Counting matching models…
Atari Joystick Box. Add your own booleans to make magnet holders. This is intentionally left unfinished so you can resize the joystick then add your own magnets to make top magnetically adhere to bottom. Feel free to post your…
🎮 Atari Joystick Grip Ball – Support-Free Print Design Upgrade your classic Atari joystick with this custom-designed grip ball, crafted for a snug fit and smooth handling. The model prints cleanly without supports, and a tiny vent hole…
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged. Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This second set consists of my nine favorite Atari…
This is a digital 3D printable model of Katarina's Mask and Daggers from the League of Legends Noxus cinematic trailer. 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) All cut parts are placed on…
WORK IN PROGRESS 23-Mar-2026 - Updated with better rounded edges, orientation and button function. A retro mouse shell that can house a Logitech M185 innards. This recreates the look and feel of an Atari ST mouse but with the additional…
This wallmount is actually for a 100% homebuilt game controller that is compatible with the common Atari 9-pin joystick format of the 80s and 90s. In other words many Commodore, Atari, SEGA, Sinclair, MSX etc systems of the era. I've…
The Atari 800 computer has a cartridge door that springs up when the latch is pushed. The latch has a spring made of a flat, bent piece of metal. When the case is intact this spring is retained by two surprisingly thin plastic posts. 40…
Introduction This is a two-part only case for the FujiNet v1.3 device as sold by The Brewing Academy. The original case requires an assembly of four parts (plus the two connectors), while this one only requires front and back and the…
These are Atari 5200 video game cartridge storage cases that I created in Tinkercad with labels, the tops fit secure and snug with no supports. Most of the files I created are also on Thingiverse https://www.thingiverse.com/thing:4554877
As a kid of the 70s, I enjoyed playing games on Atari 2600 and Atari 800 computer systems using the joysticks that came with the 2600 systems. Fast forward to now with Retropie and emulators, I wanted the real game experience with the…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade I made a green TPU cover for the new stick, but…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade The rubber boot for my old controller was in extremely…
Da das Atari 2600 leider von Haus aus keine Composite Anschlüsse besitz und die neuen TV Generationen keinen Analogen Antennenanschluss mehr haben, ist es schwierig die Konsole an ein TV Gerät anzuschließen. Im Netz gibt es viele…
Da bei meinem Atari 2600 Jr. leider ein Stift zum Öffnen des Cartridge Schutzes abgebrochen war und die Stifte leider am Gehäuse sind, suchte ich eine Möglichkeit zur Reparatur der Stifte. Leider kann man die Spielkassetten mit…
In my attempt to find a way to organize my Atari games, I purchased an older CD storage tower. I was not happy with just stacking the games on the shelves, so I designed an insert with slots for the games so you won't have to worry about…
Just push onto the original metal lever. Fuzzy skin with 0.2mm/0.2mm looks good when printed on textured printbed upside down, normal looks better when printed on glossy/satin sheet. Top drive is with the printed lever/bottom has…
Coaster set for Ken Mills' Atari Joystick - NO AMS I wanted to have some cool retro gadget in my gaming room, that is when I've found Ken Mills' Atari Joystick ring holder:…
— english text below — Zařízení umožňuje připojit ke sběrnici Atari více zařízení současně - např. SDrive-MAX, magnetofon, floppy, tiskárnu a další periferie se SIO konektorem. Podrobnosti česky zde: https://3d.odkaznik.cz/sio-splitter…
Podrobnosti česky najdete zde: https://3d.odkaznik.cz/sio-m The socket is used in all types of 8-bit Atari computers and their peripherals as an SIO bus connection point. The socket can be used to build modern peripherals or used as a…
Simple, low-mass models for stacking up Atari VCS modules. Print 3x of the body stacking clip , and 2x of the power supply stacking clip . I recommend PETG. Stock PrusaSlicer settings are fine: 2 perimeters, and 15% grid infill. Source…
Visit Jerrari3d.com for more related projects _________________________________ The RETRO GameStack system is a fully customizable and modular storage solution designed specifically for your Atari 2600 game cartridges. Unlike pre-made…
This is Work in Progress Remix of Arcade Stick It is intended for Atari Jaguar, but it can be used with any console.
