Counting matching models…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
UPDATE 9/8/22: Better tolerances on all assembly pieces Back button made thicker to avoid transparency with lighter color filaments Main body without money clip version added This popular wallet model is now available to assemble after…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm
The source marked this model as adult content.
Inspiriert von vorhandenen Beerenwaschschalen – dieses Modell wurde vollständig neu konstruiert und besteht aus nur einem Teil. Zum Einsatz einfach ins Spülbecken stellen und Wasser einfüllen. Dabei entsteht ein Strudel, der die Beeren…
Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
Brauchst du eine schnelle Übrraschung zu Ostern? - Dann bist du hier richtig. Ich habe insgesamt zwei Varianten als Druckprofil erstellt: mit Knickohr mit geraden Ohren Montage: Evtl. musst du die Aluminiumfolie ringsherum etwas glatt…
Zusammenfassung Version 2.0 des faltbaren Taschenkamms! Er ist kleiner! Er ist leichter! --.... und ja, das war's dann auch schon... Meine Version 1.0 wurde von Grund auf neu entworfen, und dies ist eine Weiterentwicklung meiner Version…
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Der Verschluss wird einfach an die Flasche geklipst und ist vorbereitet mit universeller Passung auf deutsche/europäische Norm Glas Bierflaschen 0,5l (längliche und bauchige) sowie Norm-Glasflaschen 0,33l UND GLEICHZEITIG auf die 0,5l…
Progettato pensando alla risoluzione dei problemi, Phil ha diverse funzionalità specifiche per mettere alla prova la tua stampante. Queste caratteristiche includono: piccoli dettagli inseriti, piccoli dettagli in rilievo, sporgenze,…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Model for broom handles from 18 to 26 mm with new system to avoid gear leakage. If you like it, a like would be appreciated Thanks.
soporte para cascos Relleno 50%
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
Remix for the infamous Cascade card wallet that holds up to six cards. Print as aligned. Thanks to Hugo for making the original design! UPDATE 09/12: Added version with the money clip Happy printing! NK
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
Hier könnt ihr euch Print in Place Deckel für eure Bierflaschen drucken. Gedruckt werden können sie aus PLA Material mit min. 2 Wandlinien, 0,2mm Layerhöhe und 15% infill. Es gibt nach Rückfragen nun auch eine Schweizer Variante welche…
This is a Remix of the tree stump model by Robagon here: https://www.printables.com/prints/12116-stump-for-gloomhaven and the Pinecone by jjp12383 here: https://www.thingiverse.com/thing:3076993 These are fun little upgraded tokens for…
Habe einige Modelle gesehen die ähnlich sind aber nicht ganz nach meinen Vorstellungen waren z.B. wollte ich gern die Form eines Kronkorkens mit eingebaut haben so habe ich dieses Modell Entwickelt und mit freunden getestet ! Zusätzlich…
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
The Gömböc is a fascinating mathematical object with a unique geometric property: it has only one stable equilibrium point and one unstable equilibrium point. This means that when placed on a flat surface, it will always return to its…
Ein kleiner Helfer, um widerspenstige PET-Flaschen leicht öffnen zu können. Kompatibel zum verbreiteten PCO 28 Standard (Wasser, Cola, Limonade, Säfte). Die Verschlussaufnahme verläuft leicht konisch, so dass auch leicht abweichende…
Halterung für den Schutzdeckel der Gasflasche. Im WoMo fliegt der meist in irgendeine Ecke und man findet ihn nicht wieder. Der Halter kann im Gaskasten angeschraubt oder einfach nur geklebt werden. Der Schutzdeckel ist sicher verwahrt.…
An assemble after printing version of the print-in-place Cascade Wallet v2, to allow for multi color or multi material components. Like the original, the shell is printed upright The handle can be printed on end or on edge with supports…
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it…
Easy print for marking the stitches while knitting. The one who requested it finds it very useful :-) printed in PLA If you are interested in knitting, please have a look at my needle gauge 3D model. have fun see also blog post: Knitting…
Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…
I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…
My aunt asked me to make some knitting stitch markers in different colours. I designed this, which works well with PLA and ABS (thats what I tested so far). They print in around 1 min each, when printed in larger quantities and with an…
Just place a beer bottle cap in the middle where you can put out the cigarette. In der Mitte einfach einen Kronkorken platzieren um die Zigarette auszudrücken.
