Search results: atto

The Gothic Tattooed Muse

Cattop - A laptop but it's for your cat

I saw a video online where someone gave their cat a cardboard laptop so that it would leave them alone. I wanted to try this theory, but instead of building a laptop out of cardboard like a normal person, I designed and printed this. It…

Gatto 4 Cat wall ornament

Gatto stilizzato da incollare a parete spessore 2mm

Gatto 5 Cat wall ornament

Gatto stilizzato soprammobile o da incollare a parete. Dim: 15cm x 17cm x 2cm

Briggs & Stratton Lawn Mower Ratchet Pawl

Briggs and Stratton lawn mower not starting? Try this replacement ratchet pawl to get your mower started quickly. Print with supports on the bottom and make sure that the hole is opening up.

Gatto 2 Cat Ornament

Soprammobile gatto. Misure: 13,4cm lunghezza, 15,2cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.

Hole Inset Extenders for "whack a mole CATtoy"

These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…

Gatto 1 Cat Ornament

Soprammobile gatto. Misure: 13,5cm lunghezza, 13cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.

Gatto 3 Cat Ornament

Soprammobile gatto. Misure: 11,8cm lunghezza, 17,8cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.

Tattoo Truth

An opinion that many share.

Beverino per gatto

quando ci si assenta per qualche giorno da casa e si lascia il cane o il gatto da soli si può collegare il beverino ad un contenitore di acqua posto in remoto al punto di ristoro

Angel Tattoo HueForge

Beautiful Angel HueForge!! Sized at 5" x 7" but can be scaled to an 8" x 10". Print Settings..... First layer height .16 additional layers .08 First Color - Black Second Color - Dark Grey @ Layer 11 Third Color - Light Grey @ Layer 16…

whack a mole CATtoy (updated)

Funny simple whack a mole game for your cat. From seeing the comments, I have made an update. The axcel can now be locked in place with a printed pin. The model is also easier to print. There is no support needed now. Printed in 0.2…

Tattoo Needle Dispenser WIP

My Friend wanted smth to store his needle cartiged properly... All parts are made as "slide in" components Still wip

Custom Tattoo Ink Cup Holder

Re-Upload of my model from Thingiverse I noticed my tattoo artist spending a LOT of time setting up his work station. I took some notes on how they set up and cleaned up, and came up with a few designs on how to streamline and improve…

Tattoo machine adjustable cartridge grip

To continue on my journey for a fully custom tattoo machine I made a cartridge grip holder to fit any traditional or rotary tattoo machine allowing it to be used with tattoo cartridges. I made a good few grip versions my favourite would…

Attorney's Badge from Ace Attorney

This is based on the badges worn by defense attorneys from the Ace Attorney series such as Phoenix Wright. I modelled it off of the image used in the more recent games in the series.

Tattoo ink cup tray

I tend to do blackwork maybe add a few cups of grey wash. But yesterday I worked on a wee colour piece and managed to spill every one of my cups and had to mix all of them again and again not to mention I hated the cleanup so I thought I…

Handpoke Tattoo Needle Grip

Description I designed and printed this grip because my tattoo artist friend used wooden sticks and tape to secure his needles and it didn't seem comfortable. After doing a bit of research online and consulting him and some other friends…

Vespa Silhouette Wandtattoo Wall ART

Wandtattoo Vespa Roller Größe frei änderbar

Silhouette gatto sul tuo interrutore

Silhouette gatto da incollare sopra l'interruttore della luce, simpatico per abbellire casa per gli amanti dei gatti, in tre differenti posizioni. Ho inserito anche il g.code di tutti e tre con un unica stampa.

Ergonomic tattoo cupholder

You do not need anything simple put it so the feet is looking up. Finally it took me 55 minutes at 50mm/s

Stamp Wheel for Pottery and Bodypaint - Maori Tattoo Pattern

Stamp wheel from the Maori Patterns Collection #10 and a handle These digital 3D printable models of Stamp Wheels are meant to be used as a funny activity for kids and for cosplayers to create Maori-inspired patterns using bodypaint. The…

Chococat (チョコキャット, Chokokyatto) from Hello kitty

Chococat (チョコキャット, Chokokyatto) from Hello kitty You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures

CatToy Balls

Was interesting to do in fusion 360. Works well with pla or a not so soft TPU, enjoy.. I think humans will like it too :) To brim or not to brim...that's the question! works np on my elegoo neptune 3 no brim. but i would put 3mm brim just…

Tattoo Ink rack fits Eternal, Solid and Intenze size bottles

sizes for my 1oz 2oz and 4 oz bottles

Tattoo color bottle holder

Tattoo color bottle holder for 16 bottles

Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile

Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…

Honeycomb Wall mounted ink holder for tattoo ink

60 bottle holder, work in progress Spins on wall Base needs to be printed at 100 infil or drilled through and metal bolt used honeycomb design with inserts for different bottle sizes held together by inserts requires two skateboard…

