Counting matching models…
Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
100% Infill
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities
Author: Unknown Print instructions Print takes roughly 30 minutes (15 minutes on the MK3) at 200 µm layer height.
What, I finally linked to the video? Haha, I said I would. Eventually :)
██████╗ █████╗ ████████╗███╗ ███╗ █████╗ ███╗ ██╗ ██╔══██╗██╔══██╗╚══██╔══╝████╗ ████║██╔══██╗████╗ ██║ ██████╔╝███████║ ██║ ██╔████╔██║███████║██╔██╗ ██║ ██╔══██╗██╔══██║ ██║ ██║╚██╔╝██║██╔══██║██║╚██╗██║ ██████╔╝██║ ██║ ██║ ██║ ╚═╝…
Introduction I've created this C-Clamp (or G-Clamp if you like to call it this way) because of three reasons. For my upcoming enclosure build I'll need some clamps to hold parts together. To train my Fusion 360 skills I've never printed…
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 122 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…
Enjoy the original Batarang!
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 124 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
Join here to get access: https://www.patreon.com/kogi3d Hey everyone! A brand new STL file is now available for you – an articulated tarantula with smooth joints and a wicked cool design. Perfect for your next 3D print! License Notice:…
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…
No support required any infill Please print in black.
This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…
The largest part of the ship is used to test whether your printer can print the entire model. Printing takes more than 30 hours and it is necessary to place suitable supports in it. This is the biggest (test part) of FOSS which is…
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
This is based on the original thing by ChaosCoreTech and the subsequent remix by Cyphn . I was not quite satisfied with the stability of the core/logo mechanisms in either the original or remix and decided to rework the model so that it…
A quick and straightforward print to test your 3D printing clearance / tolerances.
There is a new version available here . A simple tester for your printer tolerances. Start with the normal file, if you cannot break out any of them, than you can print the other file, which has bigger/looser tolerances. When printed, try…
This is my custom Mandalorian helmet based off the character Aran Tal from the new Star Wars game, Star Wars Hunters
Are you a joke lover? Welcome to the right place. But maybe you are exaggerating with this... However, this is the best way to give your wife / girlfriend a heart attack. If you print that the right way, i'm sure they're gonna hate you.…
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…
Author: Unknown, remodelled by Prusa Research (Vlado Turek)
The most accurate Batarang from The Dark Knight that you will ever see.
Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…
Enjoy the original Batarang!
Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…
I design for Prusprinters two parts : the batman's batarang with the 2022's logo the batman's batarang of the 2022's suit You can print the first one in 1 only part. For the second, just print it in double and add 2 little "assembly part"…
Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.
Step into the world of high-stakes adventure with my 3D printed Balloon-Powered Boat - a vessel that not only boasts a sleek design straight out of a James Bond movie but also features an easy inflate function for instant action on the…
Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )
First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…
Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…
Here's a Batarang design inspired by a wallpaper a friend found online. For optimum Batarang look, I'd recommend printing it twice and gluing them together (that's what I did for the one in the IRL picture and what is illustrated in the…
Here's my version of the Batarang prop from the Arkham Knight game. Category: Props
This is a remix of the MiniZ Ford mustang 1967/68 fastback (sportroof) body . I cut out additional clearance for the front and rear wheels in order to allow better steering and suspension travel specifically on the Fully Printed 1:28 Car…
Batman's Batarang Print instructions Batarang
This model replaces the lower arm and hand of LUCKY 13 and can be printed upright without supports, though a raft is recommended. Remixed from Reticulum_Infirma64 's “Samus Aran's Arm Cannon” model: https://www.thingiverse.com/thing:4715334
SeaRescue Catamaran – 3D-Printed RC Boat (Mostly Functional, Occasionally Janky) What You’ll Need (V1 - Above-Water Propulsion): Motor: A2212 brushless motor (other sizes might fit too) Servo: 9-gram servo for steering Prop: 8045 or 8060…
Batarang magnet for 5.9mm magnets! If you have another size of magnet laying around and want to make one of this, send me a message and I`ll change to your specific diameter! Design video with Fusion 360!…
Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…
I wanted to create an exciting solution of a pen holder on my office desk. There I need just one pen which I wanted to give the respective ambience. Perfectly fitting to the vision in my mind I found the spider model of Jason C Kessler.…
All informations are included in "manual" pdf BOM: 5mm carbon or glass fibre rod 4mm carbon or glass fibre rod a lot of m3 screws and nuts m3 inserts copper wire 05, 1 and 2 mm diameter and solder sailcloth How I Designed This Category:…
Recreation of batman's batarang as cool accessory for comic fans NOTE:FOR HUGE WALL MOUNT KEEP IT AT 100 FOR HANDHELD SCALE DOWN AROUND 25-30%
The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…
If you don't have Homey and still would like to print Marvin The Paranoid Android from the Hitchhiker's guide to the galaxy this thing provides you with a head, neck, visor and eye lids. Bottom part of the head and neck attached to the…
Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…
This is a remix of the clearance gauge by Lost In Tech with the addition of an 11mm peg version for 0.6mm printers. I also changed the text from embossed (raised) to debossed (indented), added a small chamfer to help reduce elephants…
Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…
This model requires a 6mmX8mm cylindrical Neodymium magnet to be inserted during the last few layers of the print. Pause and print was not necessary and the magnet could easily be inserted during a running print. It is recommended to…
This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…
Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…
Batman's signature weapon, the Batarang. This is based on Tim Burton's 1989 folding Batarang from the movie. This was my first time modeling with surfaces in Fusion360, it was a challenge, but worth it. Getting the lines to flow like the…
This is a model for the batarang used in batman Beyond tv series.
