337 models
Náhrada za kovovou M-LOK matku (např. pro použití na airsoft replikách). Neobsahuje závit (šroub si ho vyřízne). Materiál: PLA/ASA Parametry tisku: Perimetry: 2 Výplň: 100% Výška vrstvy: 0.15mm ---- Replacement for the metal M-LOK nut…
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
Rowan Atkinson, Mr. Bean Meme
Náhrada za kovovou M-LOK matku (např. pro použití na airsoft replikách). Neobsahuje závit (šroub si ho vyřízne). Zmenšen vnitřní otvor z M4 → M3. Materiál: PLA/ASA Parametry tisku: Perimetry: 2 Výplň: 100% Výška vrstvy: 0.15mm ----…
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
Filament need cca 7-30m. Use brim. Size width x lengt (mm) 42x141 (A,H), 70x164 (B,I), 60x197 (C,J), 100,x212 (D,K), 72X215 (E,L), 120X229 (F,M), 160x229 (G,N), 55X180 (O), 75X183 (P), 64X188 (Q), 98X189 (R), 90X223 (S), 128X221 (T),…
Piston imprint cutters. When you need use glue for hard plastic (UHU, Tamiya...).
[EN] Screw and nut (M14, M16) for testing purposes, can be used as a children toy. Dimensions: M14: 25 x 22 x 45 mm (length, width, height) M16: 28 x 24 x 45 mm (length, width, height) Material: PLA Layer height: 0.2 mm Infill: gyroid (15…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
Ide o dekoráciu určenú na zdobenie. Je to niečo, čo si môže užiť každý! Je to veľmi jednoduché. Výška dekorácie je 19 cm šírka 22cm. Pred vytlačením, si pozrite pokyny pre tlač. Pokyny pre tlač Orientácia decoracie pri tlači by mala byť…
Size lenght x width (mm) A,B 115x45(59). C,D 150X63(102). E,F 180x96(147). Tested PLA 0,2mm, 2 wall loops, 15% infill. Use flexible material. Next model:
Filaments can be used such as PETG but then you might need to add some coating inside the resevoir to prevent the water from leaking. But I printed mine in PLA, and i have no leaking, so i would recommend to print the base “resevoir” in…
I created these with Tinker Cad, you can use these to transfer your Gardyn Y-cubes to jars to use with the Kratky style of hydroponics. Kratky is a method of simply adding nutrient solution to the bottom of the netcup (or in our case the…
Originální dárek na Den Matek. Matka roku pro všechny mámy. Na výběr je ze dvou verzí “Matka roku” a “Mamka roku”. Tiskněte dle libosti, klidně zvětšete nebo zmenšete. Při přílišném zmenšení může být problém s rozlišením textu. Doporučuji…
This adapter system wraps the edges of a GRATKIT 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable GRATKIT nameplate…
print with 100% infill if you like my work, please buy me a coffee: https://www.buymeacoffee.com/kopanicak
feel free to remix
Přepážky jsou na několik modelů. Č. 1 a 2 jsou na typ A, kdy č. 2 je zůžená verze pro rychlejší tisk. Č. 3,4 a 5 jsou pro krabičky typu B a C. Č. 3 je klasická přepážka. Č. 4 je přepážka s drážkami. Č. 5 je zůžená přepážka s drážkami, ta…
This is a simple model that prints with about 8g of filament, without supports. Print with the flat side down, .20mm layers, 4 walls, no supports. Fits up to 9 on a 210x210 plate. The holder for the rockwool cube does not have a bottom,…
Pridal jsem variantu s nalitky na prepazky.