In an attempt to free more space on my retro games shelves, I have been finding these sorts of cartridge racks and printing them. Then I started making some. This is my Atari 5200 cartridge rack. It did free up some space on my shelves,…
Jimmy Ipock's cartridge mod for the Atari Flashback 2 is a neat little mod... I just wasn't a big fan of how much epoxy you had to use to install it, and how permanent a solution that would be. (Lord forbid anything breaks) So I decided…
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
A desk decoration of the Dragon from Adventure. Layer height: 0.15mm Infill 20% Perimeters: 3 Custom Supports (Area around dragon neck is thin, remove supports carefully!)
_____________________________________________________________________________________________________ Parts _____________________________________________________________________________________________________ Part Quantity Link PLA Black…
Susuwatari keyring I made for a friend and thought many people would like it here as well.
a modified version of the Atari 800XL Display Stand to support the Atari 2600 Junior.
A simple drink coaster inspired by the classic Atari joystick. This model is designed to be printed on a multi-color printer. I recommend printing face-down on the print plate for a smooth consistent surface.
A simple drink coaster featuring the Japanese Atari logo. This model is designed to be printed on a multi-color printer. I recommend printing face-down on the print plate for a smooth consistent surface.
A mount that allows you to hide the adapter inside the case, and also brings out the sound output on a chinch connector.
It uses 5 red cherry mx switches, 5 keycaps, 4 suction pads and a joystick cable.
This is a shell for the version 3 pcb of the Sidecartridge: https://sidecartridge.com/products/sidecartridge-multidevice-atari-st/ This shell only fits the version 3 pcb and assumes that you have flush solderied the Raspberry Pi to the…
Notes Fits my display stand for the Sega Game Gear in height and vertical angle.
Since I started to play with Atari ST emulators, Aranym and Hatari, about 10 years ago, I always had the objective to build a computer booting an Atari system with the highest compatibility possible and with strong performances. The…
C'est un porte clef basique mais efficace qui permet de ne pas perdre ses clefs.
Atari CX-10 Joystick Button Alignment Jig After countless tries at aligning the new domes for my vintage Atari joysticks I gave up on eyeballing them and designed this simple two-piece jig. It lines up all five triangle-dome buttons the…
ALPS Switch Conversion Plate for Atari CX-10 Convert your Atari CX-10 joystick into an Alps-switch joystick! Choose between two plates: What’s Included CX10_Alps_High.stl — raises switches for instant clicks , but more sloppy (will press…
No screws needed! Click on system. Because of durability, best print from PETG or ABS. Beware of the top clamp when assembling - it's fragile! It has to be thin because of the construction of Atari 800/600XL back case. Greetings to krupkaj
This is a little shelf/rack for holding Atari 2600 and similar-size (e.g. 7800, possibly others like Intellivision?) cartridges. I intended it to be easy to print and easy to stack/superglue together as needed. The default model holds 4…
Atari Joystick Box. Add your own booleans to make magnet holders. This is intentionally left unfinished so you can resize the joystick then add your own magnets to make top magnetically adhere to bottom. Feel free to post your…
Needed a simple sign to go above an Atari game display so made this version of the logo as a sign. Can be printed single color or multicolor.
There are 2 holes for M3 thread inserts. Printed from PETG.
