Counting matching models…
Sanwa JLF Oversize Actuator Reduces microswitch actuation distance and post actuation throw so that the actuator engages the microswitches and also hits the restrictor sooner. Results in a much tighter stick. Microswitch actuation…
Designed based on the Seimitsu LSX-NOBI-01-STD lever top, threaded for Sanwa JLF TP-8YT-SK. Ever wanted to try a different top on your Sanwa lever, but don't want to pay for shipping since you're unsure if you'd like it? Try printing this…
Printed in PLA with 30% infill and 3 x wall, with switch pins upwards and little support for mounting holes. There are two versions here, one with a slightly larger 22mm hole in case the switches don't work properly, in my case the 21mm…
I needed a gate to replace the rotatable insert in the restrictor-plate of my (cloned) Sanwa JLF-type arcade joysticks. This gate restricts the travel of the joystick to 4way and gives a more guided motion than the plate that comes with…
This is a 40mm diameter, 37mm height joystick ball top designed for arcade sticks and custom fighting controllers. Features: Compatible with Sanwa Denshi JLF and JLX series joystick shafts Standard ball shape for arcade lever tops…
A Remix of "Bat top for Sanwa joystick leber" by user okayumoka. I decided to remix it because upon inspecting their work, the stl files came with no thread, and so, I put a thread on it. Ever wanted to try a bat top on your Sanwa lever,…
Introduction This is a battop for Sanwa JLF with a 17.2mm recession. When installed on the normal JLF shaft, it simulates installing the battop on a short shaft. As a balltop enjoyer, I really like this configuration a lot. This is an…
Sanwa JLF-P1 plate with modified mounting holes to fit a Seimitsu LS-56 / LS-56-01 Allows you to use a Seimitsu LS-56 / LS-56-01 in a arcade cabinet panel / fight stick that typically has a mount to fit a Sanwa JLF & JLF-P1 plate. I've…
Printed in PLA with 30% infill and 3 x wall, with switch pins upwards and little support for mounting holes.
This is a small desk stand for the Sawna JLF arcade stick. The JLF will sit at 67.5° in this stand. The lip for the plate is 2mm wide. I have tested this print on my Bambu X1C with the following changes to a stock configuration: - 0.4mm…
Full Video: Sega AstroCity SanwaJLF Bracket A I recommend printing on the side with a 5-10mm brim/raft Sega AstroCity SanwaJLF Bracket B A pause command needs to be added in your slicer in order to add 2xM4 nuts. Both parts can be glued…
This is a small desk stand for the Sawna JLF arcade stick. The JLF will sit at 77.5° in this stand. The lip for the plate is 2mm wide. I have tested this print on my Bambu X1C with the following changes to a stock configuration: - 0.4mm…
When I got my Chewlix unit there was no spring on the coin reject button. Since I did not have a proper sized spring for it I designed this small spring hat to allow you to use a normal Sanwa JLF spring. Print two of these at 100% infill…
Cette câle est parfaite pour ajuster la hauteur des joystick Sanwa JLF sur les Chewlix. Elle peut même s'adapter à d'autres bornes d'arcade. Pensez à utiliser des vis à tête conique M3 de 16mm.....Et aussi à retourner la pièce sur Cura…
This mod converts a stock Sanwa JLF into a more compact lever assembly while still using many of the original JLF parts. This is not a complete replacement lever. You will need a stock JLF and an OttoDIY kit for the conversion. The design…
I was looking for a way to automatically switch my cocktail table joysticks between 4 and 8-way mode. I found Legochuck's model on Thingiverse ( 4-8 Way Switchable Sanwa Joystick Restrictor Plate by legochuck - Thingiverse ). My joysticks…
Bill of materials: Four M4x35mm and four m4 nuts are required.