This is a modular tray system that allows plants to establish root systems via a Kratky growing method. This allows users to bring struggling plants inside or into a more gentle environment under high intensity grow lights should they…
Praktische Box für den Kräuterschrank in der Küche um übersichtlich und platzsparend Salatmischungstüten (Knorr oder andere) aufzubewahren. Das Modell kann stehend ohne Supports gedruckt werden. Die herausstehenden Buchstaben können bei…
This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…
This is my first print share, so I'm new to 3D print. I wanted to print some useful holders for my pegboard from the Czech company Mars Svratka https://mars-svratka.cz/produkt/nastenny-panel-30 I was searching for the Internet, but almost…
Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
This is a functional and modern looking hydroponic vase which can be used for passive hydroponic methods such as Kratky's (or non-circulating/ passive hydroponic). I designed this vase to be fast to print and leak-proof right out of the…
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I watch Hoocho on Youtube and they…
Print it in a darker color to block light, filament type should not matter Print Stats: ~42m, ~9.9g of filament ($0.15) For the mini-cube netcups and their adaptor: https://www.prusaprinters.org/prints/60181-75-rockwool-mini-cube-netcup…
A simple remix of the original. I scaled it down from 3mm to 2mm thick to give the outer ring more thread to hold.
Ventilation grille used for ventilation of boat lockers
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. Pod holds seed starting medium (coconut fiber, perlite or vermiculite).…
Vykrajovačka na maslové sušienky v tvare prasiatka. Odporúčaná hrúbka cesta 4-5 mm. Odkaz mojej ženy :) : Pred vytláčaním namočiť do múky alebo práškového cukru:) (cukr moučka) Print instructions PLA Infil 100% Zapnúť detekciu tenkých…
a simple adapter to convert a mason jar into a kratky hydroponic setup. 2inch net cup and 1inch~ aerogarden clone standard mason jar
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas lopatku na kocici bobky. Je skvele uspusobena pro tuhle cinnost. Tisknuto bez podpor Pro kontakt pro případnou…
krytka matek pro přední a zadní kolo kukirin G3 pro
Držák speciálních vrtáků Parkside pro děrovanou stěnu Mars Svratka - pegboard
Figurka pro nejen modelovou železnici. Inspirováno radou Vacátkem ze slavného československého seriálu.
Simple holder for pegboard. Fits into the bigger “keyhole” like the hole of some pegboards. I was searching for the Internet, but almost all holders for pegboards are designed for the small holes and not for the “keyhole” like which I…
Designed to slide over the GratKit Cardboard spools can be printed in either TPU or other materials if printing in TPU reduce scale to 98.5-99% and stretch over the reel tested in PLA but should work in other materials
Simple, friction-fit lid for regular mouth mason jar lids. This will secure a 2" net pot to a regular mouth mason jar lid, and allow you to unscrew the whole contraption together for refills. I printed these with a 0.8mm nozzle for one…
Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Update 2020/06/23 Adding a rockwool_pebbles_pod.stl file, which is basically the same as the previous rockwool_pod.stl but now you can put some clay pebbles at the top to keep the plant straight. I noticed it was necessary after some…
A few months ago I saw the #Kratky planting method. Since I wanted to grow the basil for my Neapolitan pizzas myself, I had to try it out right away and started with some tinfoil-wrapped mason jars . That worked well, but was imho too…
Modular Kratky Hydroponic Planters , designed for enthusiasts and eco-conscious gardeners alike. These planters are specifically crafted to cultivate small houseplants and herbs, adding a touch of green to your living space or kitchen.…
Krytka kolesovej matky pre vozidlá Škoda 105,120,125,130,135,136 Rapid, Garde. Print instructions Vhodné talčiť z materiálu PET-G alebo ASA.