Tattoo Ink Bottle Holder

An Ink bottle holder for tattoo ink. It is made for 1oz bottles with a length of 1.79mm if im correct. Can be wall mounted with the holes on each end. Made it for my wife at the tattoo shop! The only issue im working on now is the size,…

Busto di Gatto Imperiale Fantasy

Una scultura elegante e originale che raffigura un gatto in stile imperiale, con corona di foglie, drappeggio classico e piedistallo decorativo. Un modello che unisce la regalità delle statue classiche al fascino felino, perfetto per…

Netflix Daredevil Nelson and Murdock Attorneys at Law Sign

This is a Nelson and Murdock Attorneys at Law sign that I designed and printed back in 2016 and finally got around to sharing and finishing. This is from Daredevil Season 1 on Netflix. Make sure to share your builds! Would love to see…

Gatto segna-libro cat bookmark

bookmark

Body for upcycled tattoo machine made using toothbrush/hair trimmer motor

I draw and tattoo my design and a friend asked if I do it with the machine I made. I thought to myself what a great idea and why not make a tattoo machine from some leftover electronics I have left in my house especially as I wanted one…

Heart Tattoo Cups/Ink Well

Heart shaped Tattoo cups/Ink Wells. I saw similar versions on instagram and thought I would try to 3d print my own. First solo heart well is larger and multi is small. These are a custom make, I have a photo of the design printed and it…

Disposable tattoo cartridge holder

There are cartridge holders out there that you can buy for pennies but if you need one and don't have one on hand this might help you out. Obviously, if you tattoo people these should not be ever reused and I guess they should be…

Upcycled Tattoo Machine 2.0 using toothbrush/hair trimmer motor

The V2 version of my upcycled tattoo machine is a bit lower than the last one for better weight distribution bit thicker around the tube as I had a few of them break before when I overtightened the screw I'm not gonna say it's better than…

tatto needle cart dispenser

It gets quite unstable before all of the parts connects at the top, it still worked fine for me. added holes in the back for mounting on a hsw with m3 inserts.

Kid Tattoo Toy

it is split into multiple parts in the stl. pretty snug fit when most of it snaps together and add a little glue to keep in one piece

Tattoo ink station

A tattoo ink station and cartridge holder for pen cartridges. Made on tinkercad. Feel free to modify as necessary. Didn’t see too many models out there for tattoo artists.

spatule grattoir / scrapper

grattoirs différentes variantes soit pour hot bed ou pare brise

Prosecutor's Badge from Ace Attorney

This is based on the badges worn by defense attorneys from the Ace Attorney series. It is only really shown in the Miles Edgeworth Investigations series, where it is explained that most prosecutors choose to just carry it in their pocket…

Leaperkim Patton and Sherman plug grip

sick of trying to orient a round object that only goes in 1 way by holding it on the end of a wet spaghetti noodle from 4 inches away? This is the way it should have been made to begin with but 3d printing to the rescue. print in tpu…

Neo-Trad Tattoo Medusa Wall Art

Cool DXF I found on a free site. It could make a cool stencil, or a piece of wall art.

Gatto 6 Cat wall ornament

Gatto stilizzato soprammobile o da incollare a parete.

Máquina tattoo

Llavero máquina tattoo

BYD Atto3 (2023 Model) Wireless Charger Tray Cooling

I found that my phone got quite warm charging in the wireless charging tray of the BYD Atto3. This is just a problem with wireless chargers in general, but because of the location of it in the car I thought I could do something about it.…

Powiększenie Baterii Briggs&Stratton InStart 775IS #briggsstratton #instart #liion

Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…

Tattoo Pen holder

Tattoo pen holder that is higher than the usual versions, and adds 4 slots for ink pots and 4 slots for needle storage.

Star Wars: Legion Tattooine structure

I very much like the structures Imperial Terrain has put out in anticipation of SW:Legion, I wanted to make a free simple Tattooine structure. I just aped common Tattooine architecture, those guys are pretty simple, then added some vent…

Batton - Batman Button

Nanananananana Nanananananana Bat button for jacket

Duck Tattoo Cap

Simple tattoo ink cap, duck-shaped (words are too complex to describe simplicity of this model) Inspired by model here (visit this page for more shapes) Need it - make it

Apollo Justice Bracelet - Apollo Justice: Ace Attorney - FDM

“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…

Rotary Tattoo Machine

Sourcing parts I sourced the parts from Aliexpress, the BOM is of 30 USD. These parts can easily be replaced with cheaper parts, or sourced from elsewhere. Motor Male jack 6.35mm connector Power cord GX16 male & female connectors Motor…

