Artis3D feeder Type KK (for Creality K1/K1MAX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating.
- Ocena
- 5 / 5
- Polubienia
- 225
- Pobrania
- 904
- Wydruki
- 5
- Wyświetlenia
- 7546
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating.
There are two versions:
KKb - using of stock metal bracket (still can face overheating). In this case one pin on the bracket should be grinded by 2mm (look at "mod" picture)
KKm - fully custom body.
Both models are designed for ECAS04 as well as for simple Fitting.
Also there are two variants:
- Without any additional bearings. It can be used when additional shafts in the bearings have no clearance. In this case some spacers are used (look at "spacer" picture).
- With additional bearings. It makes the mechanism tougher. It requires 2-4 MR84ZZ bearings (look at "bearings" picture).
Recommended filament: PETG, PA (fiber), ABS/PC, PBT
Recommended printing parameters: 0.4mm nozzle diameter, 0.1mm layer thickness, 40mm/s printing speed, printing without supports excluding some items (look at "supports" picture).