Counting matching models…
An export from the game, done up for 3D printing. You will also need to print him a base. I like these: https://www.printables.com/model/862331-slate-floor-miniature-bases But it is ultimately up to you where you want our boy to be…
PLease Share YOur Makes WE Love you Enjoy <3 YOU can print this in FDM at a higher scale This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—No Derivatives ✖ | Sharing without ATTRIBUTION ✖…
A friend of mine had used all kind of air vent supports and finally the air vent blocks of his renault trafic were completely broken. I found on internet many version of the little horizontal blades but not the long vertical ones. Thanks…
Mark XLVI Bastard Inspired Helmet This and the Oldboy Armor were cut from The Iron man 3 Movie {Edit} --- It was brought to my attention that the model had errors, So I took that time to fix and while I was at it separate the back. No…
A star Fidget that might break, so be gentle. Might take 1-6 hours
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…
The starfish has a central hexagonal body with five tapering arms. Each arm is divided into three hinged segments, allowing it to wiggle and move flexibly rather than being a rigid statue.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Fat Bastard from Austin Powers. Act Now. Limited Time Only. Added “Shark With Frik'n Lasers”. (See Additional Picture)
The figure is designed as a "flexi" toy, featuring articulated joints at the shoulders and waist, allowing the limbs and torso to wiggle or move freely. Color Palette: It is printed using multiple colors: Cream: For Patrick's main body.…
it's based on the first volumes ! it's split to be easy to print. BUT the beetle is very hard to print beacause it's small (at least with FDM printer) so i hadvise to scale the model on the printable seize of the beetle i made the joints…
You find a real card‘s back and stick it on the back of the fake card
Camera is generic square 24x24mm chinese reverse cam from aliexpress, amazon or so, you only need to remove original bracket to fit it. Housing just clips onto the glass corner, no glue required, holds perfectly.
This is the Cursed Bastet — a dark, eldritch reimagining of the Egyptian cat goddess, twisted by serpentine forms and unsettling anatomy. Features Multi-serpent eldritch design Horror / dark mythology aesthetic Built-in base Designed for…
Sony NP-F970Pro / Kastar Battery Cover Storage Box / 4 Count
We wanted to decoratively wall mount our RB19 Model, so I designed the parts for it. Consists of a wall-part to screw onto a wall and a car part that screws onto the car. The car can then be hung from the wall-part using a…
Nyckel till Gustavsberg vattenutkastare Sweden ver2.0
Wall Art - Seastar I included 3 versions with 3 different thicknesses(5mm,7mm and 10mm)
Hello! I designed this for myself, but I thought to upload it just in case someone else was building a BastardKB keeb and ran into the troubles I had. The plate is designed to snap into the heat insert holes for the PCB shield, just like…
This is a hexasphericon using a star as the base-shape. I also included the OpenSCAD source so that you can modify the shape yourself. You can replace the svg with a shape rendered directly in OpenSCAD (e.g. circle(d=100, $fn=6)). Note…
Description This belt holder is specifically designed for the IKEA LASTARE series. It attaches directly to the existing holes inside the cabinet and does not require any modification or drilling. Mounting The holder is mounted using 2…
A token resembling the "B" from Beastars
There are plenty of displays out there, but almost all of them are designed to showcase objects that have a relatively flat bottom, such as a phone or a tablet and hence will stay put even when it gets slightly perturbed. However, these…
A starfish sculpt. 3 Versions, a natural one, a low poly one, and a wireframe one. The former two should print without supports, the latter requires organic tree supports @ 5 degrees to feel solid (I suspect it can print with none).…
Small Seastar for sensory play. Scaled to avoid choking.
I bought many of these led bulbs, I must say that they work well, the remote control is also provided for each bulb. For the last installation I needed to make the remote control portable quite easily, so I made this case that doubles as…
Made for ALDI Sodastar glas bottles 850ml.