Josef Prusa's Tattoo

Thought it would look good on the wall behind my Prusa printers....yes I know its the open source hardware logo but thats solid and this is NOT ...lol Print instructions Used PrusaSlicer 2.1.0 with the colour change feature. Used Prusa…

Speedometer cable clamp for Honda Transalp - Africa Twin / Morsetto Cavo contachilometri Applies to/Adatto per Honda Transalp XL600V and XL650V - Africa Twin 650 - 750

Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…

Valve for Air Blower by MattoDesign

This tiny 2-minute print is a one way valve for the amazing Air Blower by MattoDesign . Print it with a flexible filament and insert it in the hole of the air blower.

Grattoir a vitre (icescraper)

Simple grattoir pour les fraiches matinées ;) faites attentions, risque de rayures sur les vitres. je ne pourrait en aucun cas être responsable des rayures (cela dépendra du matériau utilisé et des réglages de votre imprimante) je vous…

Compact portable bit holder - Porta inserti compatto

Compact portable Bit Holder - Mini Porta inserti esagonali compatto Easy to print, optimized filament usage. For Hex ¼ bit driver Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx

Veteran Patton Armor Set

Help Wanted If you print any of these successfully, please leave a comment with the material and settings so that I can update the description accordingly. Background These parts were originally designed by ZEP a.k.a. Maxim (he has no…

Scraper V2 / Grattoir V2

I suggest printing it with a layer height of 0.1 mm for a better finish and edges. See photo of the diffence between 0.2 and 0.1 mm printing. Dimensions Length: 153.1 mm Width: 70 mm Height: 10 mm

Inkcap Tattoo-Tintenstation

Diese Farbkappen habe ich entworfen passend zu der Tattoo-Tintenstation von (Darryl Kane) https://www.printables.com/de/model/591330-tattoo-ink-station Die Farbkappen haben einen dünnen Fuß um einen besserren halt in der Tintenstation zu…

Briggs and Stratton pawl plate

0.4 mm nozzle print flate best with high temp filament PLA will last i have been running one for a year now but noticed that it is loosening up

Solid ink tattoo ink bottle honeycomb mount

1/2oz and 1oz Solid Ink bottle holders for the honeycomb storage wall system.

PIATTO QUADLOCK

Base piatto quad lock compatibile con tutti gli accessori in commercio disponibili Nel mio profilo ci sono altri prodotti da scaricare sempre inerenti a questo articolo

Mast A1 Wireless Tattoo Pen holder

Sick of your Mast Tattoo A1 Wireless Tattoo Pen rolling around? Not sure where your tape is? Sick of ink drips messing up every surface? Just print this! Holds extra needles and ink bottles for easy set up on those pesky 40$ walk in tramp…

Case for the CatTouch Display for the Yaesu FT-991a

The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with. This design is “screwless”. The Boards just snap into…

HOn30 Mattole Lumber Co. 0-4-2 Vulcan.

This is a HOn30 Mattole Lumber Co. Vulcan Iron Works 0-4-2. Made to fit a Aru Models 0-4-0 chassis with rear wheel added. Print body tipped up at 23 degrees and after printing remove rear tab. Category: Hobby

Batto – The Chibi Bat of the Night!

Batto flaps in with tiny wings and a big-eyed stare—ready to bring a little spooky-cute charm to your collection! With its round body and playful design, this chibi bat is perfect for Halloween vibes or as an everyday nocturnal buddy.…

Oliver Atton.CaptainTsubasa

Model of the figure of Oliver Atton (Tsubasa Ozora) main protagonist of the anime and manga series Captain Tsubasa(1983)

Woman in Wall Tattoo Art - Hueforge - Filament Paintinng

A tattoo I saw a couple years ago inspired this image. It came out pretty good. You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out. I started…

Tattoo Ink Holder

My tattoo artist at Dark Water in California wanted to organize their colored inks in their cabinet better so I modeled this to hold up to 28 4oz ink bottles for easy access. This is the second version which is a more stable print than…

BYD Atto 3 vent covers

Covers for the air conditioning vents under the front car seats of the BYD Atto 3/Yuan Plus. Allows you to customise the mesh density to your preference to balance air flow vs. preventing debris from entering the vents. A different design…

Briggs and Stratton Instart Battery adaptor

So if I had my time again I wouldn't bother doing this - I'd just pay the money for the stupid proprietary Briggs and Stratton Instart battery. But once I started I was kinda committed… This project is probably of quite niche appeal, even…

Tattoo Girl HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x240.06mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm…

BYD Atto3 (2023 Model) Cup Holder Riser

The BYD Atto3's centre console cup holder is very deep. This is great if you need to put your Big Boy XXL Double Gulp cup in it, but not so great for ordinary cups. The car comes with a "riser" that can be put in one side, which allows…

War Movies - Patton - M48 Patton Tank - 1970

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

BYO Atto 3 Cup Holder Inserts

Inserts to raise the base on the cup holders for the BYD Atto 3. Two sizes available.

