Counting matching models…
A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of my portfolio, but the…
“Pup Tags” for the pups from the kids show Paw Patrol. V2 Update: Modified the outer tag height to be slightly higher than the inner design of all tags to allow for different colour filament to be used on the badge design vs the “shield”…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
My son loves Paw Patrol so I have these figurines. They can be scaled up as I have tested that but I have not tested it
The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…
Thank you for checking out my page! If you’d like to support my work, consider subscribing . As a member, you'll gain access to **all my designs** along with **commercial rights** to sell physical prints of them for as long as your…
Chase, Marshall, Rubble, Skye, Rocky and Zuma
Paw Patrol Skye A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of my…
very nice model of Skye from Paw Patrol. I printed with PLA and 0.2 layer , support and 5% infill.
Paw Patrol Marshall A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of my…
Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…
Vykrajovátkem nejdřív vytvoříte obrys a poté tvarovátkem vytlačíte požadovaný vzhled.
"Paw Patrol" Cookie Cutter (12 models) Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Marshall Stamp - 50mm x 76mm x 4mm Cutter - 59mm x 84mm x 12mm Rubble Stamp - 53mm x 72mm x 4mm Cutter - 61mm x 80mm x 12mm…
I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…
Paw Patrol Rocky. Reccomended to print with tree support: A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game…
I'm porting my design over from Thingiverse. You can see some makes there: https://www.thingiverse.com/thing:5146923/makes Most of this is easy to print. A few tips: Legs can be laid down on their side, with a tree support for the "nub"…
Print with single layered tree support A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an…
You can change filament colour manually (I used PrusaSlicer) or you can just paint them. At first I used only 2 colours to print them all at once, then adjusted the model a little (added more plasticity) and printed the new version with…
Split at the following layers heights 0-2mm Dark Blue 2-3mm Silver 3-4mm Red 4-4.6mm Yellow 4.6-5.2mm Light Blue 5.2-6mm White
I don't play League of Legends, but this design was requested by a friend who does. The sword also looks pretty cool, so why not? I printed this flat-side down with PLA in a 0.2mm nozzle and 0.08mm layer height. Although the details on…
výska vrstvy 0,30 vypln 0,20 PETG/PLA
V2: Remix of Toymakr3D's G1 Megatron to look a bit more like TF: Devastation Megatron (Permission granted). A majority of the files have been updated. Original file: https://www.toymakr3d.com/product/10-gunmaster-not-g1-megatron Support…
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
no special settings 0,2mm PLA
Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…
Let your child be part of the Paw Patrol. This model is based on: https://www.myminifactory.com/object/3d-print-paw-patrol-badge-multi-color-62997
Paw Patrol Mighty Pups Badges. made with Prusa mini no mmu required
Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…
Use organic supports and support blocker
Print instructions: easy print, see 3mf I have used variable layer height and ironing for nice results possible adjustments, like adding letter, like I did
For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…
These Cookie Cutters have the Shape of the Badges from Paw Patrol
I used Meshmixer to cut out a few more spots and the nose for a multicolor print. Printing time about 21 hours with Prusa MK3S+MMU2S with PLA, 15%Infill. How I Designed This Category: Toys & Games
can be printed together the model needs to be glued together or separately in other colours the albatros is very realistic Print in place kit card , Assembly required need to use a support
Lampička s obličejem Chase z Tlapkové patroly slouží jako lampička do dětského pokoje. Je ovládaná skrze kapacitní tlačítko, které řídí zvyšující (step-up) měnič pro LED pásek. V lampičce je umístěn i USB-C Li-Pol nabíječka baterií pro…
I made two doorplate versions of the Paw Patrol logo for my sons children's room. For a better printing I simplified the logo. Version 1 - MMU - 3D: Different heights of the color layers Version 2 - MMU - flat: A flat version, so you can…
Print at 0.2mm Layers, start changing after the second layer Color Order: Fillamentum Muhka (beige) DasFilament Kastanienbraun (brown) DasFilament Saphirblau (PETG via M Code) (blue) 3DJake pastell rosa (pink) 3DJake Gold (yellow) 3DJake…
print at 0,2mm layer height, change the color after the second layer. Color order: Fillamentum Muhka (darker beige) OWL Elfenbein (lighter beige) DasFilament braun (brown) 3DJake pastel Rosa (rose) 3DJake pink (pink) 3DJake weiß (white)…
Easy to print Paw Patrol Tags. These tags are roughly 36mm wide and 50mm tall. They have some dimension to them which would allow either for easy painting or a color swap during printing.