On the beach or in the backyard always be ready to whack your brother with style. This is a pool noodle bastard sword hilt and a part of the collection I am calling warrior gear . It is a set of interchangeable handles, pommels and cross…
Update: tried in keyboard and did not work since it was too far away from the trackball. New version (v5) should address this issue. but you need to print a remixed version of the adapter_v4_bottom as well! It is still not perfect, but I…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A sleek and charismatic figure inspired by Astarion from…
Super durable Christmas RGB star, great for topping mega trees. You can check it out in action -> https://www.youtube.com/@pleasantonpixels
Chránič na lyži drží po nasunutí celkem pevně, ale pro jistotu ho lehce přilepím. Vrtat se mi do lyže nechce. Doufám, že vydrží Tištěno v PETG. Pokud se vám model líbí, budu rád za váš like. The ski protector is quite firm after being put…
52mm gauge and lock switch mount to replace stock switch panel. The original lock switch clicks into place as per the original panel and the the whole gauge mount also clips into place in the original dash piece. The included gauge back…
es para convertir la llave original como la de la fotografia a plegable utilizando la placa original. se necesita una llave plegable como la de la fotografia (muy baratas en aliexpress) para utilizar su espadin junto con el mecanismo de…
This is a Holder for the Vastar battery powered rotary tool and it's addons. Easy to print and does a great job.
Wanted a small desktop case for a full size ATX motherboard, so i made one. Will fit mATX & ATX motherboards and have no problems with 900w psu. There is a space limit for GPU, 3fan cards will not fit. (I think 270mm is max lenth) Made…
I bought a wrench from Aquastar, model VSJW102 . It didn't quite fit my return Jets. This has wider gaps that are wide enough for the tabs on my return jet eyeball retention ring.
This replica of the famous location of Sedletz monastery in Kingdom Come Deliverance 2 is for your bathroom to hold all sorts of things, toothpaste, toothbrush, nail clippers, and especially, your Phillips one-blade razor! It has three…
Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels
Ninjastar 6p Cookie cutter Simple, 100mm diam. Thanks for your support! We need your support as fresh air.
Juego para gatos reutiliza spools de filamentos de plastar - printalot
Spare wheel holder for 1/14 Rastar Land Rover Defender. You can mount 1.0" wheels with a 7mm hex. You need a M2 threaded insert and a countersunk M2x8mm screw. Also another screw to mount the wheel. Be careful with disassembling the stock…
Hook for hanging Rastar Porsche 911 GT2 RS Clubsport RC model in 1:18 scale (Designed for the self-assembly 1:18 scale version) This hook is intended for hanging the model by its front axle only . It creates a nice display angle from the…
Accessories for Dave_C's Bando Bastard frame Including: ELRS rear antenna mount - Fits the Happymodel EP1 antenna SMA antenna mount Vista antenna mount GPS mount - Fits BN-220 Front and rear bumpers Arm guards
Introducing the NebulaB Aerospace 3D-printed space rocket! With the ability to reach heights of 1km and speeds of 500kmh, this rocket is a marvel of modern engineering. Measuring just 21cm in height, it's perfect for collectors, students,…
This Rackmount can be mounted on the side table of your "The Bastard" VX kamado. You can hang BBQ tools ( Tongs, Burgerflipper, Pook, etc.) on it. Filament: Prusament PETG “Jet Black” Nozzle Diameter: 0.4 mm Layer Height: 0.2 mm Filling:…
Remix Since I hate glue I decided this neat design was much better with some satisfying print-in-place magnets instead. The original design by jdegs has an openscad implementation so go there if you want to modify the mesh. For this I…
I made this cookie cutter for my friend, it has two parts - one that cuts and second that imprints the details into the dough. Printed on Bambulab A1, 0.4mm nozzle, 0.16mm layer height, slow speed (40mm/s).
This is slightly longer than the original, fit my mounting plate better. I could not match the corners from the original due to the printing overhang angle. Use PETG for outdoor use, loctite 401 for PETG will make a great bond, use expoxy…
Knob for an FM Mattsson Garden valve, it is supplemented with a G1/2" thread so that you can screw it onto a Gardena coupling that you probably have with you. PLA with standard settings have worked for me so far.
This is a cover for the non trackpad side of bastardkbs dilemma keyboard. as far I can see, original designed by Frapiscide https://github.com/Bastardkb/Dilemma/tree/main/mechanical/community%20mods dilemma keyboard…
To do this properly, you need to do a filament change at the first layer of detail. I'd like to re-do it, on my printer the black is too thick, obscuring some details. If you print it better, I'd like to see it.
Travel Spacer Blocks - Seastar Outboard Steering Struts I preinted in petg, works well enough. TPU would be ideal.
This is to connect two double height Merten Aquastar boxes side-by-side. The connector is inserted from the backside and holds the two boxes together.
