1 / 3
Gauge mount/holder to fit Vivaro/Traffic/Primastar vans — image 1
1 / 3

Gauge mount/holder to fit Vivaro/Traffic/Primastar vans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 52mm gauge and original lock switch mount/holder for Vauxhall/Opel Vivaro, Renault Traffic and Nissan Primastar vans.

Rating
0 / 5
Likes
7
Downloads
36
Makes
0
Views
794
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

52mm gauge and lock switch mount to replace stock switch panel. The original lock switch clicks into place as per the original panel and the the whole gauge mount also clips into place in the original dash piece. The included gauge back plate is designed to allow both M4 and M3 studs at various spacing due to the print in place sliders.

Print instructions:

Please refer to the attached .3mf for part orientation and print settings. Supports are not needed if oriented correctly as custom supports are already in the models for the main mount clips. It is recommended to print the parts in PETG as that is what I have tested and proven this design in to ensure correct flexibility of the clips.

Tags