I ran across the Gratkit Firefly filament dryer and it checked my boxes - reliably gets up to heat, actually dehumidifies filament per independent tests, and offered an interesting control solution that I can hook into Home Assistant. One…
Standard litter scoops were too coarse to clean the litter of smaller pieces, also are too small to allow quick clean of litter box. Bucket is designed to fit the scoop inside it in order to save some space, just put a bag in the bucket…
Simple hook for pegboard. Fits into the bigger “keyhole” like the hole of some pegboards. I was searching for the Internet, but almost all holders for pegboards are designed for the small holes and not for the “keyhole” like which I have…
vykrajovatko ve tvaru stromu vhodné pro pečení
Vomit bag - Vrecko na zvratky Vrecko je možné pripevniť pomocou teplovzdušnej pištole alebo gumičky
Držák pro spreje (vytvořeno pro WD40), možné využít pro podobný průměr základny. Vnitřní průměr 68 mm, vnější průměr a šířka 74 mm, výška držáku 65 mm.
Jednoduchá polička třeba pro tužky. Rozměry jsou 240x70 mm výška celková 40 mm. Výška “vaničky” je 20 mm.
The original model did not work with a 1.9L/64oz Mason jar. This fits snug, so it won't slide off. Print body in vase mode
For those that want to grow vegetables, flowers, etc. inside your house using a fertilizer solution/hydroponics. This is a shell(cover), cap, and pod for a Kratky Hydroponics setup. The shell is designed to use a 1/2 gallon BALL Jar with…
Jednoduchý držák pro pérové svěrky Parkside, vyzkoušeno i s Wolfcraft. Šířka držáku 140 mm.
I printed this model in Prusament PETG Jet Black with the 0.2 SPEED profile. To finish the assembly you need two 8x22x7 bearings and two washers with 8mm inner diameter. Every part except the main roller needs to be printed twice.
Kotevní deska je vhodná pro kotvení popruhů a tyčí stanů a markýz. Tyč je bezpečně upevněna mezi posuvnými jezdci a nemůže se v měkkém terénu propadnout nebo nadzvednout. Při stažení markýzy je možné tyč snadno vyjmout po odsunutí jezdců.…
Lid with a integrated netcup for use with Trader Joe's Apple Cider bottles (or other 40mm lid, twin threaded containers) Category: Outdoor & Garden
Více než tisíc slov :D
Držák pro očkoploché klíče 6 - 13 mm. Tištěno s podpěrami, ale pro číslice jsem podpěry zakázal. Tištěno na Průša PETG.
Organise your parts more conveniently in the MARS drawers with these dividers/organizers. From a single divider, up to 12 separate compartments, check out all the different version and find the one you need!
Hydroponic baskets for 33Cl can long and large version. Perfect for growing aromatic plants indoors.
These are 2.5 gallon bucket tops for kratky style hydroponics. the design is similar to my original 40oz pots https://www.printables.com/model/897855-40oz-kratky-hydroponic-pot-with-water-level-indica. There are several lid options for…
Meat net applicator, no support needed, I recommend PETG becouse contact with food.
A tiny funnel that is printed in Vase mode, without top or bottom. In Cura, it's enough to set Surface Mode to ‘Surface’. In other slicers you might have to manually set top and bottom to zero. I printed with 0.6mm wide lines; wider lines…
Drawer divider for storage cabinet from Mars Svratka. I use it for storage of electronic parts. Original dividers split the drawers only in one direction. When divided to 4 compartments the 0.5W resistors fit nicely into drawer. Print…
Vykrajovatko na pernicky. Na testo cca 0.5 cm tluste. Je lepsi mit testo na pernicky trosku sussi, a vykrajovatko hodne pomoucit, at se nelepi.
Nothing else changed - see short description, I have added also original version of left_frame_flex.stl with single bolt/nut per bearing. For 2kg support print left_frame_flex2.stl ! Nic víc se nezměnilo - koukni na krátký popis. Přidávám…
This is a mount to fix a heatkiller pump/reservoir combo on a Watercool MoRa 3. You need to print one of each parts. The two bracket halves are held together by 2 M3x30 bolts. There is no hex nut needed, the thread should hold well in the…
Łopatka ułatwiająca sprzątanie w formikarium. Model składany z dwóch części. Nie wymaga klejenia
Háček pro děrovanou stěnu Mars Svratka. Délka háčku je 70 mm (7 cm). Při tisku doporučuji použít podpěry (vyfocený výtisk je bez podpěr na stoupání a nedopadlo to zrovna dobře, ale mě to stačí, trochu jsem to pobrousil :-) ).
