Artis3D feeder Type KK (for Creality K1/K1MAX)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating.
- Rating
- 5 / 5
- Likes
- 226
- Downloads
- 904
- Makes
- 5
- Views
- 7,553
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating.
There are two versions:
KKb - using of stock metal bracket (still can face overheating). In this case one pin on the bracket should be grinded by 2mm (look at "mod" picture)
KKm - fully custom body.
Both models are designed for ECAS04 as well as for simple Fitting.
Also there are two variants:
- Without any additional bearings. It can be used when additional shafts in the bearings have no clearance. In this case some spacers are used (look at "spacer" picture).
- With additional bearings. It makes the mechanism tougher. It requires 2-4 MR84ZZ bearings (look at "bearings" picture).
Recommended filament: PETG, PA (fiber), ABS/PC, PBT
Recommended printing parameters: 0.4mm nozzle diameter, 0.1mm layer thickness, 40mm/s printing speed, printing without supports excluding some items (look at "supports" picture).