charm to your Thanksgiving table with these festive napkin holders! They come in four fun designs, a Autumn leaf, Pumpkin and two differen Turkey designs. Perfect for adding that extra touch to your family dinner setup. ✨…
- Pobrania
- 270
- Polubienia
- 78
- Ocena
- 5
P
Printablesfixumdude
Swirly Bat Napkin Holder
Sized for standard 5 inch napkins. The orange sample is printed at 100% and holding 6.5 inch napkins. Scale up to 130% like the black sample for use with 6.5 inch napkins (the napkins napkins in the photos) Prints in pieces without…
- Pobrania
- 267
- Polubienia
- 130
- Ocena
- 5
P
PrintablesRACBOTS
Servilletero - Napkin Holder
Servilletero cuadrado realizado para servilletas de tamaño máximo de 125mm x 125mm
- Pobrania
- 263
- Polubienia
- 29
- Ocena
- 5
P
Printablesneobobkrause
Spiral Napkin Ring Designs
Mix and match from this distinctive collection of spiraling napkin rings. Print a full compliment of 6 in the color of your choice on a single build plate. Or stir together your own unique collection, each in a different color. Short or…
- Pobrania
- 263
- Polubienia
- 34
- Ocena
- 5
P
PrintablesKrook
Napkin holder half the size
Model Remix of exopunks napkin holder. The original model was way too tall for my need, so i reduced the height to half the original model. ___________________ A simple napkin holder with a hexagonal pattern that should fit most common…
- Pobrania
- 263
- Polubienia
- 19
- Ocena
- 4,5
P
PrintablesBram Elema
Fireplace Napkin Holder (collapsible)
I used a buckle clip style design to make the model collapsible. (see third image) The flames are designed to be friction fit but I also used a small amount of glue just to be sure. Print settings: I printed all parts with 0.2mm…
- Pobrania
- 262
- Polubienia
- 121
- Ocena
- 4,67
P
Printablesenriverd
Napkin ring (Servilletero in spanish)
Napkin ring (Servilletero in spanish) This is a napkin ring with a customized name engraved on it. The 3MF and STL files have my own name engraved (Enric). I know, i know, your name is probably different, so I'm including the Fusion 360…
- Pobrania
- 260
- Polubienia
- 26
- Ocena
- 4,33
P
PrintablesHMANIFACTURE
IS-2 Soviet Heavy Tank Snapkit Edition
IS-2 Soviet Heavy Tank Snapkit Edition Introducing my new vehicle series: QUICK-BUILD! No AMS, no Glue Scale 1:48 Custom easy to remove CAD supports Total printing time only +-8 hours Total filament usage only +- 90g Model has rotable…
- Pobrania
- 251
- Polubienia
- 53
- Ocena
- 5
P
PrintablesClay_47
Napkin Holder "Eisberg"
Just another Eisberg Napkin holder, but made this with thinner walls (strong enough)... Print settings: 4 walls 4 top/bottom layer 15% infill Happy Printing…
- Pobrania
- 250
- Polubienia
- 74
- Ocena
- 5
P
PrintablesJT3D
Pack de 12 ronds de serviettes de Noël - Pack of 12 Christmas napkin rings
Epaisseur 5 mm Hauteur 7/8 cm Diamètre du trou 4 cm
- Pobrania
- 249
- Polubienia
- 30
- Ocena
- 5
P
Printableschuyskywalker
Cat Napkin Holder
This remix of the fun cat napkin holder adds a strong support base, fixes the non-flat bottom, removes the extreme overhangs, and rounds out all the edges for a nicer print and touch experience. The included Fusion file has custom…
- Pobrania
- 248
- Polubienia
- 50
- Ocena
- 5
P
PrintablesRuy Curado
Napkin Holder for Christmas
Special napkin holder for the holiday season. Customizable with name and event. Print instructions After printing both parts, just fit and glue one into another.
- Pobrania
- 245
- Polubienia
- 65
- Ocena
- 5
P
PrintablesOxa
Napkin holder. The mountains
Mountains and forest are inserted into the grooves of the stand
- Pobrania
- 240
- Polubienia
- 82
- Ocena
- 3,86
P
Printablesmaarten
Ikea Fantastisk napkin holder
Prevent your napkins from flying around. Do not use supports otherwise you will not be able ta add the lid halfway the print You have to print the lid first. If you print the box ad a pause halfway so you can add the lid (see pictures). I…
- Pobrania
- 238
- Polubienia
- 35
- Ocena
- 0
P
PrintablesLucholent Design
Christmas Napkin Holders: Gift, Tree, Santa Hat and Reindeer
Add some holiday charm to your Christmas table with these festive napkin holders! 🎁🎄 They come in four fun designs, a gift box, Christmas tree, Santa hat, and reindeer antlers. Perfect for adding that extra touch to your holiday dinner…
- Pobrania
- 237
- Polubienia
- 65
- Ocena
- 5