This is a shell for an extension or adapter for the Atari XE or Atari 520ST. The Atari XE has joystick ports hidden inside its case, so it is not possible to use standard Dsub9 cables. However, it is possible to make a short extension…
A simple cover for the Amiga / Atari ST Usb mouse & Usb Joystick/Gamepad adapter from ikonsgr 80's Home Micros WorkBench: Amiga / Atari ST Usb mouse & Usb Joystick/Gamepad adapter
Update 04/08/25: After an excellent idea was put forward by Rainer (ArKay74), I set to work splitting some parts so that you could print the two tone colour scheme without owning a multi-colour printer. There are six new STLs with the…
A chibi deformed model of Siegmeyer of Catarina, a famous storyline NPC in the video game Dark Souls. The model won't balance well due to big head. It needs assistance (e.g. double-sided tape or combine with a base) to sit steadily. Lower…
🎮 Atari Joystick Grip Ball – Support-Free Print Design Upgrade your classic Atari joystick with this custom-designed grip ball, crafted for a snug fit and smooth handling. The model prints cleanly without supports, and a tiny vent hole…
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This first set is of the initial nine games that we…
Straight from the fire-scorched world of Lothric in Dark Souls III , Siegward of Catarina makes his noble entrance into your 3D printing lineup! Known for his unmistakable onion-shaped armor, his valor, and his unmistakable…
Printed on CoreOne diagonally. Support: yes Infill: 15% Wall : 3
I got an Atari 2600 My Play Watch for my birthday. It comes with a little magnetic USB charging cord. This stand has a slot to allow you to insert the charging cable into the stand, so you have a good place to charge the watch when you're…
Atari 2600 SNAC case. Switch lever will go through thick lever stay first and then through case then through thin lever stay. Use the thin lever stay on the inside of the case. Carefully push the switch lever through the stay from the…
I made this holder so I could store my Atari VCS/2600 cartridges inside VHS clamshell boxes. The holder is the size of a VHS tape, so you can just drop it in, but I suggest gluing it to the case so it doesn't rattle. Category: Toy & Game…
ATARI ST Mouse Kit is a shell that fits Wireless Mouse Components Kit 002 . There are 3 versions included. With Atari logo, no logo, and ZX logo ( LOL :) ) https://eu.store.bambulab.com/products/wireless-mouse-components-kit-002 Buttons…
ATARI ST with working wheel and 4 buttons in combination with Wireless Mouse Kit 002. https://eu.store.bambulab.com/products/wireless-mouse-components-kit-002
Atari 2600 Display Stand About This display stand is made to hold the Atari 2600 Console in an upright position while providing you with a slot to stow the hardwired cable and two slots to display cartridges in either an upright or…
Atari 2600 Game Cartridge Holder About I've had my old Atari 2600 games sitting on a shelf disorganized for years like some sort of monster. I recently finally decided to do something about it and blah blah this model. This game cartridge…
Print just like shown with supports, much stronger than factory and works great for original Atari joysticks! No obligation at all, but if you like this model, you can Buy Me a Coffee .
This is a simply Atari logo that I made in Fusion360 to print and display alongside my 2600 and cartridges. I'm including the STL and 3MF so that you can resize and whatever. My print was made in Elegoo Red Matte PLA.
This model uses Atari 2600 standard cartridges to make wall art. It also has (optional) provisions to display enamel pins along the borders. To assemble, place M3 nuts in the slots of the bottom and mid sections, and tighten sides on…
I style Atari ST case for your Gotek. Fit and stay on top of the computer case. FOR OLED DISPLAY 128x64.
This is a simple knob to upgrade the knob on the gamestation go. It's pressure fit. I sized it so it wouldn't interfer with the buttons. Just carefully press over the existing knob. Should be able to pull straight up to remove with no…
I made this model myself as I quickly have gotten obsessed with atari's, specifictly this model.
If you happen to have a copy of Traumatarium Deckulus and also want to protect it from wear and tear, I imagine you’d want to sleeve those cards. This case provides for that scenario and also provides a holder for the dice you’ll use (if…
I printed this in TPU to replace the degraded belt, and it worked! Be sure to meticulously clean away the sticky residue left behind by the old belt. How long will a 3D-printed replacement motor belt last? I don't know. Mine hasn't broken…
This is a simple one piece print for the dongle style PCB. It locates into the Atari ST Slot, is Poke-yoke to ensure it fits only one way. 2 M3x16mm Capscrews self-tap into the print to hold the PCB in place.