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
I designed and made this for our godson. Place blown up balloon on top chimney and watch it go. Makes for a nice bath toy even if you don't use the balloon propulsion NB: photos and video are of the old version. The uploaded model is new…
Ivan Maranda`s Tiny CNC MK2 2080 Remix Issue 1. Ivan Maranda has created a awesome 3D printed Mini CNC machine that cuts metal. This mini machine is perfect for my needs and provides me with many modding opportunities. Initially I really…
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
A BATMAN GADGET EASY TO PRINT ( NO SUPPORTS!) PRINT SETTINGS: LAYER HIGHT 0.2 FILAMENT 1.75 DARK PETG NOZZLE 240 BED 65
This is a Clearance test that should be fast and should not consume a lot of plastic. This should take less than 10 min with 0.2mm L.H. 50mm/s and less than 2 Grams of plastic. This is measuring clearance from 0.05mm to 0.5mm. I had to…
Flexi Batman Batarang - Tutorial video on how to make articulated flexi models: # part 1: https://youtu.be/A5BKspVaVlc # part 2: https://youtu.be/ZsWuDuu2heY Consider following us in social media!…
Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…
My son loved the Balloon Boat designed by K-eye, but I wanted to make it faster and more stable. This lead to the idea to modify it into a Catamaran. Two hulls leads to increased stability and two balloons means twice the power! This can…
Update: the first version was a bit small and clearance between the two halves was too tight so I've uploaded a v2. May fit on other saws, but based on measuring the stock cover for a Delta 36-725 T2. Around 3-¾" x 15-½". 2 pieces to…
Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 122 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
Here's my version of the Batarang prop from the dark Knight batman movie. Category: Props
A hook for Ikea Skadis board.
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
A zero clearance throat plate for an old portable craftsman table saw. print the pieces as they are laid out. The plug end for the hook is deliberately tight to get a snug fit after a small amount of sanding. Print instructions Print…
barandilla finger board recomienda hacerlo un poco mas grande de las medidas originales del modelo o al gusto
Saint Seiya - Taurus Aldebaran gold saint
I quite like this Tolerance Test by 3DMakerNoob but sometimes I like to add notes directly on the prints when doing some setting tests. The original model shape was too limiting due to all the curves so I simply filled it. Material…
Each of the eight legs is multi-segmented with ball-and-socket or hinge joints, allowing the spider to be posed in a "creeping" crawl, a defensive "threat pose," or draped naturally over the edge of a surface.
Batarang from the Arkham game series. Designed to be folded up, as they do in the game This was my first ever attempt at designing something to be 3D printed, from about 4 years ago now. It needs updating, as I don't think the folding…
Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…
Update Additional model for 16.4mm - 17.5mm grooves (fits Bosch GTS X10). (In case your groove is only marginally smaller, i suggest to manually grind it off) Idea Above the final miter runner the cross cut sled will be placed which will…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…
Halloween super realistic tarantula spider - high quality
This Mini Whistle weighs in at just ~1 gram yet delivers a genuinely deafening 115 dB , verified using a decibel measuring app (as shown in the test screenshot). Small enough to disappear in your pocket or on a keyring, it's a functional…
This is a container for 150mm/6in dial calipers that gets them as low as possible without laying them on their side and taking up extra horizontal space. I had to leave out one of the magnet holes to make room, but the other 23 should…
Creí necesario realizar una ligera modificación, que las hojas del arma se movieran sincronizadas. Todo el diseño ha sido realizado en onShape. I thought it necessary to make a slight modification, that the blades of the weapon move in…
I could not find a zero clearance insert for my 2023 Metabo KGS 216 M as the old versions differ. I have included both the entire model as one piece and a version consisting of 2 parts for printers with a smaller print volume. Print the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is Batman's batarang, featuring a…
