Counting matching models…
I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…
I just gave it a flat bottom so it sits flush on the build plate. All credit goes to the original creators. My cat was not willing to model it for me
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
After realizing how much easier it was to print the 13 family of prints with runners, I decided to make a runner for the Lucky 13 since I had struggled to get that print to stick (which resulted in some interestingly misshapen ball joints…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
Remixed for easier printing. No supports needed. Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers. Looks especially snazzy in coextruded silk PLA.
Cut off some parts for easier printing White - Jessie White PLA Gray - Galaxy Silver PLA Black - Jessie Black PLA Category: Sculptures
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…
NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…
Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…
Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…
Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…
Original Text by @DAKUE1999 I've always wanted to make a gift box that's a bit annoying for the recipient. I saw an advertisement on YouTube for a similar box for €20 and thought I could make it cheaper. The box is 10x10x10 cm in size.…
READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…
I enjoyed the Articulated Spider by @soozafone but struggled with bed adhesion on the frame, joints, etc. This runner includes the fiddly-bits but you will still need the following from the original files: Carapace Eyes Abdomen
UPGRADED EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use! Upgraded with stronger tip!
What I changed: BASE: Added a hole for a 37mm candle. That should save some filament and allow you to turn on/off the candle without having to take it out of the print. This is a very minor change, so if you are not sure what is your…
Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
The voice teachers asked if I would print them model larynx's to show their students and the existing models either didn't come apart or were too fragile to print so I made some edits and the teachers love them. I struggled to get the…
Edit: Added v4 lid which now has nubs for easier turning, as a few have suggested. I didn't see any remixes yet so I added this one myself :) I noticed that the original model had a tendency to come undone and you can't really see what's…
If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…
Différents casiers pour meubler une L-Boxx Bosch taille 102mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
This is a moss dome to hold down and protect any plants you may have in your aquarium.
Baldur's Gate 3 Artefact by uprisingfx - just split into 2 halves so I could print it better on my FDM printer, then I glued the 2 halves together. I had some very small supports for a couple of the ridges where I had split it. It's not…
I recommend use 6 bottom layers and 6 top layers to increase the strength of the part.
As I had some problems with removing (and inserting without a hammer) different types of inserts, I made my own version. This version has to be inserted in the correct way as it has a top (the thick side, see arrows on the back of the…
I wanted to print 4 of the Key variations but in a large quantity and fast with minimal post processing. I simply imported the models into the slicer, split them into their separate objects, scales accordingly so they merged well then…
Marble Run 2 rescaled to 102%, with extra wall to avoid balls jump out and easier winder. For 8mm metal balls
This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…
Clamps for the Neptune4/PRO cable chain with the innermost beaks removed
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
-Remixed and easier to print wings for V1 Ultrakill (Also Dummy 13 Remix) -Tolerances (X-Y compensation) must be around NEGATIVE -0.002/-0.005 for it to fit and not snap-break. Also you could use this compensation for the general build of…
Props to Ada Cohen for an awesome model found here: Dual Portal Desk Toy by Ada Cohen | Download free STL model | Printables.com And the printed bearing Ada made for people who don't have 608ZZ bearings:…
Intro I already had some Silk Gold PLA and was able to fine tune it for ring shapes. So I tried using slicer based “painting” to change Jéjé's model to print a light yellow color for the letters and the gold for the outer area. It sort of…
Side mount for improved and easier loading on the Qidi X-Max 3. Compatible with the dry box. The box is rotated 45 degrees but the stays desiccant bag stays in place just fine. The bracket fits snug into the side handle. I printed this…
remix of https://www.thingiverse.com/thing:11978 Just rounded some corners to minimize corner bulge and ringing so that I could print faster and still have a nice free chain movement. Print instructions Category: 3D Printer Parts
Over on Thingiverse, 3DJake uploaded a design of an enormous Lego Head Planter (https://www.thingiverse.com/thing:4907535). I tried to print it several times with no luck because I couldn't get the overhangs right. Even with support…
I just added some cut-outs to the dividers, based on a real beer crate design. This makes it easier to slide the batteries in. Thanks to CAD-Guy for the great design!