A vertical stand for the Atari 2600 Junior. OnShape Model https://cad.onshape.com/documents/6043124feb1ec9e03cd9821c/w/673d51ce4c1a4b12c6c4f411/e/246e58b5f3bfc448e476602c?renderMode=0&uiState=66ab55da2df1833a233293e4
MiSTer FPGA Atari SNAC Adapter Shell with logo Snap-fit enclosure, versions for one or two filaments. Gcode in zip for multiple filament version with five minute pause for manual filament change after the logo is printed. Doesn't contain…
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged. Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This second set consists of my nine favorite Atari…
This is a digital 3D printable model of Katarina's Mask and Daggers from the League of Legends Noxus cinematic trailer. 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) All cut parts are placed on…
I purchased a new Atari 2600+ Pac-Man Edition and several new games, and wanted a holder that not only stored my cartridges but also the instructions. I designed this holder to be printed on a Prusa Mini+ without supports. It is quite a…
The primary screen on the Gotek is not really convenient to use. Hi$c@n wanted a way to add a remote screen on top of the keyboard for a easy reading, that's why I designed this minimalistic bezel. It's non-destructive : be sure to use…
WORK IN PROGRESS 23-Mar-2026 - Updated with better rounded edges, orientation and button function. A retro mouse shell that can house a Logitech M185 innards. This recreates the look and feel of an Atari ST mouse but with the additional…
The original sheet metal bracket often corrodes and needs to be replaced with a new one. Here are versions for 1x 3mm LED and 2x 3mm LED in case you want to signal disk operation as well.
I recently got the Atari Jaguar and I absolutely hated the D-Pad. Here are drop in replacements to help fix this issue and have a much more enjoyable experience. There is a Universal version that works well for both version of the Jaguar…
This wallmount is actually for a 100% homebuilt game controller that is compatible with the common Atari 9-pin joystick format of the 80s and 90s. In other words many Commodore, Atari, SEGA, Sinclair, MSX etc systems of the era. I've…
Y ou can use this model in a variety of ways! Use cases: decorate your shoelaces decorate your sweatshirt a bead for bracelets a hair bead a bead for earrings you can also use it on a pencil or pen Just SCALE as you like create and have…
1:3 scale model of the Atari 1050 floppy drive ( http://www.atarimuseum.com/computers/8BITS/XL/xlperipherals/atari1050.html ) This should fit an SD card reader similar to this one, once removed from its plastic case:…
Modeled after the Atari 800XL at 1:3 scale.( http://www.atarimuseum.com/computers/8BITS/XL/800xl/800xl.htm ) This case fits (with small mods, see below) the Raspberry Pi model A+. To get the A+ to fit, you must either remove or cut down…
The Atari 800XL: http://www.atarimuseum.com/computers/8BITS/XL/800xl/800xl.htm Category: Computer
A work in progress, this is a 5'' floppy drive by Atari, for the 8-bit series of Atari computers. http://www.atarimuseum.com/computers/8BITS/XL/xlperipherals/atari1050.html Category: Computer
~5"/~130mm Diameter Atarigane/ Kane for quiet practice. Will upload photos when I get a chance.
Unleash the deadly elegance of the Noxian assassin with this stunning 3D printable figurine that captures every dynamic detail in premium STL format. This masterfully designed statue showcases the blade-wielding warrior in her iconic…
This is a Mounting Kit for a 4 Pole Female 3.5mm headphone jack, to solder into a Composite Video Mod, intended to replace the Atari 7800's RF modulator. The idea is, instead of drilling holes into your 7800, you would replace the RF…
