Counting matching models…
there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
Important: Please check the pictures how to change the print settings for a successful print :) There will be an imprint on the first layer, for that you have to place the surface on the bottom and set an outer rim of 15mm. With those…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Small cover of shareable cigarattes When you dont want smoke alone. Hygiene precaution while pandemic situation. Print it for everyone! Second version 1.2 -bigger hole for spliff Third version 1.3 -longer version -better design for…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
This is a case that holders about 14 cigarettes as well as a standard bic lighter but also can be mounted with an airtag to make it easy to find if lost or stolen
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
Design and very well functional box for an 100's cigarette box (58 x 23 x 103 mm). Neodymium magnets 8 x 3 mm are used. The magnets are glued by super glue. The design is made for heavy use and long life. I also made a design for a very…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Smoking is bad for you, so they keep saying. I'm not getting any younger and should probably stop. Which is difficult at the best of times but even worse if you're still enjoying it. I smoke roll-ups. Problem is that if I have the tobacco…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for PETGSource material: PET
Pitch: Is your friend, coworker, or family member smoking? Would you like them to stop? It's easy! Just replace their smokes with these revolutionary therapy props. They will totally not hate you! Why did I do this?: No seriously, I made…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Wave keychain. Can also be use for a cart.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for one variant
Jednoduchý a funkční držák na karty Karak který se vejde do originální krabice.
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Portaretrato con pajaros listo para fotos 4x6
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Hello, I have Jesus Christ of Nazareth for you. It is a really poignant masterpiece. Exactly according to the Bible ! :-) It is suitable for display in a prayer room. The printing is not demanding! Good luck with the printing! I used PLA…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
Cigareta pevně stojí na stole ve svislé poloze. - The cigarette stands firmly on the table in a vertical position.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Dva druhy krabičky na klasické prší karty. Krabička má výsuvná dvířka. Singl box je určený pro jeden klasický balíček 32 karet. Duble box je určený pro dva balíčky, dohromady 64 karet.
Print approx. €3.59–€4.38 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Un semplice supporto a parete per smartphone con mega cover con porta usb per la ricarica rapida e il trasferimento di dati A simple smartphone wall mount with mega cover with usb port for fast charging and data transfer Custom Section…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
Vnitřní část aretace střechy houpačky. Nutno vlepit matku M8, nejlépe pojistnou. Zajištění do rámu houpačky 2x samořezný šroub Návaznost na díl: https://www.prusaprinters.org/cs/prints/83514-aretting-roofs-on-swing/comments
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for PETGSource material: PET
Wireholder for my mobile e-cigarette toolkit I carry with me. I buy wire for my atomizers on 500g spools. This holder takes some meters of my main wires I use for maintaining my atomizers.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder, to screw a card reader to a piece of furniture. Jednoduchý držák k přišroubování čtečky karet k nábytku.
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
My Pelsee power supply broke when the plastic piece that holds the fuse in place cracked. I designed and printed a replacement with PETG .10 FAT DETAIL setting in slicer.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
This is a new and upgraded version of the black cigarette holder, featuring a USB-C connector and a button. You can also print a version without a button. Shop:…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Lighter and Cigarette or Joint Case Introducing BlazeGuard: the ultimate solution for discreetly storing your essentials with an added touch of satisfaction, now your ideal companion gadget for every picnic, barbecue, or tracking and…
Items should import in the correct print orientation. Glue the base to the sleeve to complete. Allow glue to dry before insert sleeve. Ensure enough perimeters so no infill is required (solid print).
The source marked this model as adult content.
Print in place, sideways. Use some 1.75mm filament for the hinge. No supports needed, bridging should work for you. Other logos or texts on request. Stopp Smoking!
3D Printed Cigarette Dispenser (upto 30 standard 8.5cm cigarettes) Watch the video: https://youtu.be/-W0srrSoo7A Based on the wooden version I saw at Youtube, I designed a 3d print model myself using Tinkercad. Main parts are composed of…
Easy printable without support. Cigarette box case 36 versions 9 sizes in 4 designs for 8 cigarettes sizes Designed for 0,15mm slicing and print. 9 different sizes in 4 versions. Use random seam. Model A…for 10pcs superslim long…
In the picture you see some letters on the front, these are not included in the STL file. Printed details; PLA 0,4 nozzle 0,2 Layerheight
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Ferrari F40 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
The source marked this model as adult content.