** The SNRT BOX ** This is a box with an integrated straw designed for storing powdery substances and crystals. - Keeps your materials secure and ready for use on the go. - Allows for 3 lines on the go. - Features an extra large and deep…
Maschera decorativa ispirata agli Oni giapponesi, progettata per stampa 3D e perfetta come elemento da parete, esposizione o decorazione fantasy. Il modello presenta linee aggressive, zanne pronunciate, dettagli scolpiti e una forma…
This is a remix of the "Cascadia Organizer" board game insert by Aaron. - Thinned the walls on the bag tray and added a logo deboss - added a snap-fit box for the pinecones with a logo deboss (or optionally a different coloured inlay…
This is a remix of the José Campos project, Mechanical calculator (modular design). I made some cosmetic changes, and I completely replaced some gears, added springs, to improve the functioning. Pay attention to the alignment of the…
PLA / 0.3- or 0.4-mm layer height / 2 perimeters /15% Gyroid In-fill /No Supports Recommend staggering seams to increase strength Note: On 11/20/25 added a slotted version of the “Pull” that can be pressed into place. This makes…
A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.
Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Diese Absaugung kann in Verbindung mit einer Tisch- oder Ständerbohrmaschine verwendet werden. Je nach Toleranzen des Druckes muss man die Verbindungsstücke ggf. etwas anpassen. Material: PETG This extraction unit can be used in…
UPDATE 8/10/2025: strengthened wings This is a reverse-engineered remix of popular “Cascade card wallet V2” by @Hugo. My version is slimmer (7.7 mm vs 11.5 mm), but fits only 3 cards. It also incorporates spring placement from…
Hoy os dejo una reparación de unos cascos bluetooth JBL TUNE 510BT de mi hija. Para arreglarlos hay que desoldar algunos cables como comento en el video.
Who needs Ridge! 😉 This is a remix/remake of the Cascade Card Wallet with an insert for an Airtag. The body has been fully recreated with the expanding slots (used to hold the cards in place) moved to the sides. There is an additional…
English I have remixed the wonderful beer bottle helmet model and replaced the helmet with an NVA M56 helmet from the GDR. Print settings You can use the print profile (3mf) with pre-configured settings and colored hand for ams usage. Arm…
Schlüssel für den Druckminderer bei Gasflaschen. Verbleibt an der Gasflasche und kann so nicht verloren gehen. Ein nettes Mitbringsel für alle Gasgriller. Infill min. 30% und ohne Support drucken! Key for the pressure reducer for gas…
Wie der Name schon sagt habe ich einen Aschenbecher designt. Da ich nie einen für meine Gäste zu verfügung habe und jedes mal einen aus Alufolie basteln muss :D Now in English As the name suggests, I designed an ashtray. Since I never…
Fully printable without supports! I chose to use a brim for my prints, but it is not strictly necessary. Mine used 10% infill in a Gyroid pattern in PLA+ at 0.1mm layer height, scaled so it is 100mm tall (around 4 inches) and 2 walls /…
Schlüsselanhänger "Nähmaschine" von DIY Eule für Näh-Nerds
Take your aquascape to the next level with our unique aquarium planter. The planter features four tiered levels, each increasing in height toward the back of the tank. This design enhances the feeling of depth and allows for a beautiful,…
Dos modelos, uno de una adorable figurilla de un tigre, la otra dispone de una anilla para utilizarlo como llavero. Excelente para regalar. Muy adorable.
Überrasche deine Liebsten mit einer kleinen Aufmerksamkeit. Der Druck ist nicht nur für Kinder, sondern auch für Erwachsene geeignet. Wähle aus einer der sechs Varianten oder drucke gleich alle gemeinsam. Nicht vergessen: einzigartiges…
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
Update 15.06.2021: Made some small changes to fit better (easier opening) Just a simple cap for your beer bottle. Perfect for partys to mark your own bottle and to prevent the beer from dust or insects. Printed in TPU with 100% infill and…
Das Loch ist dafür da , das man das z,B. an den Schlüsselbund hängen kann. Er liegt prima in der Hand, daher auch mal was größer als die meisten. Perfekt für eine Party wo JEDER und JEDE einen eigenen Flaschenöffner aus dem 3D drucker…
Printing : I recommend printing in PETG (PLA tends to lose the tension with the cards over time) Nozzle : 0.4mm layer height : 0.2mm no support Print the model upright
soporte para casco, recomendable imprimir tumbado
The stock power switch location for the Losi NASCAR is on the ESC/Receiver, which is very difficult to reach with the body on. The switch also tends to come loose, because it isn't held securely in place. This 3D-printed bracket lets you…
A sliding ashtray for cigar smokers inspired by an existing design with a beautiful cubatabacco logo on the front. The ashtray allows you to let the cigar rest and also catch the ash while it rests. Its not designed as a pocket ashtray,…
The cascade card wallet is great and It's the one I use but overtime cards always start to fall. I added two 0.5mm tiles on the inner side that add extra friction for the card to not slip away and fall. It works good. You need to…
