Counting matching models…
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
Allows your Paralenz Vaquita to be mounted to a GoPro mount. Requires 2x stainless steel m6x16 cap screws and nuts. Printed in Petg at 0.16mm layers hights. Printed with 100% infill
paralelní vedení pro horní frézku bosch POF 1400 ACE použití na vodící lištu makita s jemným doladěním drážka 16mm lze upravit červíkem šroubem m3 vzdálenost frézování od kolejnice se nastavuje pomocí šroubu M10 - jedna otáčka 1,5mm…
Those are made for 33mm wood tube. You will have to force with a hammer to make them fit. So there are no screws required. For 2 paralettes, it's 4 times the same part. No need of suport You can add grip at the bottom for indoor use Print…
English below Dieses Tool ist ein Remix. Schaut euch auch das Original an. Die Auflagefläche des Unterteils ist für mein Vorhaben zu dick und habe es daher auf 7mm verjüngt. So liegt das Lineal nicht mehr auf der Arbeitsfläche auf und das…
Clamp 2 2020b profiles in parallel together. Push the element into both T-slots and tighten the screw. The 3D printed variant is capable but may not block parallel movement of profiles, the CNC machined variant may be used as normal…
paralelní vedení pro horní frézku s tyčemi D9,5 (3/8") použití na vodící lištu makita s jemným doladěním drážka 16mm lze upravit červíkem šroubem m3 vzdálenost frézování od kolejnice se nastavuje pomocí šroubu M10 - jedna otáčka 1,5mm…
Simple Printing Pring Prusa Core One fimware 6.4.0 and tensioned belts 92 and 98 hz, visible improvement in VFA distortion Novinky v PrusaSliceru: Konzistentní kvalita povrchu tisků a eliminace VFA - na CORE One i na všech ostatních…
Diameter wooden handle: 25 or 30mm. Setting the fill to 20% and the pattern fills the gyroid without supports. Material : PETG. Layer height : 0,2mm. Carrying capacity : 90kg.
paralelní vedení pro horní frézku bosch GOF 1600 s 3/8" tyčema k použití na lištu makita s jemným doladěním drážka 16mm lze upravit červíkem šroubem m3 vzdálenost frézování od kolejnice se nastavuje pomocí šroubu M10 - jedna otáčka 1,5mm…
This is an experiment at designing a paralette based on a 40mm diameter wooden stairs handrail (40.5mm opening). There is a flat side of about -3mm. I say this is an experiment because it almost gets to be more expensive in plastic and…
Clamp 2 3030 profiles in parallel together. Push the element into both T-slots and tighten the screw. The 3D printed variant is capable but may not block parallel movement of profiles at very high forces unless printed from reinforced…
A paralette with 10 rounded spikes for a strong hold when doing outdoor workouts on grass/dirt/soft underground. (eg. the backyard, forest, park) Printing Infill: 15-30% Layer-height: 0.2mm Supports: yes Remix of:
Description Clamp 2 4040 profiles in parallel together. Push the element into both T-slots and tighten the screw. The 3D printed variant is capable but may not block parallel movement of profiles at very high forces unless printed from…
Simple space saving disks that transform a dumbbell shaft into a paralette. Available in two sizes, short that prints in approx. 1h per piece (but might be too low for some) and tall ones with more breathing space. The design is rather…
Power bank box built for 65w /100w board with 18650 / 21700 batteries up to 5S In the STL archive you will receive files for printing 4s and 5s boxes, where the length is different. You will receive files with and without holes for…
A paralette with 10 rounded spikes for a strong hold when doing outdoor workouts on grass/dirt/soft underground. (eg. the backyard, forest, park) Printing Infill: 15-30% Layer-height: 0.2mm Supports: yes Remix of:
Power bank box built for 65w /100w board with 18650 / 21700 batteries up to 5S In the STL archive you will receive files for printing 4s and 5s boxes, where the length is different. You will receive files with and without holes for…
Print 2 bases, 2 pulley supports and 4 pulleys. Use 4 m3 screws and nuts to hold pulleys together. Glue the bases with superglue.