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Supra MK4 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della Supra…
Took the really nice design by andrewSORG and fixed the interior so the hole gets thinner. This way it can easily hold slims. Category: Props
Designed for 0.15mm slicing and print. Version A… for king size cigarettes 84mm long and diameter 8mm Version B… for king size cigarettes 100mm long and diameter 8mm AB1… Cap for boxes Inside box dimensions 62x23.5x85(or101)mm. Seconds…
This model was recreated based upon user Laurens model “ cigarette container with lighter” - but I wanted one to hold a full sized lighter and 100 sized cigarettes. I also wasn't overly fond of the amount of threads on it. I went back to…
I only found one model on thingiverse by Lenry. Didn't like the fit and finish and was only 90mm. (https://www.thingiverse.com/thing:228267) I took his design and made it better for my use which is becoming more common in the USA.…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Porsche 911 GT3 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
A small and convenient case that fits 100mm cigarettes well! I've included the STL files and use variables almost everywhere to make adjusting the sizing as easy as possible if you want a larger or smaller case, or want to add your own…
Multifuncional case This case design is inspired by Prusa style and motto: Everyone is a maker, only I am a printer PRUSA It fit self-rolled cigarettes, to fit regular size cigarettes you can just scale it to 114% in every direction. The…
A very simple cigarette holder/box! This is needed to my wife, but I can't find a proper one for her, so i make one... --- It can holds up to 21 piece of death sticks! :) Nice, clear design… No fancy stuffs! --- I make a second cap for…
The source marked this model as adult content.
The prints with no support.
This is a remix of FFF droid here which fixed some issues with the feet fitting properly. Follow the instructions in the included PDF. You will need several M3 screws and nuts as outlined. Enjoy Print instructions Category: Model Robots
Zigarettenboxen mit verschiedenen Stückzahlen für Selbststopfer. Unterteil gedruckt aus ASA, Oberteil (Deckel( gedruckt aus TPU.
Aretes en forma de silueta de Barbie. Para imprimir a dos tonos (Preferibe blanco y rosado. Disfrutalos - Enjoy
Da ich sehr lange auf der suche nach einer Zigarettendose war in die ich auch Gestopfte Zigaretten bekomme, allerdings keine fand setzte ich mich selber ran und Baute diese. Meine Ideen dafür habe ich aus Verschiedenen Foren und von…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Porsche 911 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Ford Mustang GT500 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico…
modified the machine for 70mm cigarettes, also made a flexible tube from flex suitable for convenient rolling of a cigarette, I recommend printing it with a 0.4 nozzle with a layer height of 0.2mm, I used Flex from the Russian…
The travel tube, fitted with a o-ring to keep keep the bad smells away from people and any water from entering the tube. Perfect for a hiking trip or going to the sea. O - ring dimensions: 18mm (inner diameter) 2mm height
Just a simple cigarette trick design I saw online and recreated for 3d print. Watch the video:
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della NISSAN GTR R34 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
Lotus flower earring cutter for polymer clay, cookies or crafts-Cortador en forma de arete flor de loto para arcilla polimerica, galletas o manualidades
Everything was printed on Ender 3 V2 using PLA. Case 0.28 mm, variable layer height on top where the lid goes (0.08mm). Lid 0.2 mm, mainly because of the text, should be good on 0.28 also. Lid - Posty: Contains lyrics from Post Malone's…
This is a 7 Cigarette container with a slide cap. The box should be printed in PLA and the cap in ABS for smooth slide! Note that if both are PLA the cap slide does not work properly (too stiff). The assembly of the cap is made by forcing…
Cigarette Splitter that makes it possible to smoke 4 Cigarettes at once. Smoking is incredibly harmful to your health and can lead to serious and life-threatening conditions. Avoid smoking at all costs. If anyone has any questions please…
---------- UPDATE AUGUST 2023 ---------- Added a printable O-Ring by @Das_Enzym_395842 Print it in a flexible filament like TPU. -------------------- Capsule for special cigarettes. Remix of "The Desperado | Waterproof Keyring Capsule"…
I always struggled to find a practical solution to carry all my cigarette rolling paraphernalia in a single container. Here's a box that carries your herb grinder, cigarette papers, a lighter, all your tobacco and other material and even…
My machine was broken so I redesigned all the parts. I provide all the .3mf files with the settings that worked for me. All the plastic parts are printed in PETG/PCTG except the tip which is in PLA+ I re-used the Ø1.5mm axis and the…
cigarette box that can hold up to 21 cigarettes and 1 lighter from the brand Bic. print in place hinge support required
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! Bienvenue a Maroc! This model was designed by Dany Sánchez . The Minaret of the Koutoubia Mosque is the landmark of the Moroccan city of Marrakech. The Koutoubia (or Kutubiyya ) Mosque is the…
Why only smoke one cigarette, when you can smoke 25 packs at once. Yes you heard right you can smoke 500 Cigarettes at once. The only requirements are a printer that has at least a print volume of 255x230x160 and you need about 550 gramms…
This case holds 7 cigarettes and stays closed with your lighter so you can never forget it or let anyone else sneak away with it. Video of use at: http://www.youtube.com/watch?v=z_7IOiW9T58 See more at: Instagram: @3DBrooklyn…
For the hinges you need 1.4mm thick nails . I've had them lying around, idk how common they are. Mine are 25mm long, thats a bit too long, so i snapped the head (and a few extra mm) off.
