1 / 2
Recessed Battop for Sanwa JLF Joystick — image 1
1 / 2

Recessed Battop for Sanwa JLF Joystick

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Recessed Battop for Sanwa JLF

Rating
5 / 5
Likes
15
Downloads
102
Makes
1
Views
551
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution

Introduction

This is a battop for Sanwa JLF with a 17.2mm recession.  When installed on the normal JLF shaft, it simulates installing the battop on a short shaft.  As a balltop enjoyer, I really like this configuration a lot.

This is an idea inspired by folks on the /r/fightsticks Discord.

Future Changes

  • None

Printing Suggestions

  • 4 Walls / 40% Cubic Infill / No Supports
  • 0.1 Layer Height for more detail on the rounded top
  • Only tested in PLA/PLA+, but other materials should work.
  • Recommend enabling polyholes in Orca Slicer – or equivalent
  • I like it with fuzzy skin set to 0.2/0.2
  • You may need to make adjustments based on the tolerances of your printer

Assembly

Remove your current balltop and shaft cover.  Install the shaft cover with a smaller diameter hole and install this battop. Profit.

Happy Printing!

RAF

Tags