🇸🇾 مرحبا بكم في سوريا Welcome to Syria This model is very special for several reasons, and we are proud to share it with you: After the earthquakes in Turkey & Syria in April 2023, we created and published this model for sale on some…
I like the Ellrico spray holder (thanks). But I didn't want to screw it to the wall, I wanted to hang it on the skadis wall from Ikea. So I added two hooks and made the base plate a little bit thicker. Printed on the Ender 3 S1 Pro with…
I noticed after printing the original v2 model in PLA that the cards in the first few slots would not easily extend from the wallet, while the back cards came out too easily. To correct this, I changed the orientation of one corner so…
Inspired by my original Aquarium Planter , this small version should fit into most 5 gallon tanks. It has one less tier, but attempts to keep the same feel and space for plants as the large version. It features 3 tiers designed to enhance…
Waschbär, Hexa Sculpture
Loved the functionality of this wallet, just wanted to add a little more flair to it so added tree and mountain designs
Damascus Steel version of the Butterfly from Counter-Strike. The separator and the pin should stay in place by friction. The original Blade is quite hard to print, so I made a version with a duller blade angle to reduce the overhang. The…
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
Labubù in high details Supports must be enabled Dimensions: 36 x 33 x 65 (mm) I used around 13 grams of filament in total
can be printed together or separately in other colours can be printed without support the Dodge Charger is very realistic Print in place kit card , Assembly required
Ninomae Ina'nis' mascot from Hololive. The halo is excluded from the design for the purpose of 3D printing; also, the model is missing a leg when it should have eight, like an octopus. I plan to edit the model in the future to fix the leg…
I wanted my Tux printed in colors. So I created 3mf file for MMU. I used PLA but you are free to change everythin you need. You need only three colors. Enjoy!
MINIATURE MASCOTS OF THE 2026 WORLD CUP
Bei Nozzle 0,4 Wandstärke auf 3 erhöhen.
NOTE: I take no responsibility for this falling off your house. It's on my own house, and I feel like I've bulked this thing as much as I can to compete with the metal one from Starlink themselves. PETG is freakishly resilient and strong;…
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
A simple model of Vasco the companion robot. Comes equipped with a backpack to carry your sandwiches.
Four Part stand for the Native Instruments - Maschine MK3 This model does require some assembly and uses “Heatsets" as the threaded inserts holding the parts together. It's designed to be quite robust and has a 23deg angle for the…
Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
Das ist ein Halter für die More Zerup Sirup Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind aufgeräumt. Es passen 8 Flaschen in den Halter. Einer Version der Halter habe ich noch mit Stützen versehen,…
Organizer inserts for Cascadia base game + Landmarks expansion. Landmarks expansion is not pictured above, but the organizer does fit everything from the expansion. STL and STEP files included. Wall thicknesses are all .064 inches, or…
Höhenausgleich für das Nähen dicken Stoffes damit der Nähfuß nicht so stark kippt und leichter auf den Stoff fährt. Die beiden Teilen klippen zusammen. Height compensation for sewing thick fabric so that the presser foot does not tilt so…
Pet shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mascotas para arcilla polimerica, galletas o manualidades You can scale it according to your need Puedes escalarlo según tu necesidad
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
3 von diesen Füßen werden für eine Gasflasche mindestens benötigt. Ich habe sie aus TPU gedruckt. Leider scheinen die Gasflaschen alle leicht unterschiedlich zu sein, deswegen habe ich mir mehrere Sätze ausgedruckt und dabei im Slicer mal…
Prusa MK4, Prusa Slicer X-Achse 30° gedreht, Düse 0,4 mm, Layer 0,15 mm, Raft 3 Layer, Support Stützen nur auf dem Druckbett
Bring home the legendary “Dropout Bear” – Kanye West’s iconic mascot from his classic album covers! This high-quality 3D model captures all the unique details of the famous bear, perfect for Kanye West fans, collectors, and digital artists.
Dies sind Halter für die More Zerup Sirup Flaschen. Für 2, 3, 4 oder 5 Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind Aufgeräumt. Diese können ohne zu Schrauben in die innen Seite einer Schranktür, oder…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…
The lid has two latches on the top to keep the lid from bending outward. The cards keep the lid closed. I have been using it daily sinds July 2023. I tend to not leave my home with coins in the compartment because it rattles a lot, but it…
Placas identificadoras para mascotas: perros y/o gatos!
Zusammenfassung Ein Deckel für Bierflaschen
I designed a box insert for Cascadia with Landmarks. The first part holds all the starting tiles, the Landmarks scoring cards, the base Wildlife scoring cards, and both scoring sheets. Printed in PLA, no supports. The second part holds…
![PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]](https://media.printables.com/media/prints/23297/images/237355_72dadc53-8e36-4086-b7eb-9482eba771ac/step27.png)
