574 models
Quote from the artist Amao Chan When the film spreads through the webs, it shows that a plastic straw pulled out from the poor turtle's nostrils, which used its misfortune to slightly change the world. Many people have begun to take the…
Print approx. €10.65–€13.02 excl. taxPreliminary estimate for one variant
This is a slightly bigger version of my artisan keycaps case, which can found here: https://www.printables.com/de/model/136360-artisan-keycap-display-box Each spot is 19 x 19 mm and is printed in PLA layed down with no supports. Layer…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
V.2 Updated - Adjusted the stem to 4mm width and added chemfer -------------------------------------------------------------------------------------- This is a simple 3 * 4 artisan keycaps storage box with cover. I printed the cover with…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
General Information: This is my version of a proportional divider / scale tool for artists. This tool is essential for accurately replicating the correct proportions from real life to paper/canvas. It has a modern and simple design. The…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
7 in 1 - Artist Multipurpose Tool Features : Scale 60mm Sharpener Pencil Holder Eraser Holder Fixed Angle Protractor - 60° / 90° / 120° / 135° Golden Ratio Stencil Keychain! Print Parameters : Layer height - 200um / 0.2mm (100mms Linear…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
I wanted to create a special cake decoration for my dad birthday. He is passionate about painting, and therefore i wanted to make something awesome for him. The palette is also usable, as a small one for painting miniatures. Printing the…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This is a clip that attaches to an XP Pen Artist 13.3 Pro and allows you to clip your pen to the tablet! I created this after seeing that the newer Artist 22 Pro comes with a really handy pen clip and wished I had one. It just simply…
Print approx. €0.90–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
The Cuddlefish model is from Foppemoa's Subnautica Cuddlefish and it is heavily modified in Blender. Printing Suggestions I suggest a very low layer height to maintain the detail and to get a nice finish on the print. I used a varying…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A simple print I've used 15% infill
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
I made this soap dish about 3 years ago of a model on Thingiverse . I've waited for the designer to import it here, but that hasn't happened. I think it is a very good design that needs to be shared here.
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Guten Tag zusammen, die Mutter einer Freundin hat mitbekommen, dass ich jetzt neu seit ein paar Monaten einen 3D Drucker habe, den ich gebraucht auf kleinanzeigen gekauft habe :)! So freut es mich mit diesem “weiter-verwendeten” Drucker…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
Table tennis net holder pad for Artis table (likes to get lost) is used to protect the table from damage.
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
It goes on the front of the metal on the bed. There is a square hole for custom mounts. I forgot about the enclosure door though so it is perfect for those without the enclosure. It wont damage the door, just open it every time it goes to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
A beautifully designed contemporary cat sculpture that fits perfectly into any modern home. A great gift for any cat lover. Looks best when printed in matte black. Can be scaled to any size but should have enough depth in order to have a…
The pre-painted multicolor version for the AMS is available here: https://makerworld.com/en/models/112578#profileId-120559 This version doesn't have enough clearance to be used on all keys, so keep it to a corner if you can. I have a…
Its a 3d Nameplate for your office desk. Simple but very attractive design. No support required for print. Made on fusion 360, file attached for customization. Print Resolution: 0.2mm, No Support required, infill 25-30% Print Settings…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating. There are two versions: KKb - using of stock metal bracket (still can face overheating). In this case one pin on the bracket should be…
for building instructions please see https://youtu.be/8ReAR9MRtXU, although this one pretty much explains itself…
Just a standard light switch plate/cover. Print instructions Print at 0.25mm (best for color switching) with the hexagon design laying flat on the build plate (no supports). If you want a dual-color design, use MMU or switch filament at…
This is a remix of the Artis3D KKm extruder with simplified BOM, adjusted tolerances, and using bigger (4.6mm-5mm OD) heat inserts. It is also compatible with the LDO 36STH20-1004AHG motor (10-tooth version), that offers increased output…
Kitchen Aid Artisan Halterung für Knethaken, Schneebesen etc. Infill 42% Befestigung: 4x35 Panhead Schrauben Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a Like
This is an upgrade of my original design for folks that have a large 300x300+ build volume and want to print the entire panel rather than attach a pegboard to one. (See my original model here: ) I tested the thickness of the panel with 3…
This is a feeder for Creality K1/K1MAX which is based on BMG extruder gear set. This feeder in lighter than original K1's and has adjustable rocker tension. There are 4 variants: * MK - for 10-teeth NEMA14 motors * MKe - same as MK but a…
Like & download if you want to support me! :3 (Download now, print later!) You know that culture!
