Counting matching models…
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the sixth and final ship of the six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the fifth of six ship models design to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Added a color change at 2.2. Gcode attached.
🇲🇽 Welcome to Mexico! This is a companion model of the Ancient Ruins Collection - Mesoamerica entry of Tula . Atlantean figures are carved stone support columns or pillars in the shape of fierce men in prehispanic Mesoamerica. This…
Clanmate asked me to design this. You will need 6.35mm (0.25in) dowels in many locations to hold it all together, including a big one straight down the center. Over all length is 39inches. I used fandom measurements that the blade was 27…
MMU remix Costa Atlantica cruise ship
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
Atlanta Falcons Logo 1st Layer White 2nd Red 3rd Black
Time and material saving The model has been designed to enable fast, simple and material-saving printing. There are larger and more detailed models, but these require a much larger print area or the printing of several parts. Improvements…
A Stargate Atlantis Themed Door Controller that I remixed from a 3D model by "Ksst" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/d647c7413566a8e9fae947e64ee50374/Atlantis-motion-sensor I made space…
Atlantic sturgeon Originally, the Atlantic sturgeon was considered a worthless fish. Its rough skin would often rip nets, keeping fishermen from catching more profitable fish. Sturgeon were one of the types of fish harvested at the first…
This is a set of rock formations that will fit onto the main 4-6 player map of Guards of Atlantis II. It includes the 1 space, 2 space, 3 space & 4 space formations that I felt really mattered for the game. I did not make the back walls…
The original seal for my IKEA Atlant kitchen sink plug broke - it wouldn't stay open any more due to the corners of the little standoffs being rubbed off by years of usage. As there where only a few clunky 3d models available online i…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
Crafted specifically for 3D printing, my fan-designed Stargate Atlantis deluxe model brings the iconic sci-fi portal to life. Measuring over 27 inches (685mm) in width, the design showcases intricate detailing on both the front and back.…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
I've included my models for the main and secondary side buttons PCB in case anyone finds it helpful to create their own mod. That said, only the main PCB is tested for accuracy as that is the one I used in this model. For assembly, slide…
Originally started with the idea of recreating the Atlantis logo located in the City. I drew the logo in SVG to cut it out of the wood. See my final photo. To be able to share it with you, I made an STL version, you can also find the svg…
This is a remix of Fred's Dice Dagger.
The Ulysses from the Disney Movie Atlantis: The Lost Empire. Printed on my Longer LK5 Pro with raft and tree supports. Available to print as a whole or as two parts. My favorite movie growing up, I just had to have myself a model of the…
Sorry file is so small, Scale to whatever size you need and should still work fine. Hope you like it :D
BEFORE YOU PRINT! This is a very old model, meaning it's not very well made. Assembling it is quite a task. Also, it's made to be sunk, so there are holes in the bottom of the hull, but they can be plugged if needed. All parts are in the…
I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet
This is a display base for Stargate Atlantis, to replace the larger display base that came with the Stargate model. It is designed to be printed on a multi-color printer. For example a Bambu Labs printer like the AI or X1C with an AMS -…
I separated these from the original design to make downloads easier. Stargate Atlantis Glyphs, so you can now make an SGA Gate. I designed them to use 5mm LED's for the lights. Category: 3D Printing
I made an insert to put everything Atlantis Rising, including Monstrosities expansion and Orator promo, in a single box, with no lid lift. It fits sleeved cards (Mine are all sleeved with Swan PanAsia thick sleeves), but it's a tight fit…
The Atlantis Ring and its symbol are empowerment tools that help protect, balance and harmonize a person’s energy field. Its beneficial energetic properties help shield the aura and minimize the effect of harmful frequencies. It helps…
This is an insert for the phenomenal game, Guards of Atlantis II. It's not the most compact design, but that's not really what I'm going for here. This insert aims to do one thing: get the game out from the boxes and onto the table as…
Aquarium decoration with coliseum ruins in atlantide format, you can also just cut and use some part of the file. Printed without supports, but be careful the bigger it is the longer the bridge the extruder will have to make.
Just swap this file for the one in the original design files.
Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…
Box Insert for Survive: Escape from Atlantis! aka The Island and it's expansion (5-6 players + dolphins / octopus / blue dice) Made to perfectly fit in the original box insert. You need to print one of each file, except you need 3 times…
Printed on my LONGER LK5 Pro with raft and tree supports. I assembled the fins with hot glue and then left to cool. Blender 3.1 Eevee render
short video: https://youtu.be/2hrvMfrzNSI
A Stargate Atlantis Themed Wall Light that i'm designed for accent lighting in my TV/Game Room. I made space to add 12v led light strips under each crystal and room for running wires. Note: I have not printed/tested the design yet. You…
Sword has been separated into multiple parts to allow multi color model on a single color printer. No AMS needed. Blade has been redesigned to be more an edged design rather than rounded. Also been cut with dovetail joins for more…
Sub Pod Model from the movie Atlantis: The Lost Empire. Growing up Atlantis was my favorite Disney movie and I credit it for sparking all my creativity at a young age. I had started this model a year ago but only a few weeks ago did I try…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a keychain I made for the atl braves I hope you like.
Bow before your god! (Or at least, your 3D printer). Bring the menace of the System Lords straight to your print bed with this highly detailed, 3D-printable Goa'uld symbiote. Whether you are a loyal Jaffa, a disguised Tok'ra, or just an…
Here is the awesome looking Atlanta Braves Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used: https://makerworld.com/en/models/25960#profileId-639228 )…
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Here is the awesome looking Atlanta Falcons Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
Glaucus Atlanticus : Blue Dragon I would print this with a flubbery tpu. The Enigmatic Glaucus Atlanticus: A Celestial Dragon of the Sea Floating serenely on the ocean's surface is a creature of mythical beauty and potent danger: the…
Print with 2 walls and 30% infill for similar weight and feel. Try wood filament for the ultimate replacement.
I printed it at 20% infill on an Anycubic Vyper at a .15mm layer height and it turned out great! I printed the outside in Polymaker Blue PLA and the insert in Overture Silk Red.
Thank you for downloads, likes... Enjoy the model !
Seal rubber of iker Domsjö Atlant Print Settings Printer: Sidewinder X2 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Gyroide Filament: Transparent 95A Premium TPU 95A Translucid Notes: No. Category: 3D Printing
Stingray - Captain Troy Tempest, Marina, Lieutenant Atlanta Shore, Lieutenant George Lee Phones Sheridan - 1964-1965 3D printable model.
This is a chess game that you can take with you when taking a bath. The board consists of buoys. They are connected but still can move freely so it's ok to make some waves 😅 The board, with all pieces connected, is 62 x 62cm (24.4 x 24.4…
Atlanta Braves Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
Originally published here: Horned Idol from Indiana Jones and The Fate of Atlantis by tato_713 - Thingiverse Did you find a lock to match my key? . The double meaning phrase of Klaus Kerner at the beginning of the game. This is the model…
Stargate Atlantis - Dr. Rodney McKay - 2004-2009
Easy to print multicolor coaster with a simplified Atlanta Braves logo. Uses the same coaster base as my other coasters. 2 file options, one includes a 0.2mm gap for the logo design if you're printing these as separate parts, the other…
Atlanta Braves Crossed Tomahawks Oversized Necklace Logo that I designed. I hope that you enjoy!
Tomb Raider Atlantean Scion The Atlantean Scion is the central artifact and main plot device in the original 1996 Tomb Raider and its 2007 remake, Tomb Raider: Anniversary . Key Details What it is: The Scion is a powerful ancient artifact…
Stand for all kinds of smart speakers. It can also be used as a stand for flower pots or other items.