Krabička určená pro sadu mikrovrtáků Parkside, možné použít i jako krabičku (poličku) všeobecně. Vnitřní rozměr je 90x33 mm, výška úložného prostoru je 20 mm, celková výška je 43 mm. Přiložen je soubor s předním nápisem “Mikrovrátky”,…
Dvě poličky, které když se dají vedle sebe, zaberou celou šířku jedné desky děrované stěny Mars. Proto mají rozměry 197x150x50 mm. Samozřejmě se dá vytisknout i jen jedna. Doporučuji tisknout s podpěrami vzadu (na “háčky”). Toto konkrétně…
I use Cz Garden's 2" net pots: https://www.amazon.com/dp/B073WJFHQH?ref=ppx_yo2ov_dt_b_fed_asin_title Has an inner diameter of 53mm and an outer lip so it doesn't move too much over the top of the mason jar. Printed in PETG.
Tak toto je moje prvotina co jsem vytvářel ve Fusion360. To je tak když si poskočíte na stole (ano i na stole se dá skákat - neptejte se proč), rozbijete původní díl a narychlo to potřebujete spravit tak aby na to šéf nedošel :-) Patka…
do dílny pro malé děti, velké šrouby s matkami a klíčem
replacement part of lost part of the cross-country ski bindig Náhradní patka vázání. Vázání Fisher, systém rottefella
Zębatka do całej grupy PSA Citroen Peugeot Renault Ford Fiat i innych koncernów stosujących silniczek Valeo F663746X podczas uszkodzenia najczęściej pada ta zębatka.
pomocnik na vanoce
https://youtube.com/shorts/-M8ch4d2bds?feature=share Rockwool Starter cubes: https://amzn.to/45pvu8w eSun PLA+ Filament: https://amzn.to/3BL3You Help support the channel by making purchases through the above Amazon links. As an Amazon…
Just a fidget toy I designed. I'd seen similar but didn't like them as much, so designed my own as a 'learning fusion' self challenge. I'm sure I could make it much faster and more efficiently today. After a while I decided to put a logo…
Kompaktní lopatka do dílny
Patka nohy regálu z OBI +- 35mm s plným rohem a čočkami pro řádné zachycení na profilu.
Držák vrtáků o průměrech 1- 13 mm. Díry jsou o 0,5 mm větší než nadepsaný průměr (tedy pro 2 mm je díra 2,5 mm).
Ratkin sculpt based off a character in the book Legends and Lattes.
This is a simple 4mm gap spacer used for setting proper distance on ATK Freeraider / Moment Voyager bindings. Category: Sport & Outdoors
Ložisko z-axis-trapézové matky motorů
Maximize your growing space with our innovative Corner-Mounted Modular Kratky Hydroponic Wall Planter. This space-saving design is perfect for those looking to bring a bit of nature indoors without sacrificing floor space. Its sleek,…
Rowan Sebastian Atkinson Buste Ce buste représente Rowan Sebastian Atkinson, acteur et humoriste britannique mondialement connu pour son personnage emblématique Mr Bean. Inspiré de la photo la plus populaire du personnage, ce modèle…
Držák na sluchátka pro děrovanou stěnu Mars Svratka.
3D Elevation Model of Atka Bay, located near Neumayer Station in Antarctica. The model is created from elevation data taken from REMA (Reference Elevation Model of Antarctica), which you can browse interactively here:…
I wanted a pot i could see the water level without letting a lot of light in. This works out cheaper and better than mason jars. It only requires a small piece(13cm) of ¼ inch id tubing, for the water level indicator, and a 2 inch or 50mm…