Porta retratos personalizable de diferentes tamaños 50x70, 70x100 y 100x150. El porta retratos tiene dos orificios (10 mm de separación) para insertar símbolos nombres etc y personalizarlo. Customizable photo frames in different sizes…
I decided to redo my model a little - change the latch. For some reason I can’t print it properly. I also added one more ornament option.
Cigarette box for everyone hating the new images on cig packs law. Has a Monster logo on it, If you don't want it, remove it or put there your own in Onshape Post-Printing If your box doesn't fit, sand it down, just don't sand off the…
Червячок с сигаретой, сделан в blender с использованием ии в качестве основы. A worm with a cigarette, made in blender using AI as a base.
I wanted to be able to use GLeZz's cigarette trick box without having actual cigarettes so I made a prop one and a one-third length one for it.
For slim cigarettes with 5mm diameter and 100mm lenght. Use 0.15mm print with random seam. Inside box size 54x12x101mm.
The source marked this model as adult content.
Just separated for those who does not have CAD software
A simple cigarette case. Uses filament as the hinge so no other hardware required. Simply cut a length of filament, melt one end, slide it in and use a hot knife or blade to melt the other end. Print in any material. My personal favorite…
A box for 18 cigarettes, printed in 2 parts. The box is a replacement for a standard packet of cigarettes, best for smokers which roll their own cigarettes. There is a benefit: a divider in the middle of the box. This divider keeps the…
Slide to open cigarette box with The Witcher motive.
Porta stile e passione automobilistica nella tua casa con questa elegante wall art della BMW M3 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della BMW M3 in una…
Cigarette / Joint Holder and Ashtray Short holder / Tall Holder attach to the ashtray base via 3x6mm magnets (or you could just glue them together). Magnets also can be added to the base.
needed a case for my smokes when i switch to ryo. Any modles i could find were either not robust enough for my lifestyle or would allow the tobacco to shake out of the tubes during the day. couple this with my other model (butt-hole) and…
I designed this Cigarette Box in SOLIDWORKS (29/05/2023). The box consists of 3 parts, that are orientated for convenient printing without supports. Cigarette Box_body Cigarette Box_lid Cigarette Box_pin (may need to scale by more or less…
When using an O-ring(Outer diameter 28mm Diameter 2mm), it is water-resistant. In the example photo, the slicer is used to change the color of the top part of the body.
Porta stile e passione automobilistica nella tua casa con questa elegante wall art della NISSAN GTR , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della NISSAN GTR in una…
Needs 2x M3 screws 12mm.
Portaretratos. Picture frame Consta de dos piezas, el cuerpo y la tapa, la tapa contiene una ranura por donde se inserta la foto, y esta pieza se inserta horizontalmente por la ranura del cuerpo. It consists of two pieces, the body and…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
Fake cigarette props for costumes and cosplays. Based on the original dimension of a regular (74mm) and a long (84mm) cigarette. AMS needed but your can cut my model and glue it if you want.
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della BMW M2 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della BMW M2 in…
For the hinges you need 1.4mm thick nails . I've had them lying around, idk how common they are. Mine are 25mm long, thats a bit too long, so i snapped a few mm off. I printed the case with Bambulab PLA-CF, only the hooks are printed from…
slightly different from https://www.thingiverse.com/thing:2715380 , space for 17 tube cigarettes (ocb) (8.2mm) printed with woodfill (layer 0.2mm) and copperfill (layer 0.1mm) shaft used dia:1mm (hole 1.4mm) magnets 3mmx1.5mm tip: if you…
This enchanting sculpture captures a whimsical scene: a small figure standing on a ladder among clouds, gently touching the face of a serene, smiling moon. Designed in a soft monochrome palette, the piece combines surreal charm with clean…
Cigarette case I designed that has a slide on lid. Holds approximately 22 rolled cigarettes. There are 2 designs of the main body, one is plain and the other has a heart shaped rose. Both are the same size so the lid will work with either…
i remixed the customizable ashtray from here: http://www.thingiverse.com/thing:316440/ i just added an extinguisher to the center. works like a charm and makes the ashtray much more durable, because of less contact with hot ash. the…
Ive printed quite a few cigarette cases that ended up not being the right size or not very durable with hinges in pla so I decided to just make one myself. Holds 18 king sized ryo cigarettes with dividers to keep them from moving around.…