A slim tray to store the discarded tiles. Refilling the bag has never been easier! I wasn't a fan of the original tab used to pick up the tray, so I redesigned it from scratch and added a finger hole to make removing it from the box…
The original model has a very small contact patch on the hinges and requires stronger bed adhesion than I could consistently achieve. This is a few minor changes to support the print in place hinges during printing. The small contact area…
Rasierer Halterung fürs Badezimmer, am besten mit Doppelseiteigem Klebeband festmachen.
My remix of a brilliant model by Koobj which made it easier to print for me.
This v3 of the AD5M door hinge for DIY enclosure is expressly for the Minimal enclosure and its remixes. It repositions the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as keeping…
Split for easier printing, muscle2a has meshmizer supports added. Category: Models
Same as the Voron Panel Locks, Larger separation (easier print in place) but for 6mm total thickness. Used for 3mm Acrylic + 3mm Foam. Corner Panel pieces may not fit on the front edges depending on your hinge location, use the straight…
Made some modification: tighten tolerances around hex nuts reduces bulk of back (to avoid back pressing on dog) made it easier to print (see image for recommended print orientation) tighter fit to my pup's Julius K9 harness. matched the…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
If like me you are using the 8mn away from the wall version of the Multiboard, you might be worried to break a panel while adding a new snap. It happened to me twice already :( Therefore here is a slighly easier fit snap with which I had…
Slightly modded version to make it more easy to print
Changed fillets to chamfers for easier overhang printing.
Infill - 100% layer height: 0.1 Dont know what is a gomboc? search it up. Thanks @MarcelBencek_3205250 for suggesting changes to the original model which i have improved by remixing. Also the scale of original was less than 1mm so i had…
Added a little handle for easier loading
This is a remix that combines the features of the two remixes it's based on: Makes the head rotatable by hand Adds some structure so parts of the base don't detach so easily from the build plate I just merged things in Blender, credits go…
The original two-part needle assembly is quite hard. This is more easier to print.
Slightly modified version of original, as that one would detach on my glass-bed equipped printer every time. Added a scaled cube with Blender that extends the bottom layers from 3 thin lines to one rectangular area.
Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…
Modular stackable robot vacuum ramp to override 25mm difference in floor height. Works as is, but could be improved-reinforced so stepping on it would not break it. Stackable to save space when not in use. First thing I ever printed.…
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…
Created with Orca Slicer 1.6.6 Layer height 0.28 Gyroid infill 8% Small amount of tree support for true overhangs. Added them after the first plat printed but had a lot of stringing.
A basic D20 dice. Nothing super special. I did reference the proper design of a D20 dice, so the numbers are not randomly assigned. I did a re-design to remove the ridges and inset the numbers, I find this prints nicer on FDM machines…
I was having a real hard time assembling the container so I increased the tolerances for the walls and also added reinforcement colluns to the walls because it was getting all scrunched up when I tightened the lid. I also fixed a weird…
I added a Merry Christmas! to the frame, and added a .8mm fill on the spiral tree bits to make it easier to print. The whole model is also scaled to 175%
The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…
EN Updated 27/03/2025: Modification of ‘CPF-BASIC’, ‘CPF-CG’, and ‘CPF-CD’ to add a foot for horizontal use. Addition of ‘CPF-Pied Storage box for 72 markers, pens, pencils, etc. Square slot, 1.5 cm square, with 6 rows of 12 slots. Parts…
loud mini 3 piece horn. easy 1.5 hour print. 32 grams.
Remix of @Quarren42's model with the whole model reaching the build plate, prints easily with a brim. 3mf should be multi colored, made in Bambu Studio for the AMS. Mount with a command strip.
Complete remix, no visible screws, easier to assemble, better temperature sensor placement, 2 LCD types and 2.7 E-Paper.