(SF bolt checked: works with the SF bolt ) this model is designed for the MKII version of the FGC6 but it should also clear the MKI model. also a note this folding stock is compatible with the FGC6SF models credit note: most parts in this…
Design Concept The Organic Chess Set is a harmonious blend of nature and art, each piece representing a unique character with intricate details that capture an artistic design while remaining functional for play. This STL is an organic…
A blend of artistic freedom and realistic representation. Voronoi is used on the back (or front) of the pot leaf. When the light comes through, the whole thing blends together. Flat, very easy print, use nozzle 0.4 and layer thickness…
This is a pegboard designed to be used with artist alley displays at conventions and markets! Included in the files are 3 versions of the pegboard: A large 280x280 version which fits on my Artillery Sidewinder x2 and nearly covers the…
I needed a small artisan keycaps case with a sleek design. So I created this for holding 6 keycaps in a row. Each spot is 19 x 19 mm and is printed in PLA with a color change. Support: Yes, they are needed for the slant The design is…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Helps you look at your art and make decisions about colour and composition
This is an updated version of the feeder for Creality K1/K1MAX which is based on BMG extruder gear set. Changings in Ver.2: - more convenient unclencher - both 10t/12t motors supporting - closed body (more simple) - fixed some errors…
When you suffer from arthrosis, like myself, a finger splint can bring some relief. But most splints in the market are ugly, stupid and way overpriced. Also: they come only in standard sizes and are far from comfortable. So I decided to…
1 You'll need a bit of glue to secure the spikes. 2 Before you print the whole thing, do a quick test print to check how the parts fit together. It should only take about 5 minutes. I've included a file called JointTest for this. 3 If you…
Christmas tree toy in the form of a symbol of the year 2026
Simple stand for XPPen Artist 12 Pen Display. Additionally it is recommended to use non-slip stickers.
Installation steps (see images): Remove the rail end (two screews, pink wrench). Move the rail with module two slots back on the platform (green wrench). Slide in the extension piece. Secure it in place with M4x14 screews (same as the…
3003 Fantasy Bits Mega STL Collection on Kickstarter 📢 Earn Money with 3D Printing – Get a Commercial License for My Vase Models! 📢 Do you have a 3D printer and want to start making money? Or maybe you run a shop selling 3D-printed items…
A simple tool for combing out the cutting scraps from the Laser Bed of the Snapmaker Artisan. Designed to be flexible and quick to print, prints in about 6 minutes. Made with Onshape: Source CAD: Snapmaker Artisan Laser Bed Comb Print…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears Supports needed for the bottom of the paint pallete only UPDATE 17/8/2022 - the wonderful Takman29 has helped fix an issue with the beret being thin…
Three piece Artisan Box/Case stand to display your Artisan/Keycap collection e.g. on a shelf. Perfect fit for the well known Evil Box. Not for your keyboard Do not put keyboards on that stand as they are more than likely to tilt over. Use…
Low profile laser bed clips for setting a repeatable work piece origin on the Snapmaker Artisan Laser bed. Available in different inset sizes so you can choose the perfect one for your job. The clips have two holes that can be used to…
This is a sci-fi inspired case I designed for my m920p to fit a two slut graphics card. And also a custom cooler I designed that’s integrates the 80mm Fan together with the case. there is also a bottom cover. that will introduce a little…
A 3x3 stand/case to show off your artisan keycaps on your desk. Angle is 15 degrees. Model is fairly parametric, as long as you want 3x3. Can change angle, height, size of squares, etc. in parameters Bumpons can be found here…
There is a gear set for HGX Lite (LGX) extruder on Aliexpress. I modeled several forms of a feeder for different radiators: E3D v6, E3D v6 with threaded throat, E3D v6 dragon fastening, CR-10, Mellow NF Smart and XCR. BASE model has…
prints flat and, easily assembled and creates a minature artist's easel. Designed to hold a iPhone in landscape or portrait modes. progression design from my contest model…
This is an remix of zbutt 1u No Hassle Container for 1 slot Other print can check it at: https://github.com/imyownyear/Z
this is a working for profile for JgMaker Artist D Pro printer. it may work with the non pro version I don't know. supports .16mm and .20mm layer height for right now only supports .4mm nozzle
(SF bolt checked: works with the SF bolt ) this model is designed for the MKII Stingray version of the FGC6 also a note this folding stock is compatible with the FGC6SF models credit note: most parts in this set are unaltered files from…
A 3D printable MX Switch Fidget Cube. It's simply a cube with a mounted MX Switch and consists of three parts: a bottom part, a top part and a switch plate. The plate is top mounted to the top part. The cube is held together with magnets…
A 3D printable Artisan Case for a single 1U Keycap or 6.25U Spacebar. It uses an optional Tenting Base and can be used with an Acrylic Cover for added protection. It also features a conservative keycap stem holder to keep your Artisan…
Fine details require SLA printer or 0.2mm FDM nozzle if you're good.