Boston Bruins NHL team golf ball marker (25mm diameter by 2mm height and a 10mm spike). 2 versions available (embossed for SLA and single filament printers and a multifilament version for multifilament FDM printers). Usage Place on the…
Пробка ремня безопасности Соллерс Атлант
A Classic of Engineering Decorative Art Chassis-No. 57.591 (R. B. Pope) For quite some time, experts all agree that the Bugatti 57 SC Atlantic Coupé belongs in the most beautiful cars that were ever built. Its streamlined body is a…
Remixed to fit on the ender 3 print bed. Added cable holes for wiring whatever you like https://youtu.be/mecSEW3xIug Added another top cover with a sensor hole for a APDS9960 gesture sensor Print Settings Printer Brand: Creality Printer:…
Stargate Atlantis - Dr. Radek Zelenka - 2004-2009 - 2 VERSIONS
This free MIT license Github repository allows you to convert Open Street Map data to an STL file ready to print! These stls are for Atlanta, San Francisco, and Manhattan. The initial stls were made incorrectly: buildings adding from…
Stargate Atlantis - Dr. Rodney McKay - 2004-2009
Toronto Maple Leafs NHL team golf ball marker (25mm diameter by 2mm height and 10mm spike). 2 versions available (embossed for SLA and single filament FDM printers and a multifilament version for multifilament FDM printers). Usage Place…
Stargate Atlantis GDO - Prop Print 1 of each part. Parts to buy M3x4mm Stainless Steel Hex Socket Grub Screws (for an authentic looking wheel) Category: Props
I have a big mug and needed an oversize coaster. I've been modeling the Stargate ring off and on for other purposes. (Like making a brake light for 2" hitch) Anyway, I figured this would work for a coaster with a 127mm (5") internal…
This is my "Atlanta Falcons Lightbox and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - Black Elegoo PLA - White Elegoo PLA - Grey Overture PLA - Fresh Red…
Atlanta Falcons Oversized Necklace Logo that I designed. I hope you enjoy!
This is a scale model of downtown Atlanta, Georgia, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
An Atlanta Braves jibbitz (croc charm) that doesn't require MMU. My print settings: 0.2mm nozzle, 0.05 layer height, 6 walls, 100% infill, grid supports, PLA, concentric top shell. Color changes at 7.25mm and 7.65mm.
-West Atlantic Bluefin Tuna from Atlantic Canada account for almost 10% of the global bluefin tuna quota. This species is designated as having ‘least concern’ conservation status globally, according to wikipedia. Thank goodness, because…
A toltec atlante statue figurine. I modified Jorge Cu's model over at Sketchfab to make the model symmetric.
Atlanta Braves Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
A Stargate Atlantis lifesigns detector prop design files and software. This is not a 1:1 prop replica, because I couldn't find screen which would match, but it is close enough. It was originally made as a reaction to one of my friends…
This 3D model represents a highly detailed tarpon , a large marine fish known for its elongated body and large reflective scales. The model features a streamlined, torpedo-shaped body designed for fast swimming. Its surface is covered…
Detroit Red Wings NHL team golf ball marker (25mm diameter, 2mm height and 10mm spike). Usage Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole. Printing Tips…
multi color atlantic puffin key chain for printing on the MMU or a similar device. I printed it in PLA in white, black and yellow
Please click ❤ LIKE ❤ if you appreciate my work 😊 Classic elegance and timeless design – now as a 3D printable wall piece. This Bugatti Type 57SC Atlantic model pays tribute to one of the most beautiful and iconic cars ever built. Its…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…
Capture a moment of heroic power with this 3D printable STL model of an Atlanta Gladiator. This striking warrior figure is perfect for adding a commanding presence to your displays or tabletop gaming scenarios. Usage & Links Personal use:…
🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
the 3D files are in no scale, so if you want to print in in a special scale you need to re scale them, need some work to make a finished Model especially the Window Covers i needed to rework with putty and sand them to fit. (my finished…
Just a small Falcons logo. I'm not a Falcons fan but the son-in-law is. This is similar to others available, but I did this one to fit my needs. This sign is 127mm wide by 97mm tall. Start with Black (.5) then Red (1.1) then Grey (1.4)…
Atlanta Braves Screaming Oversized Necklace Logo that I designed. I hope you enjoy!
www.patreon.com/bkprint3d
3D-printed character figure inspired by Kida from Atlantis: The Lost Empire . This decorative figurine captures Kida’s iconic look — her calm strength, open posture, and connection to the ancient Atlantean world. The figure works…
