Compact JLF Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact JLF conversion mod using a stock JLF, OttoDIY kit, and PETG printed parts to shrink the lever assembly.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This mod converts a stock Sanwa JLF into a more compact lever assembly while still using many of the original JLF parts.
This is not a complete replacement lever. You will need a stock JLF and an OttoDIY kit for the conversion. The design is intended to reuse the core JLF components, including parts such as the gate, TPMA assembly, shaft, spring, pivot, actuator, and other standard JLF hardware depending on your build.
I recommend printing the parts in PETG. The design uses tabs that benefit from a little flexibility, so PETG is a better fit than more brittle materials like PLA.
Required
Stock Sanwa JLF
OttoDIY kit
Printed compact conversion parts
Reuses JLF Parts
JLF gate
TPMA switch PCB assembly
Shaft
Spring
Actuator
Compatible standard JLF hardware
Assembly
The OttoDIY cup and pivot insert from the bottom. The printed retainer sits between the OttoDIY assembly and the TPMA PCB, keeping the OttoDIY parts in place once the PCB is mounted.