I liked Eduard3d's art brush holder, but needed room for many more brushes. This holder does that, plus simplifies the base. Print on its side as shown, with a support just under the base edge. Print with .2mm layer, 15% fill, and a…
A simple watercolor or gouache travel palette to be filled with 18 different colors.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Recommend printing using resin instead of FDM
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Solar panels have aluminum frames with sharp corners. This is ok if mounted far away on a roof, but not ideal if mounted on a balcony. So print four of these, clip onto the solar panel / module and it will save you from scratches. Also…
This was inspired by BrockLockers thing to help my wife with painting compositions. I found Brocklockers thing when printed not quite true in proportion to how I understand the Golden Ratio so I recreated my own in Fusion 360 (This may…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This lens cap requires the use of the lens hood that was included with the lens to attach itself. Recommended to print in TPU to give flexibility and protection for the lens.
Replacement knob when the original brakes.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Smoothed some curves and made the model printable with 0.6mm nozzle. A full list of changes is located below.
Happy Halloween from the 3D Printing Today Podcast!! This was captured using our Einscan-S. It was originally a resin sculpture purchased at a local grocery store. All the etched artwork is on the scanned object even though you cannot see…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A stackable artisan case to hold all your precious resin. Comes complete with a stand if you don't want to stack them! Edit 06/29/2020: Added a version that supports an acrylic lid(stackable_artisan_case_for_lid.stl), made from 1.5mm…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I have slightly increased the diameter of the heat insert holes to prevent plowing plastic when melting them in. I also added bracing to the mounting tabs so that there is no flex. Finally I added material to the lever and eliminated the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
This is a clone of the L2K concept by Artisan Alliance. I made this because I wasn't able to order their part through Shapeways and the designer didn't make the 3D file available for those with 3D printers. I whipped this design up in a…
Two types of Gopher keycaps: Standard Magician I printed them in resin and I would recommend resin print these keycaps if you can, so as to both capture the finest details and avoid support/tolerance issues
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a step up ring that adapts 39mm lens filter threads to 58mm. The TTArtisan AF 27mm f/2.8 uses the odd 39mm thread, and I wasn't willing to hunt down and buy another CPL filter, so I want ahead and designed my own. This is printed…
PLA 0.4 Nozzle 0.2 Layer Approx 1150 g Filament Thanks for downloading in advance and please don't forget to like this modell!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Trays and lid for holding Bernina Artista 170 sewing machine bobbins. While I'm sure the bobbins are used in other Bernina models I don't know which. Each tray holds 25 (5 x 5) bobbins. Trays stack together. The lid snaps into notches in…
My wife asked if I could make her a pencil case for her embroidery pencils. I said “Sure. How many pencils?” She replied, “160! And can you make it so I can see all of the colors?” Here’s what I came up with. I mounted it on an old spool…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
🎨 Paint Artist Gnome – Master of the Miniature Canvas 🖌 Meet the most creative gnome in the garden! Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top height on…
This is a holder for a board on the Artisan housing. Because I put the filament through the housing from above. The board must have dimensions of 380x655.
This design adds storage for the three Artisan modules and their accessories. It has been designed so it can be mounted on either the left or the right side of the enclosure. T Nuts are used to secure the shelving to the side of the…
This is a remix of fns720's KitchenAid splash guards for the artisan series mixers. I have resized the model to fit the larger 5QT pro series mixers as well as included the original size for artisan mixers. I would recommend printing in…