This is a 3d representation of the 2d Metatron Cube and its Sacred Geometry. It is also broken down into its parts, so you may explore its possibilities.
If you want the visor to appear, enable “Detect Thin Walls” If you DO NOT enable it, the visor will disappear (and therefore be “up” like the character normally appears.
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
Re sculpted this helmet based on the models from Jedi Fallen order. Feel free to use/modify/sell prints along as you credit me and link back to here. Just don't sell the file.
Design Concept The model captures the playful and energetic personality of a cartoon-style dog, inspired by children's animation. Use Primarily for decorative purposes or as a toy for children's playtime, encouraging imaginative play.…
I created simple template for Blow Pen Maker or Airbrush with Paw Patrol according to picture on internet, because original template is from carton or stronger paper and after a few used is damaged... Print Settings Printer: Home Rafts:…
Be a hero and print this for your daughter. Skyes pup pack and goggles, easy to print and easy to build. I made this for my daughter. She's 4 years old and about 1,05m. I have used pink fleece for the straps. The model should be easy to…
Description: This projectile can be used e.g. as spare part for the paw patrol water cannon. I hope you like the model! → Makes and Comments are very much appreciated :) Supports: On build plate only. A good option is to print multiple at…
Thsi is a simple little Transformers Megatron figure that prints best with a resin 3d-printer. Enjoy! Juri
Articulated Non Transformable MEGATRON Figure - Minimal Supports and No AMS "Peace through tyranny" Every hero needs a great nemesis and there's too many Optimi out there. So this aims to solve the quintessential issue of balance. You're…
This is a replacement back ramp for the "Paw Patrol - Paw Patroller Rescue & Transport Vehicle". Needs a Metal Coat hanger for attachment to the patroller. Print Cut coat hanger to size plus 3 cm on each end Bend one end at 90 deg. Insert…
We modified a human head (from lehthanis) existing to make it receive eyes animatronics The body is empty to receive the mecanism and spare filement The Eye is our version for the animatronics. We bring some changes as described in the…
Just a fun mashup I slung together. No supports needed. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson https://www.thingiverse.com/thing:3680027 **This design is uploaded with…
Meet the law of the lawn: the Police Gnome , your backyard’s fearless enforcer! With a stern look, a shiny badge, and a trusty walkie-talkie in hand, he's here to stop speeding bees, reckless birds, and any other critters breaking the…
This is a transformable Megatron figure that prints in just two pieces. No assembly required! It stands over 120mm tall and transforms from tyrannical conqueror to tank. No support material is required to print. This makes cleaning the…
i made a paw patrol sign for my kids. You need the spacer to mount an led strip.
I took the image of the Stencil Joker from Balatro and made a printable version. It was the simplest to do as the design was quite simple. I printed this with a 2-head XL. You could probably modify it so it can be done with a filament…
My kids really enjoyed the VR game ‘Waltz of the Wizard’ by Aldin Software. It features a character called Skully with whom you can interact with and generally be unkindly towards. I had already finished a project by Joran to recreate one…
Albatros D.III biplane fighter aircraft from World War I. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer Brand: Anycubic Printer:…
Skye from paw patrol! I really like the original model, however, it contains some additional bits on the paws of the dogs, so I made a remix with Skye with the extra part removed and flattened paws for better fitting on a flat ground.…
LEGO GUN BOAT - Print and play vietnam war
Harry Potter, Dementor, Patronum Wall Art
Let´s build it! 3D printed animatronic 51mm eye mechanism. Video - https://youtu.be/niRxJR1zGrg List of parts- 2x - Servo MG90D - s.click.aliexpress.com/e/_9Aj5xd 1x - Servo MG996R - s.click.aliexpress.com/e/_9xSPmB 6x - Linkage Stoppers…
Simple three-servo mechanism of eyes looking left and right and blinking. There is a build video on my YouTube Channel. Free to use, please share your versions and builds. There is a vacuum form buck for the eyeball lens. A one mm sheet…
My 4 years old daughter is a huge fan of Paw Patrol. To reward her on good actions I've created this token/coin. Blue is her favorite color, then I've printed them in blue. When she gets 10 coins she gets a small gift, but if she can wait…
