5,469 models
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…
I just gave it a flat bottom so it sits flush on the build plate. All credit goes to the original creators. My cat was not willing to model it for me
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
Click here to check out the new version of this body kit for the MK3 and MK4! Description: After hours and hours of watching the printer printing, you've got bored with the Design of your Prusa? Give it a new look with the Ultimate Prusa…
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…
Articulated Snake v1 by Onasiis This is not my design, designer is Salvador Manceraonasiis • Spain I just wanted to share it with you.
These screw holders hold a screw in front of a drill, and automatically release it once the screw head starts to enter the material. I recommend printing these from PETG or a stiff TPU e.g solid 68D Inspired and improved version of this…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
I wanted a skull that kept the sharp robotic angles of the original head, so here it is. A basic spooky skull for the Dummy 13. I include two versions, one with the original jawline and one with a slimmer jaw.
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
After realizing how much easier it was to print the 13 family of prints with runners, I decided to make a runner for the Lucky 13 since I had struggled to get that print to stick (which resulted in some interestingly misshapen ball joints…
Very simple and easily adjustable model of the Yggdrasil - a tree that grows through all nine worlds. Use a piece of double-sided tape to stick it onto a wall or other flat surface. The 3mf file included is for printing on the MK3S…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
I loved a similar wooden construction toy when I was a child. However, as more and more components break and my children show a lot of interest in building and constructing, I have started my own printable system. The files in this set…
These models of high-detail metric screws with a 3mm diameter are available in various lengths of 10, 12, 18, and 20mm. These screws are very common and are also used to assemble Original Prusa Printers! Warning: Do NOT use these screws…
Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…
3D Basic geometric shapes Shapes: - Cylinder - Prism_triangle - Prism_right_triangle - Prism_Pentagon - Prism_hexagon - Prism_star_5 - Prism_star_6 - Cube - Cube_hollow - Cube_rounded - Cube_rounded_hollow - Sphere - Semi-Sphere -…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
🌸 Le printemps arrive ! 🌸 C'est l'occasion idéale pour appuyer nos apiculteurs locaux 🐝. Nous avons lancé une initiative pour imprimer des pièges à frelons asiatiques. Cette pièce est un piège imprimé en 3D pour les frelons asiatiques,…
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
Remixed for easier printing. No supports needed. Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers. Looks especially snazzy in coextruded silk PLA.
Cut off some parts for easier printing White - Jessie White PLA Gray - Galaxy Silver PLA Black - Jessie Black PLA Category: Sculptures
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…
The 10mm diameter, 3mm height magnets to hold the two halves of the UFO together are optional, as a display piece gravity alone should be sufficient. Use a piece of wire to hold the UFO over the base at a height and an angle you like.…
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
r = 35 mm h = 100 mm
I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
There are many Nissan emblem designs from the CAD community but this one is mines LOL! *NOTE : When printing this design, you WILL NEED SUPPORTS for the “Nissan Emblem - Body”. For both the FDM, FFF, and SLA printers you will need…
Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…
Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °
Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.
I always print the Dummy in 250% now that I did it once and loved it. It's basically Barbie sized and allows for so much more detail in both the Dummy and the accessories. I have been asked a number of times now about sizing of the Dummy…
This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…
GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
Since I started working on a dice generator, I would like to share one of my first creations from it. In the current state, it's still quite experimental, but the final dice generator aims to allow you to exchange every single side with…
Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…
NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Scimitar Shortsword Longsword Sabre Katana
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
Basic Collection This is a basic collection of a larger system available to be purchased here . I understand this system has been available for free for years. I greatly appreciate everyone's interest in this system and LOVE seeing…
Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…
This is an insert for Tapestry, including all three of its expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys). Here are some of its features: Gives each landmark mini its own custom-shaped storage location. Supports…
Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…
This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…
I like this robot competition, I created another model, I really like the shapes and lines of the Honda Asimo robot , so I tried to model one as best I could. I used 4 different types of movable joints in the model - vertical, horizontal,…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
This collection of miniature figures, mostly around 32 mm scale (though Barthal may be a bit big for his kind), represents the standard pregenerated characters included in the BF1 Morgansfort multimodule for the Basic Fantasy RPG. It…
Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…
Original Text by @DAKUE1999 I've always wanted to make a gift box that's a bit annoying for the recipient. I saw an advertisement on YouTube for a similar box for €20 and thought I could make it cheaper. The box is 10x10x10 cm in size.…
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…
Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…
ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…
This is a small sample of some of the simple shapes. This could be used for teaching children basic shapes. These models can also be manipulated to build other models. These are just made from the Tinkered basic shapes tool to save you…
This is a simple yet very useful planter pot saucer I designed for use with round planter pots. Initially designed to be less noticeable and prettier than the deep plastic saucers that I can find at the garden store. I have seen other pot…
I needed 3mm flat inserts for a pair of boots to fill space under other third-party insoles. I made these and sized them to match the original inserts. Paired with the new insoles, the boots are a great fit. Now that I've started this, I…
Updated October 1 2023: Made a deep basin that will fit all of the sieves so you have a proper size container to sift into without making a mess. Added because as I've used the sieve with Walnut shell, tumbler shot, porcelain beads, etc…
A 3D printable watch stand for Casio G-Shock watches and the like. It's easy to print and holds the watch securely. Features The watch stand takes inspiration from the existing model made by Alby312 . Starting from scratch I made mine…
I used no supports. I split the model into two parts and then glued them together.
Fits standard Rocker light switches and Rectangle outlets Basic design with no embellishments for a single gang outlet Print your outlet's cover in your favorite material Don't pay 'big' light switch, another $0.75 ever again. Probably…
A basic wind turbine design that can produce enough electricity to power a small LED light. I manged to print all of the parts on a stock Ender 3 using PLA, so it should print fine on any printer out there. How to print: Material: PLA,…
It be a bracelet A bracelet it be Turn your ears Listen carefully, This small bracelet Won't fit you If not made out of tpu! If you don't have tpu filament, the first version of this bracelet is not for you. Something very stretchy must…
A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
I enjoyed the Articulated Spider by @soozafone but struggled with bed adhesion on the frame, joints, etc. This runner includes the fiddly-bits but you will still need the following from the original files: Carapace Eyes Abdomen
UPGRADED EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use! Upgraded with stronger tip!
What I changed: BASE: Added a hole for a 37mm candle. That should save some filament and allow you to turn on/off the candle without having to take it out of the print. This is a very minor change, so if you are not sure what is your…
Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
Home travel and fitness exercises and fitness dumbbells are very easy to use and can increase enthusiasm for fitness. It can meet your different training needs. Suitable for women or children to lose weight or exercise. Adjustable weight,…
Edit 3/1/26: I don't know what I was thinking not making lids for this. Lids for all boxes uploaded now. This is a simple insert for Wingspan Asia. We wanted a portable 2 player version that's easier for travel, so housing this in the…
![BUILDfinity construction play for kids // Konstruktions-Spiel für Kinder [BASIC-SET]](https://media.printables.com/media/prints/689810/images/5419730_f64e8cc2-1d55-47b6-9e6b-2c5134cba6e2_07046611-77fd-476f-8e21-a513fe78a163/buildfinity_2.jpg)