How I do it in Bambu Studio! Keytag Blank: Font: Agency FB Size: 6.00 + Bolt Thickness: 0.40 --------------------------- Set key tag to center. Add text. Move text in Z to 0.6. Printer BBX1C Material PLA 3mf File included
Print it with supports on bed only. PETG worked best for me. You could use the 3MF file and adapt your own settings if needed. If you like it, give me a like and post your make! Enjoy and happy printing! :-)
I was having blobbing and other issues while printing. I removed the logos and added printing discs to increase bed adhesion. Print instructions Print at 0.28mm layer height, 3 walls, 25% infill.
When downloading and importing the files from the original model, I had a hard time arranging the models bcs Prusaslicer dropped them all down to the build plate and I have no way to disable this. So I loaded the files into 3D builder…
- easy print / einfacher Druck / jednoduchý tisk - no supports / keine Stützen / bez podpěr Just stick with double-sided tape / Einfach mit doppelseitigem Klebeband festkleben / stačí přilepit oboustrannou páskou
This is an XT60 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…
A simple remix to make the model easier to print. I removed the overhangs so it can print flat on the bed without support. I printed in PETG and it fits like a glove. Thanks Noctua !
Eine Rasierhilfe/schablone mit Kamm um Bart Konturen schöner hinzubekommen.
I guess I don't value extremely rounded vertices as much as everyone else. I flattened the top of this accessory holder so I could print it w/o the first few layers having extreme overhang that resulted in a messy print or lots of supports.
V2 design: -Changed the lid design to add it some weight. -The base design MUST NOW BE INSERTED FROM THE TOP OF THE BOX. -The wall mounter has built-in supports that prevent it from falling off mid-print. theese 0.4 thick walls must be…
Ich benötigte eine Wandhaltung für meine Braun Reinigungsstation. Da ich die Kartusche nicht dauerhaft in der Reinigungsstation eingebaut habe, sollte diese außerdem über ein extra Fach dafür verfügen. Wer dies nicht mag, kann hier…
Not actually a remix but that was the only option for uploading that was close.
slimer, better fit and easier to remove Improvment to my earlier design: https://www.printables.com/de/model/783667-usb-c-dust-cover-for-android-smartphones-with-ultr There are some usb-c dust protectors on printables but they were too…
This is an XT30 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…
The model was modified to allow the stock cover to be opened. For this, the rear brackets were equipped with heat-inserts to secure the hinges. For the lid, I used the "Prusa Core One Magnetic Top Cover with Integrated Vent Handle"…
The original model would require a lot of support, which would lead to worse surface quality. Using Prusa Slicer 2.6.0 (alpha 5), I split the base of the Neutral Dude from his body, and made them connectable via plugs. This way the only…
Low poly flexi snake
Zahnbürsten-Halter um diese in die Dusche zu hängen. Habe es mit Tesa Power-Strips auf die Fliesen geklebt.
Thanks to @ArtDesign for realizing it's absolutely essential to protect the Snapmaker U1 electronics compartment (PCB) from the heat of the printer chamber, especially if you plan to enclose your Snapmaker U1 with a TopHat or Lid and…
This is a remix of 87squirrels MasterSpool Remix. https://www.thingiverse.com/thing:2794052 I just made the wall a little more thick to increase stiffness and reduced the diameter to 100mm to make it easier to use. meanwhile I have…
I've having a hard time breaking free the removable command strip mounts from @Marcus_543412 (Can't break free at all even after completely destroying it). But I really need this design as it become impossible to remove the command strip…
Just slice and print. No supports needed as the ears are less horizontal than in the original model. For best results - use variable layer height and use smaller layers around the ears.
Useful and original bookmark, designed to help you organize your books and easily take them out to continue reading.
This is a 3D printed handle for the 3DMakerpro Moose 3D Scanner. *For this print you will additionally need: 1x O-Ring 10mm Outer Diameter 4mm Inner Diameter 3mm Height 3x Ruber feet 10mm Diameter 2mm Height When using the Moose scanner…
Theese inserts are easier to insert and remove! Push a little on the tabs to insert.