The color scheme is the following and the PLA i used in this print: 0.00-0.40: White (DasFilament Tonweiß) 0.40-0.80: Red (Fillamentum Ruby Red) 0.80-1.20: Grey (Prusament Galaxy Silver) 1.20-1.60: Blue (DasFilament Toms Infinity Blue)…
A model of Metatron's Cube that I had on my computer. Print it by itself or use it as an embossment on something. I was cleaning up fusion after years of organizational abuse and came across it. Metatron is called the scribe of God (also…
Luftfilterpatrone für alle Simson Modelle
What is it? The is a hovercraft designed to be compatible with pup toy figurines from the popular children's series Paw Patrol. Big Version - Designed to fit all pups. Small Version - Fits the movie version of the pup (seen photo)…
Use the enclosed F3D.-file to replace the original name with the one you need. It´s a color-change print, so dont forget to change the color at 3.20mm. Use a pink-ish color first an than any silver color you have to achieve the look of…
A Multicolor remix (Open in OrcaSlicer)
2 Eyeball Animatronic hobby assembly. Using micro servos and an Arduino joystick. Inspired by Will Cogley
karoseria: infill 5% perimeter 2 ostatne diely: infill 20% Perimeter 2 šroby 3,5x15 4ks
Paw Patrol collection cutting edge height 10mm and imprint 6mm wall thickness between 0.9mm and 1.2mm
Spare part for designed for Marshall's Adventure city fire truck, but probably will work for other Marshalls truck as well. Some of Chase's trucks has similar devices so i included one for them too. I have printed it split in a half using…
Lets build this simple animatronic eye! List of material on the video description Help me keep creating projects and sharing the files for free, also, some Arduino codes, MP3 files and more are available on my Patreon:…
This is nicely printed in wood fill PLA on a 0.6mm nozzle. Infill 100% concentric. You may have to tune some coasting and combing settings to get good results with wood fill filament; you shouldn't have a problem with standard PLA. I…
Summary Printed on a Resin Printer but with a small Diameter Nozzle it should be no problem to print it on a regular FDM printer. The Parts are desinged to draw the Paw Patrolers on your cookie dough the cookie it self needs to be cuttet…
And the next one in the series of paw patrol multicolor prints….. RUBBLE. With a layerheight of 0,2mm and a 0.4mm nozzle, these are the colorchanges I did (All PLA): 0.00-0.40: Das Filament Tonweiß (white) 0.40-0.80: Das Filament…
The box for the badges. made with Prusa mini no mmu required
This is a coin for the Paw Patrol Jet and Command Center. It is used in the jet portion as a “projectile,” meaning these go missing around the house quite a bit. Performance is on-par with the original coins. There is one file for the…
Usage instructions: Github repository : https://github.com/gcr/balatro-slide-rule Plotting code : On Marimo I designed and 3D-printed slide rule calculator for Balatro! It can quickly multiply and divide numbers to help you calculate your…
This is a badge based on a trace of https://www.thingiverse.com/thing:1549561 I needed to do another badge for a friend's child and the other logos didn't look as nice. So I redid the design in OnShape. I printed it at 50% scale with…
Paw Patrol Cookie Cutter: Tracker, Rubble, Everest
Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…
✨Patronum de Harry Potter (ciervo lowpoly)✨ ¡Aquí tienes el Patronus de Harry Potter en su versión LowPoly, listo para imprimir y decorar! 🦌✨ Es una impresión sencilla pero con un gran resultado para cualquier estantería y el regalo…
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as…
A small stand for the cardboard Patrol tokens. We find that having the patrols elevated 1) makes them easier to find on the somewhat busy-looking board, and 2) makes it easier to see what's under the tokens. Print Settings Printer:…
Paw Patrol Skye cookie cutter and stamp
Soporte tipo lámpara para cuatro litofanías con luz led en la base. No requiere soportes. Fácil de imprimir.
As the Studio Series Megatron figure did not come with the tripple blaster I made one. 5mm handle. Should fit most transformers.
Build yours! Preparation - Download Eye46mm and build it - check the video for tutorial and required parts - https://youtu.be/S1RYJszkoVM - 0.16mm & >40% infill Part1 – Building the eyes mechanism – https://youtu.be/_w_gSTKBfmw Part2 –…
Connectors for tubes of 14x14mm and a wall thickness of 1-2mm.
![[OUTDATED] Transformers Devastation Megatron Conversion Kit](https://media.printables.com/media/prints/334966/images/2870511_8a181cee-b6c4-4097-b803-e5ad1a9b22af/large_display_2f5fea00-e34b-4f0e-9d44-10b9cc1c2fc0_334966.jpg)
