Counting matching models…
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…
This is my solution for attaching a scrub daddy to a cordless drill. This model features a 9mm diameter hexagonal bit connected to a scrub daddy holder tip. Should work with all scrub daddy sponges. I have the dual sided one. Works great…
Created a model for a airbrush cleaning jar lid instead of purchasing a cleaning jar separately. You can use whatever you like for the reusable filters and add a lid.
Connector to quick release connect to nato/picatinny rail. Requires 1 M3 x 12 bolt and one M3 locknut Mounting holes are for 2 M3 bolts, spaced 20mm apart Solidworks models are also attached if you'd like to modify Category: Hobby
My new improved Kärcher plug makes attatching the attatchment to your vaccum even easier
Combination of the left end cap of the light bar and a filament guide. Needs support for the end cap section. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: 3D Printing
Lesson Plan and Activity: With a partner, you will design a “3D” ceramics tool using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.…
Printer: Prusa Mini+. Material: Prusament PETG. Layer Height: 0.2mm. Nozzle: 0.4mm. Use atleast 50% infill. No supports needed.
Just like the original, but now it fits on a 40mm fan! The base attachment is compatible with Major Hardware's Airflow Amplifier Mount and uses a M3 screw and nut do fix the fan in place. The base v.1.1 has an additional mounting ring for…
Easy way to store a used poop bag so you don't have to hold it until next trash bin. Printed on Prusa Mini+. Using Prusament PETG 0.2mm. 15% infill. Link to double version:…
This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. I found that the original lens of…
This new waterer screws onto the hose for easy watering
Holder for small and large box cutters for the honeycomb wall
this is a Watering can attatchment for a wateringcan with a diameter of 35 mm
Now, I only included the modified parts - Meaning this DOES NOT include any of the original files of the paid parts in which to build the full product. Only my contributions to the extra designs to be compatible with the blaster. You…
These small pins fit into the fins of the Atomic Pi's heat sink. They can anchor a 60mm fan very nicely, without anything else, no screws, or other parts. Just 4 pins. Though a fan is not necessary on the Atomic Pi, it reduced the…
Uses a M3x10 or 12mm button head or phillips head or could be modified for a socket head cap screw. Attaches to the Dewalt 12v drills/impact/screwdriver and allows you to slide on/off a Wiha belt pack bit holder which uses a dovetail type…
3 modified files, one for ADXL, one for KUSBA, and one for a Wemos D1 Mini with a neopixel stick for WLED. If you have an ADXL I still prefer this mount https://www.printables.com/model/393558-neptune-3-pro-adxl345-mount-bracket as it is…
An attachment for extending the height of IKEA LACK and for stacking. Usage Cut the LACK legs to the height you wish to extend. The "lack_cutting_guide.stl" is useful. It allows you to cut straight. Fix "lack_stacking_1" by screwing it to…
just a little 90 degree attachment for blow air into the pipe under you sink
I lost all my attachments for my Bissell vacuum and the hole is a female 35mm. So normal 35mm tools don't work. I made an adapter so other vacuum attachments will work or I can print my own. Works great Print Settings Printer Brand:…
just print it RR recommendet settings and attach your beacon cable !
This shroud is identical to the model i released minus the borescope. I printed these in ABS and Nylon. I would not reccomend PLA or PETG as per the original Microswiss shroud. For the borescope: The borescope i used is one of the cheap…
Fits my Ryobi R18SV7-0 Vacuum, might work for others. So, the vacuum came with a mounting solution, which was a little too wide for where i wanted to place it. Though it is possible to use the “clamps” as they can be detached from the…
Im not sure how many people this can help because this was designed for an electric knife that is only available in Australia and is an older model, im not sure that it is compatible with newer models. It is designed for the Sunbeam Carv…
Thanks you MC1457. It is good Model. I remix it for Tape attatch (or Clip) and Half Top (Cover) for Easy push button.
this is what the title says
A simple yet effective 6x40 mm fisher plug attachment for your 3d prints you can use this to assemble to your 3d print if you would like to hang it to a fisher nail
This is a Picatinny Nerf Shield Attatchment for blasters that have picatinny rails. This was designed in Onshape and is customizable so you can use whatever material or spacing you need for your blaster. I don't have any official designed…
DAS ( D irect A ttached S torage) It's a case for external HDDs or SSDs using the Dell power edge r320 caddys (and a 55mm fan). Everey version has a hole and space in the back for a usb-c connector to power the fan and some leds. It is…
Designed for hanging and retrieving potted plants originally, but could be useful for hanging Christmas lights or bird feeders. Print on the flat side with the long hook for strength, this is is intended as a friction fit, not a screw…
Removes about 90 precent of dust. Print with rigid material with higher glass transition temperature than pla. Do not use nylon. Abs is a good choice. No supports. You will need a longer screw for the screw hole. The screw size is 8-32
My math teacher has a charging station with multi-purpose cords that always fall on the floor and get tangled, so I decided to fix it. I played around with a few different models that all didn't work, either while I was editing them or…
LOOK AT THE TITLE
This was a fun test of basic design skills, and I would love to hear if anyone has any suggestions for improving the model
The goal of this print is to make placing and removing filament from this HE3D easier and accessible with only one hand. One side has a hinge with a printed bar fits inside of the metal bar that goes with the original holder, this part…
1 organiser for spray gun + nozzels. 1 holder for spraygun. Screws or metal mount not included, i bought those at my local hardwarestore,
Designed for hanging and retrieving potted plants originally, but could be useful for hanging Christmas lights or bird feeders. Print on the flat side with the long hook for strength, this is is intended as a friction fit, not a screw…
I didnt know how to add the two things on the top so I printed an insert to add in and i make it 98% scale (IT NEEDS TO BE AT LEAST 2% SMALLER THAN THE ORIGINAL TOP TO FIT)