The original baskets of my old poles had, over the years, got cuts and bruises. Some years ago, when one of the baskets had lost 3 of it's five wings, I decided to make new ones while I still had the originals as a pattern. I have skied…
Allows carrying the UltraStar disc (potentially other discs too) on the outside of a backpack. Test before real world use to ensure the clip holds the disc securely. Tested with TPU 95A and 58D (best).
This is Astaroth's Axe (Kulutues) from the Soul Calibur video game series (copyright Bandai Namco). Category: Props
This charger works for NP-40, NP-50, NP-95, NP-120, K3001, DB-L50, D-LI7, DB-43, and BP-1500S batteries used by Fujifilm, Toshiba, Pentax, Ricoh, Minolta, Contax, and ORDRO cameras. It also works for the Doxie Go SE scanner battery.
The Aluminum throttle mount that came with my boat, was too wide for my Bimini Top poles, pic 4. I designed a mount that was an exact fit for my SeaStar / Teleflex CH2600 & CH2700, it provides more space along the rail and also fits…
Sacrificial skidplate for the bumper found here: https://www.printables.com/model/1569599-torque-bumper-for-xr NOTE: V1 is discarded. V2, just like V1 is a horror to print due to the large chamfer. V4 is better printable but not optimally…
If you have a Bosch Aquastar tankless hot water heater that stops powering the igniter circuit, this part may save the day and a few hundred bucks in replacement parts. To test if this fix will work for you, simply hold a neodymium magnet…
para evitar residuos de carton
Idea I wanted hooks at the back of my IKEA LASTARE wardrobe, so I bought a ATARLIDEN wardrobe rail. Unfortunately the existing brackets allow to mount it in the middle of the wardrobe (use with clothes hangers) only. Brackets I printed…
Náhradní díl spojkoveho pedálu tištěno na 100%výplně z PETG
Detailed 3D printable Chibi Version Of Omastar Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
This is a simple handle for the IKEA LASTARE cabinet. Fixed by the small clear plastic rivet damper. Printed upright in PLA with 2 perimeters, 0% infill, 3 bottom and top perimeters. I used a small brim for better bed adhesion. Happy…
It's a pain in the ass to print, do it on your own risk. Currently trying to optimise it for SLA.
Sacrificial skidplate for the bumper found here: https://www.printables.com/model/1569599-torque-bumper-for-xr NOTE: V1 is discarded. V2, just like V1 is a horror to print due to the large chamfer. V4 is better printable but not optimally…
If you have a Bosch Aquastar tankless hot water heater that stops powering the igniter circuit, this part may save the day and a few hundred bucks in replacement parts. To test if this fix will work for you, simply hold a neodymium magnet…
This replica of the famous location of Sedletz monastery in Kingdom Come Deliverance 2 is for your bathroom to hold all sorts of things, toothpaste, toothbrush, nail clippers, and especially, your Phillips one-blade razor! It has three…
Astarion's starting gear Belt Buckle from Baldur's Gate 3! This listing is for the digital .STL files ONLY. The belt buckle is approx. 8cm at its widest point, and the 2 sides are designed to clasp/hook together. We resin print these…
I saw that no one was making mini 13 space marine stuff and I was bored so I had time to make a mini 13 astartes (only works with soozafone's mini 13)
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Astarion Ascendant outfit form Baldrus Gate 3. The supports required.…
Bolter Rifle from Space Marine 2 WH40K Perfect replica in 4k quality sliced, whole bolter 5 parts bolter + magazine By default size (primaris) need big printer to fir like Prusa XL, At 78% human scale fits most of CR-10 similars.…
Astarion's starting gear Belt Buckle from Baldur's Gate 3! This listing is for the digital .STL files ONLY. The belt buckle is approx. 8cm at its widest point, and the 2 sides are designed to clasp/hook together. We resin print these…
Astarion's starting gear dagger from Baldur's Gate 3! This listing is for the digital .STL Files ONLY. The dagger measures approx. 37cm in length, with an internal channel for a 6.3mm/quarter inch rod for extra strength. Split for…
For Pastry Mould Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 1.2 Infill: 20 Filament: No Brand ABS Category: Kitchen & Dining
My dad's grinder work surface was getting increasingly worn down and hard to use - and since Glastar is unfortunately no longer in business, brand new work surfaces are increasingly hard to find. It seems a real shame to have to buy a…