Cute Circus Elephant with tattoos :)

It's simple and funny model of circus elephant. My daughter draw tattoos on him ;) Made with Rainbow PLA Silk Rosa Nozzle size 0.4 layer height 0.16 printed on P1S Some supports are needed under chin and ears. I used tree hybrid support…

Heattower PETG for Prusa XL

I had problems with the standard configuration of Prusa for Prusament PETG, hence the Heattower

Tattoo Ink Tray - Gridfinity

I used: 20% infill supports brim can provide the fusion file if requested

numbers tattoo design

numbers tattoo design

Sherb from Animal Crossing by TroySlatton3D

Original https://www.thingiverse.com/thing:4312715

Air Freshener adapter BYD Atto 3 to Ecoya

Print in PETG. the car can get too hot for PLA. 20% in fill

Fantasy Island - Mr. Roarke & Tattoo - 1977-1984

Fantasy Island - Mr. Roarke (Ricardo Montalbán) & Tattoo (Hervé Villechaize) - 1977-1984 3D printable model.

Practice Tattoo Machine (Pen)

This is a practice tattoo machine that uses some electronics and a Bic 4 colour pen to give you that tattoo style on paper (and skin, just temporarily). I made this for a student who wants to be a tattoo artist and wants to practice the…

Tattoo Machine stand

Holds 3

Terry the Tattoo Tape Trapper [barrier film dispenser]

Love Medical Barrier Film, but hate having it take up space on your desk? Me too! Designed this for the 4” x 6” perforated sheet rolls. This wall mount is designed to have a friction-set dust cover and is usable in either orientation.…

Briggs & Stratton Pinion Gear

Printed from glass fiber reinforced nylon Taulman Alloy 910

Catto Shelf Cat Shelf

Built in Onshape. I wanted to design my own stuff so I started here. Was inspired by people doing similar for their cats using planks and brackets, However I rent so screwing into the wall was not an option. also I didn't want to pay for…

Briggs & Stratton Air Cleaner Gasket

Modeled after Briggs & Stratton Part no: 795629 2 different thicknesses: .05in & .1in Might be the easy fix to your Brigs motor that wont prime Printed in tpu

Tattooed Fairy Tale Earrings - Rose Tattoo Jewelry - An easy filament swap rose tattoo jewelry set

A rose by any other name. We designed these fun rose earrings so they could be printed on any printer in multicolor with filament swaps. Size up or down but watch the size of the post hole. We included the gcode of the set, as well as the…

Gatto BodyBuilder coda biforcuta

Un adorabile e muscoloso gatto che mostra i suoi bicipiti scolpiti! Perfetto come decorazione da scrivania, regalo divertente o mascotte motivazionale. Questo modello unisce la dolcezza felina con la potenza di un vero culturista. 🖨…

The Rolling Stones Tongue Wall Tattoo Dual Color / Multi Extruder

Print in black and red for white walls. Feel free to adjust to your size. Print Settings Printer: Bibo Rafts: No Supports: No Resolution: 0.2 Filament: Sunlu PLA+ Red and Black Category: 2D Art

m48 patton

the jungle wasnt welcoming

Recessed Battop for Sanwa JLF Joystick

Introduction This is a battop for Sanwa JLF with a 17.2mm recession. When installed on the normal JLF shaft, it simulates installing the battop on a short shaft. As a balltop enjoyer, I really like this configuration a lot. This is an…

Jungkook's Hand (BTS) - Iconic "ARMY" Tattoo Sculpture

This is a 3D-sculpted tribute to Jungkook from BTS, featuring his iconic hand tattoos including the "ARMY" knuckles, the "J" initial, the purple heart, and the crown. It makes for a perfect desk accessory, jewelry holder for rings, or a…

Replacement Patton 20" Fan Knob

A simple knurled knob replacement for a Patton 20" fan. Likely works on many more switches and potentiometers. Shaft is a split double-flat style. Detent marker is parallel to flats. Print with base down. Key Dimensions Knurled OD: 30mm…

V2 UPDATE IN PROGRESS - Storage Case with Tattoo Gun Kit and Blank Inserts

STEP BY STEP INSTRUCTIONS IN A PDF IN FILES!! (I put a lot of time into them so plz use!) note: not fully tested due waiting for filament to come! Bill of Materials ------------------------------------------------------------- 10 -…

Tattoonadel Halter

Halter zum Parken von Tattoonadeln. Steckbar designed